Cobra CPJS1000A Jump Starter 1000A User Manual
Thank you for purchasing the Cobra Jump Starter 1000A Jump start your vehicle’s dead battery and keep your portable devices powered and charged with this heavy-duty Lithium-lon jump starter and power bank. Fast-charge USB ports allow you to charge multiple portable devices at once, while two starting options allow you to start your vehicle either from a direct-to-bat- tery connection or through the in-car connection using the 12V outlet inside your vehicle. Keep this in your vehicle for when you or others will need it! Count on Cobra for Power When You Need It.
Jump Starter 1000A Features
- A. LED Display
- B. Power/Flashlight Button
- C. Jump Start Connector
- D. LED Flashlight
- E. USB-C Fast Charge Input/Output
- F. (2) USB-A Fast Charge Outputs
- G. 12V Jump Start Connector
- H. Jump Start Cable
- I. USB-C to USB-A Cable
- J.12V . lumen Start Cahle
Jump Starting Your Vehicle: Direct-to-Battery
- Connect the jumper cable clamps to the battery terminals (First, Red to Positive. then Black to Negative)
- Connect the jumper cables to the Jump Starter 1000A.
- Wait for the Green LED light to appear on the Jump Start cable and then start your vehicle
- Disconnect the jumper cable from the Jump Starter 1000A and then from the batter.
Jump Starting Your Vehicle: In-Car
- Turn off all vehicle accessories. Connect the jumper cable to the Jump Starter 1000A.
- Depending on your vehicle, push the START button to the Accessory mode or turn the ignition switch to the Accessory position.
- Connect the jumper cable plug to the vehicle’s 12V accessory port NOTE: The 12V plug is used for in-car jump starting only. For instructions on recharging the Jump Starter 1000A, please see “Re-Charging Your Jump Carer 000д*
- Wait for “Output Ready and 5 solid charging bars on your Jump Starter’s LED screen.
- Disconnect the Jump Start cable from the 12V accessory port and from the Jump Starter 1000A. Leave the engine running for at least twenty minutes to allow the vehicle’s battery to recharge.
NOTE:
The in-car battery charging from the Jump Starter 1000A will take up to 15 minutes. If your vehicle does not start with the in-car method, try the direct-to-battery method.
Re-Charging Your Jump Starter 1000A
Re-Charging Your Jump Starter 1000A
In-Car Jump Starting FAQ
How do I know if my battery is charging?
When the 12 jumper cables are plugged into the Jump Starter 1000A and the vehicle’s 12V accessory port, the LCD screen will show a flashing 5-bar graph and the word ‘Output’. As your battery charges the flashing bars will begin to turn solid until the vehicle is ready to start, at which point a ‘Ready message will appear on the screen and you are ready to start your vehicle.
How long will it take to charge?
In-car jump-starting will take longer than jump-starting with a direct-to-battery connection, up to 15 minutes in total. If your vehicle does not start with the in-car method, try to jump-start with the direct-to-battery method.
What if I don’t see the charging bars?
If the Jump Starter 1000A does not have enough charge to jump start from within the car, the current battery percentage will flash and a caution image will appear. In that case, you will need to jump-start your vehicle by using the direct-to-battery method.
