Angelcare BT-01 Bath and Room Thermometer User Manual
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Angelcare Baby Bath & Room Thermometer
the Angelcare Baby Bath & Room thermometer allows you to easily determine the ideal temperature for your baby’s bath water or room. Gently shake the thermometer to turn it ON, the temperature will be displayed and it is ready to use. Without any activity, after 30 minutes, it will automatically turn OFF to power-saving mode.
For use as a Bath Thermometer
Fill the bath to a safe level for your child and ensure the water is thoroughly mixed to avoid hot areas and obtain an accurate reading. Place the thermometer face up in the bath water. The temperature will be displayed within a few seconds. At a temperature of 39.0°C or higher the LCD screen will display ‘HOT’ and a red light will flash to alert that the water temperature is too high for a baby and could get burnt.
A comfortable bath temperature for a baby is between 35.0°C and 38.0°C. At a temperature of 32.0°C or lower the LCD screen will display ‘COLD’ to alert that the water temperature is too low for a baby. The thermometer is safe for your baby to play with in the bath with parental supervision as it is designed to Toy Safety Standards. On removal of a thermometer from the bath, clean and wipe with a dry cloth or towel, and only use non-abrasive cleaning agents such as soapy water if required. Do not immerse in water when cleaning.
WARNING
This product contains a Button or Coin Cell Battery. A swallowed Button or Coin Cell Battery can cause internal chemical burns in as little as two hours and lead to death. Dispose of used/waste batteries immediately. Keep new and used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
CAUTION
Do not leave the child without adult supervision. Always check the temperature of the water before placing the baby in the bath. Only to be used in water in its fully assembled state. Remove the battery during long periods of non-use. Leakage and corrosion can damage the product. Use a battery of the same or equivalent type and ensure correct polarity when inserted noting the positive terminal (+) always faces up in the battery compartment. Do not short-circuit battery terminals. Always make sure the battery compartment is secure and sealed. Do not use rechargeable batteries.
Changing the Battery
After about a year the CR2032 battery may go flat and the display may dim or not appear. Open the cover at the bottom of the thermometer using a coin or similar in the direction indicated on the cover. Insert the battery and ensure the positive sign on the battery (+) is facing up (diagram Fig.1). Replace the cover and ensure the seal is in place and tighten the cover in the opposite direction to the opening as indicated on the cover. If the seal is damaged in any way or letting in water stop using the product immediately.
Technical Data
- Model BT-01
- 1 x CR2032 DC 3.0V Battery
- Temp. accuracy: ±1°C
- Temp. measurement and storage range: 0°C – 50°C, no restriction in humidity.
- Display resolution: 0.1°C
- IP27 rated
PROTECT THE ENVIRONMENT
The wheelie bin symbols mean that according to local laws and regulations, your product and/ or its battery shall be disposed of separately from household waste. When the product/battery reaches its end of life take it to a collection point designated by local authorities. The separate disposal and recycling will help conserve natural resources and protect human health and the environment.
Electromagnetic Fields (EMF)
The Angelcare Baby Bath & Room Thermometer complies with all standards regarding electromagnetic fields (EMF). If handled correctly and in accordance with the user instructions supplied, the device is safe to use based on scientific evidence available today.
Contact information
IMPORTANT! This Angelcare Baby Bath & Room Thermometer is a personal care product. Please do not return this product to the store. If you have questions or need help, please call your distributor before returning this product.
REFERENCE LINK
https://angelcarebaby.com/us_en/angelcare-baby-bath-and-room-thermometer-1
