Apeman C680 Dual Dash Camera For Cars User Manual

Apeman C680 Dual Dash Camera For Cars User Manual

Product Description

Package Contents

1.  Camera
2.  Suction Mount
3. Car Charger
4. USB Type-C Cable
5. Crowbar

Camera Overview

1.  Loudspeaker
2. Front Camera
3. Cooling Hole
4. Suction Mount Slot
5. USB Port
6. GPS Port
7. Power
8. Menu
9.  Audio
10. Lock
11. Interior Camera
12. IPS Screen
13. Reset
14. Microphone
15. Card Slot
16. Cooling Hole

Product Installation

• Please insert the MicroSD card in the correct direction. Please note that all memory cards must be formatted before first use.
• MicroSD card specifications: 32GB to 128 GB, Class 1 0 or above.
• When using the MicroSD card, please format it to the FAT32 file system on the PC. If you are not sure how to format the card, kindly search “how to format MicroSD card on PC” online.

• Connect the camera with the suction mount as shown below, then check if it’s well connected.

• Remove the protective film and attach the suction mount to the front windshield behind the rear view mirror. Turn the knob in the direction shown to secure the suction mount in its firm position

• Use the car charger cable to connect the camera to the cigarette lighter socket. The wiring below is for your reference.

Product Operation

Make operation easier by following the bar on the right side of the screen.

Camera Startup

• Manual Startup: After connecting with the USB cable or car charger. the camera can be activated by pressing the Power button for 1 second.
• Auto Startup: After connecting with the car charger. the camera can turn on and start recording automatically when the engine starts and turn itself off when the engine shuts off.
  

Camera Recording

•  Start Recording: The camera will automatically record when it is turned on. A flashing blue light means that the camera is recording.
• Stop Recording: Press the first button to stop recording.
• Loop Recording: Where there is insufficient space on the memory card, the “loop recording” function automatically overwrites the oldest file on the memory card, replacing it with a new recording.
•  Protected Recording: When the G-sensor detects a collision, the important footage currently being recorded is automatically locked to avoid it to be overwritten by loop recording. You can also press the orange button during recording to instantly lock the video you want to save

Video Playback and Deletion

• Playback on camera: Stop recording first and press the second button to enter the menu. You can find your recordings in the Playback folder.

• Playback on PC: You can either use the original USB cable to connect the camera to the PC or use a card reader to read MicroSD card data on the PC.
•  Delete a video: After entering the playback screen, long press the “Enter” button on the far right to enter the delete option. As the picture shows.

Change Settings:
Pause recording first and press the second button to enter the menu. Entering the Setup screen and then change settings.

Important Functions Introduction

Parking Monitoring
Please tum off this function while driving. With this function on, the device will automatically record whenever it detects car vibration. Use of the Parking Guard for long time periods will require a hardwired connection for the dash cam, in order to connect it to the ACC and GND of the fuse box safely and to provide the ongoing power required. Kits for this can be purchased separately.

Headlight Warning
If the headlights dim or are otherwise outside of normal parameters, the camera will show a flashing icon and deliver an audible warning to alert the driver to the anomaly.

About GPS
The GPS function is an additional function of this product. If you additionally purchase an external GPS antenna that is compatible with this product, you can use this function. You can usually find the purchase information of the matching GPS antenna on the product page where you purchased the C680 dash cam.

Product Specification

REFERENCE LINK

https://apemans.com/