VISIOTECH CB160 Smart PTZ Camera User Manual
Product Appearance
Quick Start
Download and install
the App The smart PTZ camera supports Android and iOS apps. For your best experience, please scan the QR code below, and follow the instructions to complete the user registration.
Add the device
Sign in to the App connect to Wi-Fi and add the device according to the prompts.
Set Up the Camera
Click the “Add Camera Now” in the App and enter the Wi-Fi network name and password that you want the camera to connect.
To ensure a longer distance connection, the camera only supports 2.4Ghz Wi-Fi with stronger wall penetration capability and does not support Wi-Fi for enterprise¬level authentication currently. Please ensure that the entered Wi-Fi meets the requirements. After completion, click “Continue” to generate the QR code for pairing the camera.
Connect the power cord of the camera, and the camera will start to scan the code after a short reset process. After you hear the corresponding prompt, target the camera at the QR code of the mobile App, with a distance of about 20cm (about 7 inches) until the camera emits a “Di” sound, which represents the scanning has succeeded and the pairing is started.
After a while, the camera will give out a prompt sound of a successful connection. At this moment, please set the name for the device on the App and select the location you want to place the device. Click “Continue” to complete the pairing.
Possible problems with binding:
When you hear the “Wi-Fi Password Error”, please check whether the Wi-Fi password you entered in the App is correct; When you hear the “Authentication error”, please ensure that your Wi-Fi network is not an enterprise-level network connection mode, and the device supports only the network with the security level below WPA-2;
When you hear the “Wi-Fi not found”, please check whether you select or enter the correct Wi-Fi name, place the device near the Wi-Fi router, and ensure that the router is powered on; please note that 5Ghz Wi-Fi cannot be searched by the device; When you hear the “retrieving IP timeout”, it indicates that the number of devices connected to the router in your home is too excessive to connect more devices. Please remove some of the connected devices that are not commonly used or restart the router to clear the unconnected devices whose lease has expired.
You may need to contact the router administrator; When you hear the “Cloud service connection fail”, please check whether your router is connected properly to the external network, and it is common that the network disconnection or the selected router in your home is a local area network server.
Install the Camera
You can place the camera on a shelf or other surfaces to use, or you can install it on a wall to use.
Select a good spot for your camera
Select a good spot for your camera, please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the Wi-Fi network.
Install the bracket
When you need to view the camera with other family members or friends, you can use this function. Only the administrator whose account is bound with the camera for the first time can share and set the device. Other members can only view the live or playbacks of the device.
- Find the camera you want to share on the App homepage or camera settings page. Click the share button and enter the sharing page.
- Click “Invite”, and a QR code will be generated for sharing.
- For the members you need to share, find “Add a Friend’s Camera” on the “User” page to enter the scanning page.
- Scan the QR code on your mobile phone, and your share will be completed after you agree.
Specifications
| Item | Specifications |
| Horizontal angle | 355° |
| Vertical angle | 110° |
| Camera Lens | Field of view 100° |
| Image resolution | 3MP or 1080P |
| Video bit rate | Adaptive |
| Image coding standard | H.264/H.265 |
| Audio | Duplex two-way audio intercom |
| Storage media | Micro SD card (Up to 128GB) |
| Night vision light source | Infrared light |
| Network | Wi-Fi (2.4GHz 802.11b/g/n) |
| Power | DC 5V/1A |
| Operating temperature | -20 ~ 55° C |
| Size(LxWxH) | 72X72X120.5(mm) |
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body: Use only the supplied antenna.