Kenwood DDX155 Touch Screen DVD Receiver User Manual

Kenwood DDX155 Touch Screen DVD Receiver User Manual

Before use

WARNINGS:

(To prevent accidents and damage)

• DO NOT install any unit or wire any cable in a location where;
• it may obstruct the steering wheel and gearshift lever operations.
• it may obstruct the operation of safety devices such as air bags.
• it may obstruct visibility.
• DO NOT operate the unit while driving. If you need to operate the unit while driving, be sure to look around carefully.
• The driver must not watch the monitor while driving.

Cautions on the monitor:

• The monitor built in this unit has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not considered defective.
• Do not expose the monitor to direct sunlight.
• Do not operate the touch panel using a ball-point pen or similar tool with the sharp tip.
• Press the buttons on the touch panel with your finger directly (if you are wearing a glove, take it off).
• When the temperature is very cold or very hot…
• Chemical changes occur inside, causing malfunction.
• Pictures may not appear clearly or may move slowly. Pictures may not be synchronized with the sound or picture quality may decline in such environments.

For safety…

• Do not raise the volume level too much, as this will make driving dangerous by blocking outside sounds, and may cause hearing loss.
• Stop the car before performing any complicated operations.

Temperature inside the car…

• If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.
• How to reset your unit

• If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed (except the registered Bluetooth devices).

How to read this manual:

• This manual mainly explains operations using the buttons on the monitor panel and touch panel. For operations using the remote controller, is page 6.
• <> indicates the variable screens/menus/ operations/settings that appear on the touch panel.
• [] indicates the buttons on the touch panel.

INTRODUCTIONS

Overview Of The Main Unit

1. Loading slot
2. A (Eject) button
   Ejects the disc.
3. Reset button/Power indicator indicator
   Resets the unit. (es page 3)
   Lights up while the unit is turned on.
4. MENU button
   Turns off the power. (Hold)
   Turns on the power. (Press)
   Displays the < Top Menu > screen.
5. (Press)
6. AUD button
   Displays the < Equalizer > screen.
   (Press) (ror page 24)
7. VOL/Mute knob
   Turns on/off the mute. (Press)|
   Adjusts the audio volume. (Turn)|
   USB input terminal
8. iPod/AV IN2 input terminal
9. Remote sensor

Overview Of The Remote Control

CAUTION

• Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries promptly. If swallowed contact physician immediately.
• Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result.
• Do not set the remote ontrol in hot places such as on the dashboard.
• The Lithium battery is in danger of explosion if replaced incorrectly. Replace only with the same or equivalent type.

How to install the battery

• If the effectiveness of the remote control decreases, replace the batteries.
• Aim the remote control directly at the remote sensor on the faceplate.
• DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).

Setting the clock

Display the <Top Menu > screen.

• On the source control screen:

• Select the hour or minute.

Selecting the playback source

DISC (ka page 10)
Plays a disc.
TUNER (ra page 22)
Switches to the radio broadcast.
iPod*’ (43 page 19)
Plays an iPod/iPhone.
USB (rar page 16)
Plays files on a USB device.
AV IN1/AV IN2*1

• Switches to an external component connected to AV IN1 and (ra page 23) iPod/AV IN2 input terminals.
• Select an appropriate input setting on <AV IN SETUP >. (435 page 28)

Displaying the source control screen

On video playback screen

• The operation buttons disappear by touching the screen.

Disc operations

Playing a disc

• If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eiect the disc.

Inserting a disc

• The source changes to “DISC” and playback starts.
• If”O” appears on the screen, the unit cannot accept the operation you have tried to do.
• In some cases, without showing “O”, operations will not be accepted.
• When playing back a multi-channel encoded disc, the multi-channel signals are downmixed to stereo.

Ejecting a disc

• You can eject a disc when playing another AV source.
• If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. When removing a disc, pull it horizontally.

