Table of contents
show
Corsair HARPOON RGB WIRELESS GAMING MOUSE
CHARGING THE MOUSEIMPORTANT:
The HARPOON RGB WIRELESS mouse must be fully charged before its first use. Connect the HARPOON RGB WIRELESS mouse to an available USB 2.0 or 3.0 port on your PC with the USB charging / data cable. The multi-purpose LED indicator on the mouse will begin pulsing green to denote battery charging and will turn solid when charging is complete. The battery has no “memory effect” and should not be completely discharged before recharging to ensure it will last for hundreds of charge / discharge cycles.
GETTING TO KNOW YOUR MOUSE
- A — LEFT CLICK BUTTON
- B — RIGHT CLICK BUTTON
- C — MIDDLE CLICK BUTTON
- D — DPI CYCLE BUTTON
- E — FORWARD BUTTON
- F — BACKWARD BUTTON
- G — MULTI-PURPOSE LED INDICATOR
- H — OPTICAL GAMING SENSOR
- I — PTFE GLIDE PADS
- J — POWER / WIRELESS MODE SWITCH
- K — USB WIRELESS RECEIVER
SETTING UP YOUR MOUSE
- Turn on your computer and connect the USB wireless receiver to an available USB port.
- Toggle power / wireless mode switch to “2.4GHz” position to turn on your mouse.
- The multi-purpose LED indicator on your mouse will turn solid white when automatically connected.
- Download the iCUE software from www.corsair.com/downloads.
- Run the installer program and follow instructions for installatioL — USB CHARGING /
ULTI-PURPOSE LED INDICATOR
Various aspects of mouse operation are communicated through the multi-purpose LED indicator located behind
on top cover of the mouse.
