Corsair iCUE LS100 Lighting Strip User Manual


Corsair iCUE LS100 Lighting Strip


PACKAGE CONTENTSCorsair-iCUE-LS100-Lighting-Stripfig-1


  • Supported by CORSAIR iCUE software. Additional RGB LED strips sold separately.
  • RGB LED Controller required.


  1. Clean and wipe the surface of the mounting area with a soft and clean cloth.
  2. Peel the adhesive tape on the back of the metal plates and position them correctly and adhere them on the desired location. Attach the controller to the back of the monitor or place it securely on the installed area with the mounting plates.Corsair-iCUE-LS100-Lighting-Stripfig-3
  3. Connect one end of the power cord to the power supply and the other end to an electrical outlet, and then connect the round end of the power supply cord to the controller. Plug the micro USB cable into the controller then plug the USB A to the available USB port in the system.Corsair-iCUE-LS100-Lighting-Stripfig-5
  4. For single and dual monitors setup, follow the suggested configuration and the lighting strips setup in iCUE accordingly. On the back of the monitor, mount the vertical 250mm short strip on the right side first (1) and connect to the horizontal 450mm long strip on the top side (2), and continue with the 250mm short strip on the left side (3), finish on the bottom side with the 450mm long strip (4).Corsair-iCUE-LS100-Lighting-Stripfig-4 For dual monitors, optional 450mm long strips can be purchased separately to expand the connection to the 2nd monitor.Corsair-iCUE-LS100-Lighting-Stripfig-6
  5. Secure the extension cables with the cable management clips.Corsair-iCUE-LS100-Lighting-Stripfig-7
  6. Turn on your PC.
  7. Download CORSAIR iCUE software at Internet connection is required to download the latest. Run the installer program and follow instructions for installation.
  8. The Brightness button on the controller can be pressed to turn the brightness level to zero.


After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies:

  • Electrical and electronic devices may not be disposed of with domestic waste.
  • Consumers are obligated by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose of point of sale. Details to this are defined by the national law of the respective country.

This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

CORSAIR MEMORY, Inc. declares that this equipment is compliance with Directive 2014/30/EU and 2011/65/EU. A copy of the original declaration of conformity can be obtained at “”.


This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. his device may not cause harmful interference, and
  2. this device must accept any interference received,including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Operating Temperature: 0°C ~ + 40°C This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment.

© 2020 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. 49-002296 AB

Download Link

Leave a Reply