Playable disc types
Disc type
DVD
DVD Recordable/
Rewritable
(DVD-R/-RW, +R/+RW*3)
DVD Video: UDF bridge
MPEG1/MPEG2/MPEG4/ JPEG/MP3/WMA:
ISO 9660 level 1, level 2,
Romeo, Joliet
Dual Disc
CD/VCD
CD Recordable/
Rewritable
(CD-R/-RW)
ISO 9660 level 1, level 2,
Romeo, Joliet
Recording format, file type, etc.
DVD-Video *1

Region Code:

• For DDX155:5
• For DDX1035: 3/
• For DDX1035M: 2|

Playable
DVD-Audio/DVD-ROM
DVD-Video
MPEG1/MPEG2/MPEG4
JPEG
MP3/WMA
DVD-VR/DVD+VR/DVD-RAM/DivX/WAV/AAC
DVD side/Non-DVD side
Audio CD
VCD (Video CD)
SVCD (Super Video CD)/CD-ROM/CD-I (CD-I
Ready)
CD-DA
VCD (Video CD)
MPEG1/MPEG2/MPEG4
JPEG
MP3/WMA
DivX/WAV/AAC
JOK
X NO
JOK
X NO
XNO
JOK
X NO
JOK
XNO

• If you insert a DVD Video disc of an incorrect Region Code, “DVD Region error” appears on the screen.
• It is possible to play back finalized +R/+RW (Video format only) discs. “DVD” is selected as its disc type when a +R/+RW disc is loaded. +RW double layer discs are not playable.

Playback operations

To display the source control screen, page 9.

• Search speed varies depending on the type of disc or file.
• Does not appear for VCD.

For CD/MP3/WMA

• Search speed varies depending on the type of disc or file.
• Does not appear for CD.

Selecting folder/track on the list

Playing Recordable/Rewritable discs

• This unit can recognize a total of 9 999 files and 999 folders (a maximum of 9 999 files per folder).
• Use only “finalized” discs.
• This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing.
• Some discs or files may not be played back due to their characteristics or recording conditions.

Video menu operations

• You can display the video menu screen during video playback.
• Available items on the screen differ depending on the types of the loaded disc and playback files.
• The operation buttons disappear by touching the screen.

Audio
Subtitle
MENU
Aspect
Direct
Selects the audio type.
Selects the subtitle type.
Displays the disc menu
(DVD).
Selects the aspect ratio. (e page 26)
Displays/hides the direct selecting buttons. (ea below)

• To select a title, chapter, or time directly

• When you enter a wrong number, press (X] to delete the last entry. Press [CLR) to delete the all entry.

Setting the functions

For DVD

• Each time you press the button, the playback mode changes.
• Available items differ depending on the types of loaded disc and playback file.

Setting < Video Setting>

• You can change the setting for video playback. (ear page 26)
  For VCD

• Each time you press the button, the playback mode changes.
• Available items differ depending on the types of loaded disc and playback file.

Setting < Repeat>

Display
Playback mode
One
Repeats the current track.
(When the PBC function
is off.)
All
Repeats all tracks.

For CD/MPEG1/MPEG2/MPEG4/MP3/WMA

• Each time you press the button, the playback mode changes.
• Available items differ depending on the types of loaded disc and playback file.

Setting < Repeat>

Display
Playback mode
One
Repeats the current track.
Folder
Repeats all tracks in the
current folder. (except for
CD)
All
Repeats all tracks.

Setting < Random>

Display
Playback mode
On
Randomly plays all tracks.
Off
Cancel all the random
function.

Setting < Video Setting>

• You can change the setting for video playback. (ar page 26)

USB operations

Playing a USB device

• This unit can play JPEG/MPEG1/MPEG2/ MPEG4/MP3/WMA files stored in a USB mass storage class device.
• This unit can recognize a total of 9 999 files and 999 folders (a maximum of 9 999 files per folder).
• Make sure all important data has been backed up to avoid losing the data.
• Connecting a USB device You can connect a USB mass storage class device such as a USB memory, Digital Audio Player etc. to the unit.
• You cannot connect a computer or portable HDD to the USB input terminal.
• To connect a USB device, * page 37. When a USB device is connected… The source changes to “USB” and playback starts.
• All tracks in the USB device will be played repeatedly until you change the source.

Cautions:

• This unit may not play back files in a USB device properly when using a USB extension cable.
• USB devices equipped with special functions such as data security functions cannot be used with the unit.
• Do not use a USB device with 2 or more partitions.
• Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose.
• This unit may not recognize a memory card inserted into the USB card reader.
• When connecting with a USB cable, use the USB 2.0 cable.
• The maximum number of characters:
• Folder names: 15 characters
• File names: 15 characters
• Avoid using the USB device if it might effect driving safety.
• Do not pull out and connect the USB device repeatedly while “Reading..” is shown on the screen.
• Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device.
• Operation and power supply may not work as intended for some USB devices.
• Do not leave a USB device in the car, or expose to direct sunlight or high temperature to avoid deformation or damage to the device.
• To display the source control screen, er page 9.
• To change settings for video playback, er page 14.

