Cuisinart CPB-300 Compact Blending Manual

Cuisinart CPB-300 Compact Blending

Important Safeguards

When using an electrical appliance, basic safety precautions should always be followed, including the following:

1. READ ALL INSTRUCTIONS BEFORE USING.
2. To protect against the risk of electrical shock, do not put motor base of blender in water or other liquids.
3. This appliance should not be used by or near children or individuals  with certain disabilities.
4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning or removing contents from blender jar or cup. Never put hands into the blender jar or cups, or handle the blades with appliance plugged in.
5. Avoid contact with moving parts.
6.  Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to nearest Cuisinart service facility for examination, repair, and/or mechanical or electrical adjustment.
7. The use of attachments, including canning or ordinary jars, not recommended or sold by Cuisinart may cause fire, electric shock, or risk of injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of counter or table or touch hot surfaces.
10. Keep hands and utensils out of jar while blending, to reduce the risk of severe injury to persons or damage to blender itself. A rubber or plastic spatula may be used but must be used only when the blender is turned off.
11. When blender is in Standby mode, and the LED lights are flashing or glowing, do not touch cutting assembly, interfere with blade movement, or remove blender jar cover. Accidentally touching a speed button may activate the blender.
12. BLADES ARE SHARP. HANDLE CAREFULLY.
13. To reduce the risk of injury, never place cutting assembly on base unless the blender jar, chopper cup or travel cups are properly attached.
14. Always operate blender jar with the cover in place.
15. Never leave your blender unattended while running.
16. Twist on vessel firmly. Injury can result if moving blades accidentally become exposed.
17. Do not use an extension cord with this unit. Doing so may result in fire, electric shock, or personal injury.
18. Wash the blender jar, chopping cup, travel cups, cutting assemblies and lids/cover before first use.
19. Keep hands and utensils away from cutting blade while chopping food to reduce the risk of severe injury to persons or damage to the food chopper. A scraper may be used but only when the food chopper is not running.
20. Do not blend hot liquids in the travel cups or chopping cup.
21. Be certain cover is securely locked in place before operating appliance.
22. Do not attempt to bypass the interlock system that powers the unit on.
23. WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK OR
    FIRE, DO NOT REMOVE THE BASE PANEL. NO USERSERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE DONE ONLY BY AUTHORIZED PERSONNEL.
24. WARNING: FLASHING LIGHT INDICATES BLENDER IS READY TO OPERATE. DO NOT TOUCH BLADES.
25. The jar chopping cup and travel mug are not recommended for microwave use.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

NOTICE
This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric shock, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. Maximum rating of 350 watts is based on the jar attachment that draws the greatest power. Other recommended attachments may draw significantly less power. This appliance comes with a thermal resettable fuse feature to prevent damage to the motor in the case of extreme overload. Should the unit shut  off unexpectedly, unplug it and let it cool for at least 15 minutes beforecontinuing (see “Operating and Safety Tips,” on page 5).

UNPACKING INSTRUCTIONS

1. Place the gift box containing your Cuisinart® SmartPower® Portable Compact Blender on a flat, sturdy surface before unpacking.
2. Remove instruction booklet and other printed materials from top of packaging material. Next remove top pulp tray.
3. Carefully lift blender base from box and set aside.
4. Remove blender jar, chopping cup and travel cups and set aside.

Before using for the first time: Wash all parts according to the Cleaning and Maintenance section on page 6 of this booklet to remove any dust or residue. To assemble the blender, follow the Assembly instructions on page 4 of this instruction booklet. Replace all packaging materials in the box and save the box for repackaging.

FEATURES AND BENEFITS

1. 32-oz. BPA-free easy-grip blending jar
   with cover and pour lid has a unique, sturdy design for all your blending needs. Lid fits on top with a 1-oz. measured pour lid.
2. 8-oz BPA-free chopping cup
   with lid handles a variety of food preparation tasks including chopping, grinding and whipping.
3. Four 16-oz BPA-free travel cups with lids
   allow you to blend for one. Make your favorite drinks: smoothies, protein, health and diet drinks and more!
4. Two high-quality blade assemblies
   are strong enough for all blending, chopping and grinding tasks. They are self-aligning so that the cups easily fit on the base. Blade assemblies are interchangeable for desired tasks.
5. Heavy-duty motor base with stainless steel accent
   is sturdy and stable, housing a compact 350-watt motor with a safety interlock feature.
6. 3-function touchpad control with LED indicator lights
   is easy to use, read and clean. The blue LED lights clearly indicate what speed you are using.
7. Slip-proof feet (not shown)
   prevent movement during use and prevent damaging marks on countertops or tables.
8. Cord storage (not shown)
   keeps countertops safe and neat by conveniently storing excess cord.

