Donerton C5S Stereo Wireless Earbuds User Manual
Brief introduction
Thank you for purchasing the C5 wireless earbuds! The C5 uses the newest technology supports all functions by touch control and has exceptional audio quality. The C5 focuses on improving and enhancing user experience by providing a comfortable fit and ergonomic in-ear design. It is designed to fit the auricle perfectly so that the user is free from pressure and distending pain during prolonged use. With the Portable and Wireless MagSafe charging, you can enjoy charging anytime and anywhere. For the best user experience, please read this manual carefully before initial use of the C5 earbuds.
Safety Rules
- For safety, please comply with the rules mentioned in this manual
- Keep the device away from sharp edges, uneven surfaces, metal objects, and knocks.
- Do not open, dismantle, or attempt to repair the earbuds. Doing so may cause accidental fire, electronic board failure, or damage to the earbuds. All warranties will be canceled.
- Do not wipe or clean the earbuds with oils or any volatile liquids.
- Do not use the earbuds in places where potential personal safety is at risk or in danger.
Packing details
- C5S Bluetooth headset 1 pair
- Charging Cable 1
- Medium silicone ear cap 1 pair
- Small silicone ear cap 1 pair
- Instruction manual 1 serving
- Charging storage box 1
- Hanging rope 1
- Packing box 1 set
Product Information
- charging storage box
- cavity
- battery display
- charging display
- microphone
- silicone ear cap
- silicone plug
- headphone work indicator
Quick Start Guide
- The headphone wearing me method R/L is printed on the earphone case, please wear it in the correct direction, the sound quality will be better!
- Connect to Phone:
- A. Take the earbuds out of the charging case and remove the PET insulator. Put the earbuds back in the charging case to activate. The earbuds will now power on automatically once you take them out of the case
- B. Put the L and R earbuds into your ears. The L and R earbuds will find each other and pair. Next, the tone”connected will be heard.
- C. When the two earbuds successfully pair, the tone”Left channel, Right channel” will be heard Activate Bluetooth on your phone. On the device list, connect to the”Touch Two and then the tone second device connected will be heard
- How to use the single ear: Take out the single earbuds from the charging box to enter the red and blue lights alternately which is the connection succeeded. If the Bluetooth device name is not found, touch the surface twice to search and connect.
ATTENTION:
PARING TO THE PHONE IS ONLY REQUIRED FOR THE FIRST TIME YOU CONNECT. AFTER THE FIRST TIME THE EARBUDS WILLAUTOMATI CALLY CONNECT YOUR PHONE WHEN YOU REMOVE THEM FROM THE CASE
Touch Functions:
Next: Double click on the right ear touch surface. Volume reduction: Long press 2S of right ear surface.
(Note： Left and right devices can be operated） Activate voice assistant: Continuously click the touch panel three times (Note： in standby mode） Call function： Click once on the touch surface to answer or hang up the phone. Reject the call: Double-click on the touch surface Play or pause music： Click once on the touch area
Charging Case
- A. Put the earbuds into the case exactly, the battery box will automatically charge the earphones until they are full.
- B. The charging box has a smart switch function. Place the earbuds in the charging box and cover the case which is charged. When the charging box is opened, the charging will be turned off automatically. The earphones will start up and connect back to the mobile phone when you pick up the earbuds from the open box. Then you can listen to music and enjoy the intelligence of this product.
- C. USB outlet supports 5V/1.5A output, which can provide emergency charging for mobile phones and other electronic products
Single Earbud Mode:
The L/R Earbud can used alone to connect to your Phone. On your phone, enter the Bluetooth device connection list and remove the”Touch Two C5 ” from the list. Redo the steps for Connect to Phone” but with only the L/R earbud
Product Parameter
Earbud parameters:
- Bluetooth Version: 5.0
- Operation Voltage: 3.2V-4 2V
- Impedance: 32Ω
- Speakersensitivity: 105db
- Speaker Bandwidth: 20-20 KHZ
- Microphone Sensitivity: -42+-2db
- Earbud frequency: 2. 4-2.48GHZ
- Compatible: A2DP/HFP/HSP/AVRCPEarbud
- working range: 10M
- Single talk time: 6hrs
- Music play: 4-5hrs
- Single earbud standby time: 80 hrs
Charging case Parameters:
- Large capacity battery
- DC Charging Voltage: DC5V
- DC charge Current: 1A
- DC Output Current: Maximum 1. 5A
Troubleshooting Guide
| malfunction | the reason | Solution |
| Unable to start | Low battery | Charge the headset |
| Silent after matching | Match operation is incorrect | Rematch |
| Can talk, but red indicator illuminates | The battery is low, Bright red indicator | Clear the headset immediately |
| Charging without prompt | The headphones are not put well | Check if the headphones are in place |
| Headset Automatic shut-down | Low battery | Charge the headset |
| Headphones have echo | The volume is too high or the envi ronment is to o noisy | volume adjustment Or change places |
| The call has a noise | Caused by environmental interference or Sound source equipment is far away | Change place or will The distance of the source device is close |
| The other party’s voice is small | The headset is not worn correctly | Adjust the position of the headset And adjust the volume |
| Bad signal, Intermittent | Too far or outside interference | Put the phone closer to the main earb ud or keep ifrom the oute r inter ference signal |
