TRIBIT BTS31 Portable Wireless Speaker Manual
Packing List
Product Illustration
Charging
To Charge the Speaker
Connect this speaker to a 5V power outlet via the providing USB-C charging cable.
To Charge Other Devices
Connect the speaker with your USB-enabled device via a USB-A charging cable(not included).
Charging Indicator / Battery Indication
Button Controls
Power on/off
Bluetooth Connection
- The Storm Box Pro Speaker will automatically connect to the last 2 paired devices again if available. If it fails, the speaker will enter to pairing mode.
- You can connect this speaker with multiple devices and control the connection via t Bluetooth button.
- The speaker can remember up to 8 paired Bluetooth devices.
- Better still, it can connect to 2 devices simultaneously at a time.
Conversion between 2 Connected Devices
- Pause the play back of the current device
- Play the audio file of the other device
Volume Adjustment
Multifunctional Button (MFB)
XBass Function
Short press the xbass. button to activate the XBass function, then the XBass indicator will glow white.
Short press this button again to turn off the XBass function, and the XBass indicator will light off.
Party Mode
- Make sure both of two speakers are turned on.
- 2)Press and hold the button of one speaker for Ss to enter pairing status, then press and hold the t button of the other speaker for Ss to search for Bluetooth devices. At this time, you’ II hear a “Party mode” sound and the speakers enter party mode.
Note: The function of party mode can be realized only when you have 2 Tribit Storm Box Pro speakers.
stereo Mode
- Make sure both two speakers have entered party mode.
- Short press the t button on any of the two speakers.
- When you hear the voice of “Stereo Mode” , one speaker sounds “Left Channel” and the other sounds “Right Channel” , the stereo mode is activated.
Note: The function of stereo mode can be realized only when you have 2 Tri bit Storm Box Pro speakers.
Conversion between Party Mode and Stereo Mode
Short press the t button on any of the two speakers.
Disable the Party Mode or Stereo Mode
Press and hold the t button for Ss on any of the two speakers, then both will re-enter Bluetooth pairing mode.
Factory Reset
Press and hold the Volume-and +button for Ss simultaneously to clear the pairing list and all settings, and the speaker will restore factory state.
Specifications
- Bluetooth Version 5.0
- Output Power 40W
- Frequency 60Hz-20KHz
- Battery Type 7.4V/5000mAh Lithium battery
- Charging Time 7 hours @5V/2A
- Dimensions 96 x 96 x 180 mm
- Waterproof Grade IP67
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment hos been tested and found to comply with the limits for a Closes B digital device, pursuant to Port 15 of the FCC Rules. These limits ore designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which con be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into on outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
