Carbest-851007-MPPT-Solar-Charge-Controller-User-Manual-Feature-Image

Carbest 851007 MPPT Solar Charge Controller User Manual

Views: 44
Table of contents show

Carbest-logo

Carbest-851007-MPPT-Solar-Charge-Controller-User-Manual-Image

Carbest 851007 MPPT Solar Charge Controller User Manual

FUNCTION

This BT module is an accessory of the MPPT solar charge controller 851005/851006. The controller sends its working parameters to your mobile phone through this Bluetooth module. Please download the free APP Charger Connect.

CONNECTION METHOD

Plug the cable of the BT module into the Bluetooth interface of the solar controller and install the BT module in any position where you have easy access to. The BT module cannot be installed in a metal shield.
Distance to your phone should be less than 10 meters.

APP OPERATION INSTRUCTION

Connection only via APP! Direct pairing via the Bluetooth function of your smartphone is not possible!

  • Step 1: Scan QR code, download APP and install it on your smartphone. (Mobile phone requirements: Android: Version 5.0 or above. IOS: Apple 4.0 or above)
  • Step 2: Please make sure that “Location” and “Bluetooth” function are ON.
  • Step 3: Run APP, search for BT10 and dick to display the device BT10.
  • Step 4: The working parameters of the MPPT solar charge controller can be displayed now.
NOTICE
  1. Connection only via APP! APP will automatically search for Bluetooth devices.
  2. The second phone can start its pairing after the first pairing phone exit APP and disconnect Bluetooth.
  3. Some phones may need to try several times before connection is successful.

Carbest-851007-MPPT-Solar-Charge-Controller-User-Manual-Image-1

SCAN QR-CODE TO DOWNLOAD APP ON YOUR SMARTPHONE:

  • ANDROID

Carbest-851007-MPPT-Solar-Charge-Controller-User-Manual-Image-2

  • IOS

Carbest-851007-MPPT-Solar-Charge-Controller-User-Manual-Image-3

Carbest-851007-MPPT-Solar-Charge-Controller-User-Manual-Image-4

TECHNICAL DATA

  • Input Voltage: 5V
  • Distance: < 10 m
  • Standby Current: <10 mA
  • Cable length: 3 m
  • APP name: Charger Connect
  • Connect-ID: BT10

FAQS

What is the purpose of a MPPT charge controller?

The MPPT charge controller ensures that the loads receive maximum current.

What are the techniques for MPPT solar charge controller?

Perturb and Observe (hill climbing method), Incremental conductance, Fractional Short Circuit Current, Fractional Open Circuit Voltage, Fuzzy Control, Neural Network Control .

Can a solar charge controller work without a battery?

While it’s technically possible to run an inverter without batteries by connecting it directly to a renewable energy source.
What are the disadvantages of a MPPT charge controller?
  • Higher cost: Due to the advanced technology and additional circuitry required for maximum power point tracking, MPPT controllers tend to be more expensive as well.
  • Complexity: More circuitry and components, making them more prone to breakdowns compared to simpler PWM controllers.

What is the work mode of solar charge controller?

What is the principle of solar charge controller?

These controllers dynamically adjust their input parameters to continuously find the maximum power point on the solar panel’s voltage-current curve.

What are two main functions of charge controllers?

Charge controllers are crucial in BIPV systems to prevent batteries from being damaged by overcharging and over-discharging by controlling the current flow from and to the batteries.

Can I disconnect battery from solar charge controller?

In fact, it can destroy the charge controller. If there is no switch to disconnect the solar panels from the controller, I would install one. It is not hard.

What is the advantage of MPPT solar charge controller?

MPPT controllers provide more power, especially in colder temperatures.

DOWNLOAD PDF

0b97592981a5f71844c937bfa5bba4384bc8c1d6d0195e99497724edc519c7d4_optim

Tags: , , , ,

Leave a Reply