Manualslib BOSS SD1 User Manual
BASIC OPERATION BUTTONS
LIGHT/CLEAR BUTTON
Turns the light on for 5sec. In TIMER mode press and hold to reset TIMER.
MODE/SET BUTTON
Switches MAIN modes. In SETTING mode: Press & hold to edit the settings.
START/STOP/ SUB MODE FORWARD/+ BUTTON
In TIMER mode: Starts or Stops timer. Switches SUB modes (FORWARD) In SETTING mode: Increases values (press & hold to fast forward value selection). Hold to turn the Heart Rate Lock ON/OFF.
SMART TOUCH SENSOR
Touch anywhere on the sensor to take your heart rate.
SUB MODE BACKWARD/-BUTTON
Switches SUB modes (BACKWARD) In SETTING mode: Decreases values (press &hold to fast backward value selection).
SCREEN DISPLAY
- The sensor needs to be dried
- Heart Rate
- Low Battery
- Hourly Chime
- Alarm
- % of Maximum Heart Rate
- Heart Rate Lock
- Time Mode
- Pedometer Mode
- Exercise Timer
- Settings
- Memory Mode
©2014 Borofone. All rights reserved. Borofone, the Borofone logo, and other Borofone marks are owned by Hoco. and may be registered. All other trademarks are the property of their respective owners.
DISCLAIMER
The material in the instruction guide & website is for information purposes only. The SD1 watch described is subject to change without prior notice, due to the manufacturer’s continuous development program. The SD1 watch & instruction guide is intended to support a sensible approach to health & fitness. They are not intended to replace professional medical advice related to diet, exercise, or weight loss.
Physical enterprises shall not be liable for any damages, direct or incidental, consequential or special, arising out of, or related to, the use of the SD1 watch & accompanying documents. If you experience severe or prolonged discomfort or pain at any time, see your doctor immediately. The information in the instruction guide is intended to be used as a general guide only & may not be appropriate for specific users. In particular: maximum heart rate. Consult a doctor to determine your personal maximum heart rate. Borofone uses complex formulae that generally predict the hr based on studies of subjects with healthy hearts. The percentage of maximum calculations is not to be relied upon especially.
if you have a history of heart disease, stroke, high or low blood pressure, diabetes, asthma, or other circulatory or respiratory conditions. Calorie target & expenditure: Reliance on inappropriate intake & expenditure targets may result in excessive weight gain or loss, fainting, dietary deficiencies, or other adverse medical consequences. Consult a doctor to determine what caloric intake & expenditure targets are appropriate for you. The SD1 watch, while designed to provide an EKG-accurate heart rate, is neither designed nor warranted for medical use & should not be relied upon for medical purposes. Always consult a doctor before beginning a new exercise regime or diet program of any kind.
ACTIVATING SD1
- Remove your SD1 from the packaging and peel off the protective film on the display.
- Press and hold the START button (the upper right button) to wake up the watch. The display will be switched on.
QUICK START
To get started, your SD1 will ask you to set several parameters.
- » Press + or – to increase and decrease the values
- » Holding + or – will rapidly change the values
- » Press SET to confirm the value and move to the next parameter
For detailed information on setting up your SD1, please see Section 14. Borofone Tip: Locking the heart rate sensor will prevent unwanted heart rate readings while setting up the watch. See Section 8 for more information.
Time
- » Hour (12 hour format)
- » Minute
- » Second (whenever + or – is pressed the second will be reset to zero)
- » Hour format (12 hour or 24 hour format)
Date
- » Date format (Month-Day or Day-Month)
- » Year
- » Month
- » Day
Personal Information
- » Unit Format (KG/CM or LB/IN)
- » Body Weight
- » Height
- » Gender (Female or Male)
- » Birth Year
After finishing the quick first-time setup, the watch will go to Time mode You can switch the display between time and date/weekday in Time mode by pressing the + or – button. For daily usage, you don’t need to fasten your watch too tightly on your wrist. During intensive exercise, we recommend that you tighten the watch band for better heart rate readings.
BEFORE USING
SD1’s Smart Touch Heart Rate (HR) measurement is EKG-accurate, however, this product is not a medical device. You should always consult your doctor before starting any new fitness regime, if you are planning to use the product while pregnant, or if you have a pacemaker fitted.
MODES OF OPERATION
Your SD1 has 5 main modes. You can press the MODE button to move to the next mode. You can take your Heart Rate from any mode (except while changing settings).
TIME MODE
Displays 12/24 hour time, date, and weekday
LIMITED ONE-YEAR WARRANTY
Borofone Innovations LLC warrants the workmanship and all parts of this product against material or workmanship defects for a period of l year from the date of original purchase for use. This warranty should be effective only if the warranty card is fully completed and mailed to the authorized dealers for registration. The consumers return the defective product to the authorized dealers in your country for repair or replacement after getting a response to the completed warranty card from the authorized dealers.
