MOZOTER DBK02 Bluetooth 5.2 Wireless Earbuds User Manual

MOZOTER DBK02 Bluetooth 5.2 Wireless Earbuds User Manual

Important Safety Instructions

1.  Do not use corrosive liquid to clean this product.
2. If it comes into contact with chemicals, please rub it with a damp cloth wet with clean water.
3.  Do not use this product under extreme circumstances for temperature below -10 degree Celsius or above 60 degree Celsius .
4. To avoid explosion, please do not throw this product into fire.
5.  To avoid scratches, please do not touch the earbuds with sharp objects.
6. Do not insert objects into the earbuds, otherwise it would cause damage to the internal components.
7. Do not disassemble the earbud.
8.  Please keep regular charge to earbuds, don’t leave them become empty battery status to keep their lifetime.
9.  Please do not charge products with power adapter over 2A current. Excessive current may cause the damage to battery.

Product overview

1. Choose the ear cap that suits you.
2. Make sure that the ear caps face down and put the earbuds into the ear in the angle shown as the picture on the right.
3. After putting on the earbuds, gently rotating the earbuds to a comfortable and secure position shown as picture 3 on the right.
4. Do not wear the earbuds like the way shown as the picture on the right.

First Time Using

1. Tear off the insulating film.
2. Put the earbuds into the charging case and close the lid to charge(the earbuds are in charging state).
3. Open the cover of the charging case and ,they will turn on and pair automatically and will be prepared for pairing to the phone.
4. The indicator of one earbud will go off and another will flash red and blue light alternately.(In pairing mode)
5. Turn on the Bluetooth function on your phone and search for【DBK02】and connect it.

Button control

ON

• The earbuds will automatically turn on after opening the top lid of the charging case.
• Press and hold the power switch for 5s then leave hold, the earbuds will turn on.

OFF

• Put the earbuds into the charging case and close the lid, they will automatically shut down.
• While in the non-working state, press and hold the power switch for 5s, the two earbuds will be turned off at the same time.
• Automatically shut down after not connected for more than 5 minutes.

Siri and other Voice Assistant

• IOS and part of the Android users can triple click the left or right power switch to turn on the voice assistant.

• The voice assistant will be automatically activated depends in different OS in mobile system.

Restore Factory Setting

1. When the earbud is on with mobile phone unconnected, click the left and right power switch simultaneously four times quickly. The red and blue lights will be on for 2 seconds and then it will clear its memory and the earbuds will shut down.
2. Please delete all paired records on the phone and search again for “DBK02″on the bluetooth of mobile phone
   and reconnect.

Earbuds Indicator

Charging Case Indicator

Specifications

• Version:  V5.2+EDR
• Support: HFP,HSP,A2DP,AVRCP
• Transmission distance: 10m
• Frequency range: 2.402 GHz~2.480 GHz
• Speaker: Φ 8.2mm*2
• Impedance: 16 Ω
• Standby time: 60 hours
• Talk time: 4 hours
• Playing time: 4 hours
• Earbud battery capacity: 40mAh
• Fully charged time: 1 hour
• Charging case battery capacity: 500mAh
• Charging time of charging case About: 1.5 hours
• Weight (single earbud): 4.0 g

Steps of Charging for Earbuds

Put the earbud in the charging case, and the lid must be closed to charge it, and they will automatically turn off and
disconnect when the charging case lid is closed.

Charging case:
Please use a charger with an output voltage of DC5V/1A to charge the charging case. You can also use a computer
USB or other USB interface charger to charge.