Table of contents
show
Yealink W73P DECT IP Phone System User Manual
Package Contents
Note: Yealink W73P DECT IP phone consists of one W70B base station and one W73H handset.
Assembling the DECT Phone
- Connect the base station power and the network using method a or method b.
Note:
- If you choose method a, use Yealink supplied power adapter (5V/0.6A). A third-party power adapter may damage the base station.
- If you choose method b, you do not need to connect the power adapter. Make sure the hub/switch is PoEcompliant.
- (Desktop Installation) Attach and remove the base stand.
- (Wall-Mount Installation) Attach the base station.
- Insert the battery into the handset.
- Attach the belt clip to the handset.
- (Optional) Mount the charging cradle to the wall.
- Connect the charging cradle and charge the handset.
Note:
- Use Yealink-supplied power adapter (5V/0.6A). A third-party power adapter may damage the handset.
- Check the charging status on the top-right corner of the LCD screen.
Hardware Component Instructions
Regulatory Notices
Operating Ambient Temperatures
- Operating temperature: +14 to 122°F (-10 to 50°C)
- Relative humidity: 5% to 90%, noncondensing
- Storage temperature: -22 to +158°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally in accordance with the operating instructions and the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim from a third party. We are not liable for problems with Yealink device arising from the use of this product; we are not liable for financial damages, lost profits, claims from third parties, etc., arising from the use of this product.
REFRENCE LINK