This warranty is null and void if the unit and or its components therein have been damaged or tampered with by improper handling use or unauthorized repair in all cases of damage during shipment for repair. A claim must filed with the shipping carrier by the purchaser .and not with Borofone Innovations LLC in all events the manufacturers agree to repair of replace the defective parts but never to exceed the Purchase price as said. As this is a limited warranty. Borofone Innovations LLC’s liability for consequential and incidental damages is expressly disclaimed and shall not exceed the purchase price paid.
SPECIFICATIONS
- » 12/24 hr clock (date & weekday)
- » Daily alarm
- » Exercise Timer: 99 hr 59min 59sec
- » Max Heart Rate Percentage: 99%
- » Max Readable HR: 230 BPM
- » Min Readable HR: 30 BPM
- » Water Resistance: 50 meters
- » Lens: Acrylic
- » Watchcase: ABS
- » Caseback: Stainless steel
- » Strap: Medical silica gel
- » Buckle: Stainless steel
- » Battery: Lithium type CR.2032
- » Expected Battery Life: 1 year
Specifications Subject to change without notice
CARE AND MAINTENANCE
- » Never attempt to disassemble or service your watch.
- » Protect your watch from extreme heat, shocks, and long-time exposure to direct sunlight.
- » Watch can be wiped clean with a lightly moistened cloth. Apply Mild soap to the area if there are stubborn stains or marks. Do not expose your watch to strong chemicals such as gasoline, clean solvents, acetone, alcohol, or insect repellents, as they may damage the unit’s seal, case, and finish.
- » Store your watch in a dry place when you are not using it.
- » Avoid allowing the watch to come into direct contact with hair liquids, colognes, sunblock creams, and other toiletries, which can cause deterioration of the plastic parts of the watch. Whenever the watch comes into contact with these or other toiletries, wipe it off immediately with a dry, soft cloth.
- » Do not wear your SD1 in the shower/sauna or other similar environments.
- » Do not push buttons underwater.
SMART TOUCH TECHNOLOGY
With SD1 Smart Touch Technology, obtaining your on-demand heart rate has never been easier. You can get a reading by placing your fingertips, palms, or just about any part of your hand on the stainless steel sensor. Experiment to find your own preference. A one-time readout of your Heart Rate (HR) in beats per minute (BPM) will display. The small digits at the right of the display show the percentage of your maximum heart rate (up to 99%).
- » For continuous reading, keep pressing the sensor.
- » For best accuracy, left and right hands should not be in contact during the test.
- » You can take your Heart Rate from any mode (except while changing settings).
TROUBLESHOOTING POINTERS
If you don’t get your heart rate (HR) within 10 seconds, moisten your finger(s) watch the case back, and try again. It helps to wear your SD1 for a little while to allow a layer of moisture to build up between the back of the watch and your arm/wrist. Exercising vigorously with a lot of arm movement or body motion can cause muscle noise” that may prevent proper detection of an HR signal. You should tighten the watch to your wrist and apply a stronger force to the top metal plate in order to reduce the movement of the watch during the exercise.
Also, relax your watch arm when taking the reading. If your HR varies, note that fluctuations are normal in a healthy heart; in fact, the healthier your heart is, the more variation you can see. However, if SD1’s calculations start to vary significantly from what you have come to expect, replace SD1’s battery. To optimize readings, occasionally clean the back of your SD1 case and the Sensor Ring with a clean, soft cloth.
EXERCISE TIMER MODE
Your SD1 has an easy-to-use exercise timer that helps you manage your exercise sessions and monitor your heart rate. There are 3 types of timers. Choose the one that is suitable for your exercise:
- Count up from zero
- » Count down to zero and stop
- » Count down to zero and repeat (up to 99 times).
There are 5 options for Exercise Type: None, Warm Up, Burn Fat, Fitness, and Training. The timer will determine an HR zone (upper and lower limit) for you based on your Exercise Type setting. You can disable the HR zone alert by selecting None in Exercise Type. If you wish to override the predetermined upper limit and lower limit, you can use the + or – buttons to adjust the values. If your HR is out of the HR zone, audio & visual warnings will alert you.
OPERATING IN TIMER MODE
- » Press SET twice from Time mode to enter Timer mode
- » Press the START button to start the timer
- » Press the STOP button (the same button as START) to stop/pause the timer
- » You can resume the timer by pressing the START button again
- » To reset the timer to zero, press and hold the CLEAR button for 2 seconds (all digits will become zero)
- » The timer will also be reset to zero at midnight daily.
Note: When the time is under one hour, it will show 1/100th of a second. Once the time reaches one hour, it will show HOUR: MIN.SEC instead. The timer default is 5 min. Maximum is 9 hr, 59 min, 59 sec.
TO COUNT UP FROM ZERO
(suitable for walking or exercises that require timing)
- » The timer must be stopped.
- » Hold SET until beep (2 seconds).
- » Press + or – to adjust the TIMER TYPE to UP. Press SET.
- » Press + or – to adjust the EXERCISE TYPE. Press SET.