Setting the functions

For music

Setting < Repeat>

Display
Playback mode
One
Repeats the current track.
Folder
Repeats all tracks in the current folder.
All Repeats all tracks.

Setting < Random>

Display
Playback mode
On
Randomly plays all tracks.
Off
Cancel all the random function.

For photo/movie

Setting < Repeat>

Display
Playback mode One
Repeats current songs. Folder
Repeats all tracks in the current folder.
All Repeats all songs.

Setting < Video Setting>

• You can change the setting for video playback. (* page 26)

Listening to the iPod/iPhone device

Preparation

• Connect iPod/iPhone. (er page 37)
• When connecting iPhone/iPod touch, turn off App beforehand; otherwise the playback may not be started after connection.
• Use the following cables:
• To watch the video and to listen to the music (digital): USB Audio and Video cable for iPod/iPhoneKCA-iP22F (sold separately)
• To listen to the music (digital): USB Audio cable for iPod/iPhone—USB 2.0 cable (accessory of the iPod/iPhone) |
• Select appropriate input settings on <AV IN SETUP > according to the connection method (rar the right column)
• Do not use extension cables. iPod/iPhone that can be connected to this unit: Made for
• iPod classic
• iPod nano (7th Generation)
• iPod nano (6th Generation) |
• iPod nano (5th Generation)
• iPod nano (4th Generation)
• iPod nano (3rd Generation)
• iPod touch (5th Generation)
• iPod touch (4th Generation) |
• iPod touch (3rd Generation) |
• iPod touch (2nd Generation)
• iPhone 5
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G

Settings for iPod playback When the source is “iPod”.

Setting <AV IN SETUP> for iPod/iPhone playback

• On < Top Menu>:

• AV IN2
  Select this when connecting the iPod/iPhone using the USB Audio cable for iPod/ iPhone.
• iPod
  Select this when connecting the iPod/iPhone using the USB Audio and Video cable for iPod/iPhone.

iPod/iPhone playback operations from the unit

• To display the source control screen, er page 9.
• To change settings for video playback, er page 14.

• Resume playback is unavailable for video files.
• When using iPod with video, you can control playback only from the unit.
• When you turn on this unit, the iPod/iPhone is charged through the unit.
• The text information may not be displayed correctly.
• For some iPod/iPhone models, the performance may be abnormal or unstable during operation. In this case, disconnect the iPod/iPhone device, then check its condition. If the performance is not improved or is slow, reset your iPod/iPhone.
• For the latest compatible list and software version of iPod/iPhone, see: www.kenwood.com/cs/ce/ipod

Maintenance

Caution on cleaning the unit

• Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit.
• Recommended cleaning method: Gently wipe the panel with a soft, dry cloth.

Moisture condensation

• Moisture may condense on the lens inside the unit in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car. Should this occur, the unit may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture evaporates.

How to handle discs

• When removing a disc from its case, press Center holder down the center holder of the case and lift the disc out, holding it by the edges.
• Always hold the disc by the edges. Do not touch its recording surface.
• When storing a disc in its case, gently insert the disc around the center holder (with the printed surface facing up).
• Make sure to store discs in their cases after use.

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

• For operations with the external components, refer also to the instructions supplied with the adapters used for the connections (as well as the instructions supplied with the external components).
• If there seems to be a problem Disc in general Symptom No sound comes out of the speakers. Remedy/Cause
• Adjust the volume to the optimum level.
• Check the cords and connections.
• The unit does not work at all.
• The remote controller does not Reset the unit. (*r page 3) Replace the battery. work. AME automatic presetting does Store stations manually. (** page 22) not work.
• Static noise while listening to Connect the antenna firmly. the radio.
• Recordable/Rewritable discs| cannot be played back.
• Tracks on the Recordable/
• Insert a finalized disc.
• Finalize the discs with the component which you used for recording.
• Rewritable discs cannot be skipped.
• Playback does not start.
• No picture appears on the external monitor.
• Disc cannot be played back. MPEG1/MPEG2/MPEG4/ JPEG/MP3/WMA
• The format of files is not supported by the unit.
• Connect the video cord correctly.
• Select the correct input on the external monitor.
• Record the tracks using a compliant application on the appropriate discs. (* page 11)
• Add appropriate extension codes to the file names.
• Tracks are not played back as
• Playback order may differ from the one played back you have intended them to play. using other players.

REFRENCE LINK

https://www.kenwood.eu/car/navigation_multimedia/multimedia/DDX3015/?view=details