Assembly

After washing all parts, please see below for assembly. Place base on flat surface and plug in.

Blender JAR OPERATION

1. With the base unit on the tabletop and unit plugged in, place the blender jar assembled with the blade assembly onto the base and secure into place. The unit automatically is activated and in Standby mode with the red POWER LED light illuminated and flashing.
   Note: Blade assemblies are interchangeable based on recipes and desired end results.
2. Add food ingredients. Replace the cover. You may add more ingredients by lifting the measured pour lid and dropping ingredients through the fill area. Replace the pour lid after adding ingredients. Do no put hands into jar with blender in Standby mode.
   Note: To remove blender jar cover, lift edge of cover upward. Do not use measured pour lid to remove cover.
3. For continuous blending, press the desired speed. The blue LED light will illuminate, indicating that the blender is on and running. It is possible to switch between High and Low speeds by simply pushing the desired speed button.
4. To pause the blending process, press the activated speed button. The blending process will stop. The red Standby indicator light will continue to flash to let you know that the blender is still activated. To reengage a function, choose the desired speed.
5. To pulse, push the Pulse button. The blue Pulse indicator light will flash. Next, push and release the desired speed button. Repeat as needed. While pulsing, active indicator lights will be lit. The Pulse function can be used to break apart larger pieces of food. The Pulse function is also effective for starting the blending process when you do not want continuous power or processing items that do not require an extended amount of blending.
6. When you have finished blending, press the activated speed to put unit in Standby mode. Then remove the blender jar from the base. Pour out ingredients. NEVER TOUCH THE BLADE ITSELF. Unplug the unit.

TRAVEL CUP OPERATION

1. Put food ingredients into the travel cup, and then attach blade assembly.
   Note: Blade assemblies are interchangeable based on recipes and desired end results.
2. With the base unit on the tabletop and the unit plugged in, place the assembled travel cup onto the base and secure into place. The unit automatically is activated and in Standby mode with the red POWER LED illuminated and flashing.
3. For continuous blending, press the desired speed. The blue LED light will illuminate, indicating that the blender is on and running. It is possible to switch between High and Low speeds by simply pushing the desired speed button.
4. To pause the blending process, press the activated speed button. The blending process will stop. The red Standby indicator light will continue to flash to let you know that the blender is still activated. To reengage the unit, choose the desired speed.
5. When you have finished blending, press activated speed to put in Standby mode. Remove the travel cup from the base. Unplug the unit.
6. Turn cup right side up, turn blade assembly counterclockwise to remove. Attach travel cup lid by twisting clockwise.

CHOPPING CUP OPERATION

1. Put food ingredients into chopper cup filling it to a maximum of one-quarter of its capacity, then attach blade assembly.
   Note: Blade assemblies are interchangeable based on recipes and desired end results.
2. With the base unit on the tabletop and the unit plugged in, place the assembled chopper cup onto the base and secure into place. The unit automatically is activated and in Standby mode with the red POWER LED illuminated and flashing.
3. To continuously chop, press High or Low speed.
4. To pulse, press Pulse and then desired High or Low speed.
5. When you have finished chopping, press activated speed to put in Standby mode. Remove the chopping cup from the base. Carefully remove food with a spatula. NEVER TOUCH THE BLADE ITSELF. Unplug the unit.

OPERATING AND SAFETY TIPS

• Make sure the electrical outlet is rated at the same voltage as that stated on the bottom of the blender motor base.
• Always use the blender on a clean, sturdy and dry surface.
• Always operate the blender jar with the cover on. Place cover on firmly. Keep the blender jar cover on the blender jar while blending.
• Don’t put hands inside the blender jar when blender is plugged in.
• Don’t remove blender jar or cups while unit is running.
• Don’t place blade assembly onto motor base without the jar or cup attached.
• Make sure blade assembly is tightly attached to jar or cups.
• Always remove blade assembly before cleaning.
• Don’t twist blade assembly from blender jar or cups when removing from motor base. Simply lift jar or cups from motor base.
• Use a rubber or plastic spatula as needed, only when the blender is turned off. Do not use any utensil inside the blender while motor is on.
• Never use metal utensils, as damage may occur to the jar, cup or cutting assembly.
• Don’t store food or liquids in your blender jar.
• Don’t overload blender jar or cups. If the motor stalls, turn the blender off immediately, unplug the unit and let it cool for at least 15 minutes. Then, remove a portion of the food and continue.
• Don’t blend hot liquids or carbonated beverages in chopper and travel cups.
• Don’t use any container or accessories not recommended by Cuisinart. Doing so may result in injury.
• To remove jar or cup lift straight up. Do not twist to remove.
• The jar, chopping cup and travel cups are not recommended for microwave use.

