You are currently viewing Honeywell C2 Wifi Security Camera User Manual

Honeywell C2 Wifi Security Camera User Manual

Honeywell logo

Honeywell C2 Wifi Security Camera User Manual

Honeywell C2 Wifi Security Camera Product image

Installation

Download the Honeywell Home app
Note: Have your Wi-Fi password available before installation.

  1. Make sure Bluetooth is enabled on your mobile device.
  2. Search for Honeywell Home in the App Store or Google Play.
  3. Download the Honeywell Home app.
    Launch the Honeywell Home app
  4. Launch the Honeywell Home app.
  5. Create an account (if necessary), or sign in to your Honeywell Home account. Tap ADD DEVICE or the plus sign.
  6. Select the C2 Wi-Fi Camera to install, then follow the instructions in the Honeywell Home app to name the camera and its location.
    Connect the power cord
  7. Plug the power cord’s micro USB end into the camera.
  8. Plug the power cord’s USB end into the wall outlet adapter, and plug your camera into a power outlet.
  9. Wait until the LED on the camera blinks blue (about 1 minute), then tap NEXT.
    Honeywell C2 Wifi Security Camera Fig 1

Note: If the LED turns solid red, it means the connection mode timed out. Unplug the camera and plug it back in.

Connect

Connect to mobile device

  1. Enable Bluetooth on your mobile device.
  2. The app will look for the camera. For one camera, it will connect automatically. For more than one camera, the app will prompt you to select one camera at a time. Each camera has a unique MAC ID printed on the back. Use that ID to select the camera you want to connect.
  3. A QR code will display in the app. To connect your camera to the app, hold the QR code approximately 3-6 inches (7-15 cm) from the camera lens.
  4. The camera LED turns purple and the camera beeps.

Honeywell C2 Wifi Security Camera Fig 2

Options

Choose your Geofencing and Honeywell Home Membership options (if you skip them you can change them easily later).

Low Battery Notification
When doorbell batteries are low the bottom edge of the halo light flashes yellow every 6 seconds until the batteries are replaced. When the push button batteries are low, two beep sounds are heard after the normal tune.

Placement

With Stand
Place the camera in a desired location for viewing and recording.

Honeywell C2 Wifi Security Camera Fig 3

On the Wall
You can also mount the camera directly to the wall without the stand.

Operation

Honeywell Home app experience
When you launch the application, your Home screen is displayed. All of your devices (cameras, thermostats, water leak detectors, etc.) are displayed. Select a camera from the list to view live video from that camera.

Honeywell C2 Wifi Security Camera Fig 4

Testing smoke/CO alarm detection
If your smoke or carbon monoxide alarm goes off and your camera is on, it will send you an alert that a smoke or CO alarm has been detected. To test this feature, press and hold the Test button on your smoke/CO detector for at least 5 seconds or 3 cycles of the detector’s alarm. A shorter test might not
trigger a sound event. For a list of compatible alarms see Resideo.com.

Status LED

The camera has an LED that gives the device status.

Honeywell C2 Wifi Security Camera Fig 5

1-year limited warranty

Resideo warrants this product, excluding battery, to be free from defects in workmanship or materials, under normal use and service, for a period of one (1) year from the date of first purchase by the original purchaser. If the product is defective, (i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it; or (ii) call Resideo Customer Care at 1-800-633-3991.

Resideo’s sole responsibility shall be to repair or replace the product within the terms stated above. RESIDEO SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY RESIDEO MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE ONE-YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. If you have any questions concerning this warranty, please write Resideo Customer Care, 1985 Douglas Dr, Golden Valley, MN 55422, or call 1-800-633-3991.

FCC Regulations

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance.

Such modifications could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 millimeters between the radiator and your body.

REFERENCE LINK

https://www.honeywellhome.com/us/en/products/security/security-cameras/c2-wifi-security-camera-rchc4400wf1004-u/

DOWNLOAD PDF

Honeywell C2 Wifi Security Camera User Manual

Leave a Reply