Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-featured-img

Pheanoo D5 Sound Bar Subwoofer User Manual

Pheanoo-logo

Pheanoo D5 Sound Bar Subwoofer User Manual

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-prduct-img

Important Safety Instruction

Thank you for purchasing the D5 Soundbar. Please read this user manual carefully and keep it for future reference.

Notice:
This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

  1. To prevent possible hearing damage, do not listen at high volume levels for long time periods or a sudden high volume level.
  2. Never use the device unsupervised! Switch off the device whenever you are not using it, even if not using it only for a short while.
  3. The appliance is not intended to be operated by means of an external timer or a separate remote control system.
  4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
  5. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply. Important Safety Instruction
  6. The unit should not be impeded by covering the ventilation opening with items such as newspapers, tablecloths, curtains, etc. Make sure that there is at least 20 cm of space above and at least 5 cm of space on each side of the unit.
Important Safety Instructions
  1. Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
  2. Do not use this apparatus near water.
  3. Clean only with a dry cloth.
  4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  5. Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat.
  6. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, or at the point where they exit from the apparatus.
  7. Only use attachments/accessories specified by the manufacturer.
  8. Unplug this apparatus during lightning storms or when unused for long periods of time.
  9. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, for example, when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  10. The AC plug is used to disconnect the device, the disconnected device should remain readily operable. In order to disconnect the apparatus from the AC power completely, the AC plug must be removed from the AC outlet completely.

Preparation for Use

Unpacking and Set Up

  • Remove the Soundbar from the carton and remove all packing material from the Soundbar. Save the packing material, if possible, in case the Soundbar ever needs to be serviced or transported. The original carton and packing material are the only safe way to pack your Soundbar to protect it from damage in transit.
  • Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet.
  • Place your Soundbar on a level surface such as a table, desk, or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration.
  • Unwind the Line cord connecting the AC adapter and extend it to its full length.

Protect Your Furniture
This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil-based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture.

To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber ‘feet’ before you place the unit.

Important Notes Soundbar assembly details
  • This sound bar was specially developed for LED/LCD/Plasma TVs: It should not be used in combination with CRTTV’s (Cathode Ray Tube TVs) in order to avoid image interference.
  • The safety and operating instruction manual should be retained for future reference.
  • The apparatus should not be exposed to dripping, splashing, or placed in a humid atmosphere such as a bathroom.
  • Do not install the product in the following areas:
  • Places exposed to direct sunlight or close to radiators.
  • On top of other stereo equipment that radiates too much heat -Blocking ventilation or in a dusty area.
  • Areas where there is constant vibration.
  • Humid or moist places.
  • Do not place near candles or other flames.
  • Operate the product only as instructed in this manual.
  • Before turning on the power for the first time, make sure the sound bar is plugged into the power outlet.
  • For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.
  • Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

Specifications

ModelD5
TechnologyBT/AUX/HDMI(ARC)/OPTICAL
Drivers5090*2 SB + 5.25inch SW
Audio Output Power200W
Frequency Response55Hz-20KHz
Signal-to-Noise Ratio66dB
lmpedance 

 

Power lnputAC 110V-240V~50Hz/60Hz
R.M.S80W
bluetooth VersionVersion: 5.0 Range:up to 10m
 

Dimensions

Soundbar: 62H*73D*750 Lmm Subwoofer: H360*W135*D210 mm
Bluetooth Frequency2402MHz – 2480MHz

ModelD5
TechnologyBT/AUX/HDMI(ARC)/OPTICAL
Drivers5090*2 SB + 5.25inch SW
Audio Output Power200W
Frequency Response55Hz-20KHz
Signal-to-Noise Ratio66dB
lmpedance 

 

Power lnputAC 110V-240V~50Hz/60Hz
R.M.S80W
bluetooth VersionVersion: 5.0 Range: up to 10m
 

Dimensions

Soundbar: 62H*73D*750 Lmm Subwoofer: H360*W135*D210 mm
Bluetooth Frequency2402MHz – 2480MHz

Soundbar accessories

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-fig-5

Overview of the Sound Bar main unit 

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-fig-6

Remote Control 

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-fig-7

Important Notes Soundbar assembly details 

  • Step 1: Plug the audio connector into the audio input port on another main unit
  • Step 2: Align the arrows on the two stickers
  • Step 3: Twist clockwise about 20 degrees until locks securely

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-fig-8

Follow the below steps to mount the sound bar on the wall 

  1. Paste 2 pieces of EVA foam (with holes) on the two wall brackets aligning at the hole position of the wall brackets.
  2. Remove 4 screws from the rear housing of the sound bar, then insert the 4 screws over the wall bracket screw holes aligning (on the side of EVA foam pasted), and then fasten the screws again.
  3. According to the two hanging wall positions on the rear of the soundbar, calibrate and mark the two hanging brackets’ hole positions on the wall. Then drill two holes in the wall, firstly insert two expansion plastic screws on the wall, then fasten the hanging screws into expansion screw holes. backing paper EVA foam (with holes)
  4. Then Paste the 2 pieces of EVA foam (without holes) on the two wall brackets downward. Then place the hollow cross in the center of the bracket against the screws on the wall and hang the sound bar on the wall finally

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-fig-9

Place on a flat Surface 

Place the soundbar horizontally on a flat surface such as a TV unit or shelves and align it centrally with the TV screen. Allow some space between the speaker and the wall. Don’t place it inside a cabinet or a walled shelf. Follow this guidance for the best sound output and good airflow around the soundbar.

