SCOSCHE Dash Mount For Mobile Devices Manual
INSTRUCTIONS
READ INSTRUCTIONS COMPLETELY BEFORE INSTALLING THIS MOUNT KIT.
WARNING: Do not use the magnetic mount with any hard-drive based devices such as: iPod classic, iPod video and Zune MP3 players. Use caution whenever removing or handling plastic parts of any vehicle. Unnecessary force or pressure can cause pieces to crack or break. Please use a plastic card to remove the metal plates. Remove adhesive residue with a non-abrasive cleaner.
PARTS INCLUDED
- (1) Low-profile magnetic mount
- (1) Small metal plate
- (1) Large metal plate
- (1) Cleaning wipe
MOUNTING THE METAL PLATE
Note: This item is not to be used with any Qi Wireless Charging products as the metal plates can cause extreme heat that can cause burns and/or damage the device.
- Option 1 (small or large plate): Attach adhesive side of metal plate directly to back of device.
- Option 2 (small or large plate): Attach adhesive side of metal plate directly to back of case.
- Option 3 (large plate only): Attach adhesive side of metal plate to interior of case, between device and inside of case. Plate will
adhere to magnetic mount through rear panel of case.
note: If choosing not to attach the metal plate to the device or case, please leave the adhesive backing in place. Position the plate between the device and interior of case with the metal surface facing the case. - Option 4 (small plate only): Similar to Option 3, attach the adhesive side of the small plate to the interior of the device’s rear battery compartment cover (if space and design permit). Plate will adhere to magnetic mount through the rear battery cover.
For more information please visit www.scosche.com/magmount.
PLACE LOW-PROFILE MOUNT
Caution: This magnetic mount is not a toy. The small magnets are harmful if swallowed. Keep away from children.
PEEL OFF PROTECTIVE BACKING AND ATTACH THE MOUNT TO THE DESIRED SURFACE
Note: Clean the surface thoroughly using the included cleaning wipe. For best adhesion, firmly hold the mount against the desired surface for up to one minute.
ATTACH DEVICE TO MAGNETIC MOUNT
REMOVING ADHESIVE mounting PARTS (dash mount & metal plate )
Use a thin plastic card to carefully lift the magnetic mount or metal plate from the mounting surface. Slowly lift up and remove the mount or metal plate.
LIMITED WARRANTY
Scosche Industries Inc. warrants this product to be free from defects in material and workmanship for a period of 1 year from purchase. This Scosche product is sold with the understanding that the purchaser has independently determined the suitability of this product.
The original dated sales slip or proof of purchase will establish warranty eligibility. If the product should prove defective within the warranty period, return the product with proof of purchase to Scosche Industries Inc. Scosche, at its option, will replace or repair the product free of charge and return the product postage paid.
In no event shall Scosche Industries, Inc. be responsible for claims beyond the replacement value of the defective product, or in any way be liable or responsible for consequential or incidental damages. No empress warranties and no implied warranties, whether for fitness or any particular use or otherwise, except as set forth above (which is made expressly in lieu of all other warranties) shall apply to products sold by Scosche.
Scosche Industries cannot be held responsible for discrepancies/inconsistencies that may occur due to automotive manufacturing changes or option.
FAQS
- Q: What is the SCOSCHE Dash Mount for Mobile Devices?
- A: The SCOSCHE Dash Mount is a device holder designed to securely mount your mobile devices, such as smartphones or tablets, on the dashboard of your car.
- Q: How does the SCOSCHE Dash Mount work?
- A: The SCOSCHE Dash Mount uses a combination of adhesive and suction to secure your mobile device to the dashboard. It typically has an adjustable arm or holder that can be positioned at various angles for optimal viewing.
- Q: Is the SCOSCHE Dash Mount compatible with all mobile devices?
- A: The SCOSCHE Dash Mount is designed to be compatible with a wide range of mobile devices, including smartphones and tablets. However, it’s always a good idea to check the product specifications or consult the manufacturer to ensure compatibility with your specific device.
- Q: Will the SCOSCHE Dash Mount damage my dashboard or mobile device?
- A: The SCOSCHE Dash Mount is designed to be non-damaging to both your dashboard and mobile device. The adhesive used is typically strong enough to keep the mount in place while driving but can also be easily removed without leaving residue or damaging the dashboard. However, it’s important to follow the installation instructions carefully to minimize any potential risks.
- Q: Can I use the SCOSCHE Dash Mount on any type of dashboard material?
- A: The SCOSCHE Dash Mount is generally compatible with most types of dashboards, including plastic, vinyl, leather, and textured surfaces. However, it may not adhere well to certain silicone or rubberized surfaces. It’s recommended to clean the dashboard surface before applying the adhesive for optimal performance.