CLEANING AND MAINTENANCE

Always unplug your Cuisinart® SmartPower® Portable Compact Blender from the electrical outlet before cleaning. The base and parts are made of corrosion-resistant materials that are easy to clean. Before first use and after every use, clean each part thoroughly. Periodically check all parts before reassembly. DO NOT USE if any part is damaged, or if the jar or cups are chipped or cracked. To remove blade assemblies, twist off by turning counterclockwise.

NEVER TOUCH THE BLADE ITSELF.

CAUTION: Handle the blade assemblies carefully. They are SHARP and may cause injury. DO NOT attempt to remove blades from cutting assembly. Wash all parts in warm, soapy water; rinse and dry thoroughly. All parts are top rack dishwasher safe.

Tip: You may wish to clean your blending and chopper cutting assemblies as follows: squirt a small amount of dishwashing liquid into blender jar or cups and fill halfway with warm water. Attach blade assembly. Run on Low for 15 seconds. Repeat, using clean tap water. Carefully disassemble parts and empty blender jar or cups. Rinse and dry all parts thoroughly. Finally, wipe the motor base clean with a damp cloth to remove any residue, and dry thoroughly. Never submerge the motor base in water or other liquids, or place in a dishwasher. Any other servicing should be performed by an authorized service representative.

Troubleshooting

WARRANTY LIMITED

THREE-YEAR WARRANTY

This warranty is available to consumers only. You are a consumer if you own a Cuisinart® SmartPower® Portable Compact Blender that was purchased at retail for personal, family, or household use. Except as otherwise required under applicable state law, this warranty is not available to retailers or other commercial purchasers or owners. We warrant that your Cuisinart® SmartPower® Portable Compact Blender will be free of defects in material or workmanship under normal home use for three years from the date of original purchase.

We recommend that you visit our website, www.cuisinart.com for a fast, efficient way to complete your product registration. However, product registration does not eliminate the need for the consumer to maintain the original proof of purchase in order to obtain the warranty benefits. In the event that you do not have proof of purchase date, the purchase date for purposes of this warranty will be the date of manufacture.  If your blender should prove to be defective within the warranty period, we will repair it or, if we think it necessary, replace it.

To obtain warranty service, please call our Consumer Service Center toll-free at 1-800-726-0190 or write to: Cuisinart, 7811 North Glen Harbor Blvd., Glendale, AZ 85307. To facilitate the speed and accuracy of your return, please enclose $10.00 for shipping and handling of the product. Be sure to include a return address, daytime phone number, description of the product defect, product serial number (stamped on bottom of product base), and any other information pertinent to the product’s return. Please pay by check or money order (California residents need only supply proof of purchase and should call 1-800-726-0190 for shipping instructions).

NOTE: For added protection and secure handling of any Cuisinart product that is being returned, we recommend you use a traceable, insured delivery service. Cuisinart cannot be held responsible for in-transit damage or for packages that are not delivered to us. Lost and/or damaged products are not covered under warranty.

Your Cuisinart® SmartPower® Portable Compact Blender has been manufactured to strict specifications and has been designed for use with the Cuisinart® SmartPower® Portable Compact Blender accessories and replacement parts. These warranties expressly exclude any defects or damages caused by accessories, replacement parts, or repair service other than those that have been authorized by Cuisinart. These warranties do not cover any damage caused by accident, misuse, shipment, or other than ordinary household use. These warranties exclude all incidental or consequential damages. Some states do not allow the exclusion of or limitation of incidental or consequential damages, so the foregoing limitation may not apply to you.

CALIFORNIA RESIDENTS ONLY:
California law provides that for In-Warranty Service, California residents have the option of returning a nonconforming product (A) to the store where it was purchased or (B) to another retail store which sells Cuisinart products of the same type. The retail store shall then, at its discretion, either repair the product, refer the consumer to an independent repair facility, replace the product, or refund the purchase price less the amount directly attributable to the consumer’s prior usage of the product. If the above two options do not result in the appropriate relief to the consumer, the consumer may then take the product to an independent repair facility if service or repair can be economically accomplished. Cuisinart and not the consumer will be responsible for the reasonable cost of such service, repair, replacement, or refund for nonconforming products under warranty. California residents may also, according to their preference, return nonconforming products directly to Cuisinart for repair, or if necessary, replacement, by calling our Consumer Service Center toll-free at 1-800-726-0190.
Cuisinart will be responsible for the cost of the repair, replacement, and shipping and handling for such products under warranty.

©2011 Cuisinart 150 Milford Road East Windsor, NJ 08520 Printed in China

Download link