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-fig-10

Mount on the wall

WARNING:
If you don’t feel confident to correctly and securely wall-mount the sound bar, Seek the assistance of an experienced person of professional. Install the speaker on a vertical, fast, reinforced area of the wall. For plaster walls, it is recommended to screw into wall studs for greater security. For optimum performance, allow at least 25mm/1’distance between the sound bar and the TV.

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-fig-1

Setting the Soundbar 

  1. Plug the power cord in and the LED will light up.
  2. Press the BLUETOOTH/OPTICAL/AUX/HDMI(ARC) button on the remote control to switch the input mode The indicator can change into 5 different colors, representing different input modes:
    Blue: in Bluetooth mode Green: in AUX mode
    Pink: in USB mode Cyan: in HDMI(ARC) mode
  3. When the indicator light is on, press the INDICATOR button to turn it off; when the indicator light is off, press any button on the remote control to turn on it.

Powering On/Off 

  1. Plug the power cord of the soundbar into a wall outlet, it will automatically enter standby mode;
  2. Press the STANDBY button on the soundbar or POWER button on the remote control to turn the soundbar on. Make your selection of the desired input modes by pressing the BLUETOOTH /OPTICAL/AUX/HDMI(ARC) button on the remote control or the standby button on the soundbar`.
  3. To turn it off, press and hold the STANDBY button or POWER button on the remote control for about 2 seconds, the soundbar will enter standby mode, and then unplug it from the wall outlet.

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-fig-2

Playing Audio via BT Connection
  1. Use either the buttons on the SoundBar or the “BLUETOOTH” button on the remote to activate BT mode. A Blue LED indicator will indicate that BT mode has been selected.
  2. Activate the pairing function on your phone or other compatible device and select“ D5 ”
  3. When successfully paired, you will hear a tone and the LED will stay on
  4. The remote control includes BT mode playback controls.

Notes:

  • If your Pairing device is Switched off or Manual disconnected, the soundbar will automatically enter pairing mode
  • If the connected device is switched off or manually disconnected, the soundbar will automatically enter pairing successfully connected device will be re-established once you re-enter the wireless range(10 meters). to connect to other devices, repeat the above pairing steps
  •  There is no automatic shutdown in pairing mode. The sound bar will remain in pairing mode even if no device is paired, so switch off if not in use.

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-fig-3

Audio input(Aux)Connection 

  1. Use either the buttons on the SoundBar or the “AUX” button on the remote to activate AUX mode. A green LED indicator will indicate that AUX mode has been selected.
  2. Playback functions (play/pause, tracks, pair) cannot be adjusted through the SoundBar remote when in AUX mode. Other playback functions can be controlled from the buttons on the SoundBar

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-fig-4

Optical Mode

Use this operating mode to play music from the optical digital input for example from a TV on your soundbar. The TV must have an optical digital output. Use the optical cable supplied to make the connection. Proceed as follows:

  • Connect the optical cable to the optical digital output of your TV.
  • Then connect the optical cable to the optical digital input of your soundbar.
  • Start playing on the TV.
  • Press the OPTICAL button on the remote control to select OPTICAL mode
  • You can use the volume buttons to adjust the volume to your requirements.
  • If you wish, you can change the audio settings using the relevant buttons on the remote control.

Note:
Sometimes users may hear an echo sound when connecting the soundbar to the TV via optical cable. To eliminate the echo effect, your TV speakers should be disabled. Refer to your TV’s audio menu options to make the necessary changes to the speaker settings.

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-fig-4

HDMI (ARC) Mode 

  1. The soundbar supports HDMI (ARC) with an audio return channel (ARC). You can hear the TV audio through your soundbar by using a single HDMI cable. But on condition that your TV is ARC compliant.
  2. Using a high-speed HDMI cable, connect the HDMI (ARC) connector on the soundbar to the HDMI (ARC) connector on the TV. The HDMI (ARC) connector on the TV might be labeled differently. For details, see the user manual of your TV.
  3. Press the “HDMI(ARC)” button on the remote control or the “STANDBY” button on the soundbar to select HDMI (ARC) mode. Different TVs might have different settings, please refer to your TV USER MANUAL.
  4. Use the volume buttons to adjust the volume to your requirements.
  5. You can also change the audio settings by using the relevant buttons on the remote control.

TROUBLESHOOTING

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-fig-12

Pheanoo-D5-Sound-Bar-Subwoofer-User-Manual-fig-11

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna,
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help
Note:

The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements. To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s). IC Warning This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

The device has been evaluated to meet general RF exposure requirement. To maintain compliance with RSS-102 — Radio Frequency (RF) Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. le dispositif de a été évalué à répondre général rf exposition exigence.pour maintenir la conformité avec les directives d ‘exposition du RSS-102-Radio Fréquence (RF). ce matériel doit être installé et exploité à une distance minimale de 20 cm entre le radiateur et votre corps.

REFERENCE LINK

https://pheanoo.com/product.html?product_id=10004

Leave a Reply