You are currently viewing Bird X Peller Digital Electronic Goose Repeller User Manual

Bird X Peller Digital Electronic Goose Repeller User Manual

Bird X Peller Digital Electronic Goose Repeller User Manual

Bird X Peller Digital Electronic Goose Repeller User Manual prduct img

WHY GOOSEBUSTER?

Presently between 3.5 and 5.5 million non-migratory Giant Canada geese reside in the U.S. and lower Canada. They are joined by an additional 9 to 11 million migrant Canada geese from northern Canada each fall to late spring. This population is growing exponentially at the rate of 30% each year, and the resulting mess they create (at least a pound of droppings per day per goose!) is both unsightly and unhealthy. Moreover, it increases the fecal coliform levels in ponds and can contaminate adjacent water and ground.

HUMANE BIRD CONTROL
No birds were harmed in the development of this product, nor will any be harmed by its operation.

OUR CREDENTIALS
The development of GooseBuster was based on the scientific lab and field studies conducted by Dr. Philip Whitford, a noted expert in the field of animal behavior. Dr. Whitford holds an endowed chair in the Biology Department of Capital University, Columbus, OH. He has studied Canada goose behavior and vocal communications since 1979 and has published more than 60 articles (23 on Canada geese and other waterfowl), given many professional presentations, and produced two videos on the complex behavior and communication patterns of Canada geese. He has a Ph.D. in biological sciences (animal behavior) and B.S. and M.S. degrees in wildlife management. [On request, Dr. Whitford is available for professional consultation. Please contact Bird-X, Inc. for availability and fees.]

SOUNDS

The use of distress cries to repel birds is a well-established and proven technique. However, GooseBuster is the first and only device to use the actual alert and alarm calls of Canada geese recorded under natural conditions, evoking immediate recognition and instinctive responses. “Alert” signifies uneasiness or concern about potential danger sources; “Alarm” denotes immediate danger requiring instant evacuation, without lingering to identify the source. Calls differ in frequency, duration, and intervals. Sound combinations, sequences, and speaker selection change randomly, causing geese to perceive multiple birds in motion in several locations. These built-in changes also make it virtually impossible for the geese to habituate.

COVERAGE
It is important to utilize a sufficient number of units to cover the entire area. One unit can cover 1.5 acres, but adding a second unit increases coverage dramatically. Field testing has demonstrated that the synergistic additive effect more than doubles coverage to 4 to 6 acres. Broadcasting calls from more than one source present a greater sense of danger to the geese while significantly reducing per-acre cost.

COMPONENT ASSEMBLY

Your GooseBuster includes a control unit, AC power adapter, mounting hardware, and one speaker with 10 feet of wire. An optional AC timer is available, as well as an optional 12VDC accessory kit with a 12VDC timer with battery cables. [An optional Solar Power Panel to continuously recharge a 12V battery is also available; battery not included.]

Bird X Peller Digital Electronic Goose Repeller User Manual fig 1

Open the control unit by lifting (releasing) the two latches on the side of the enclosure. Be certain that the power switch is OFF. Plug the speaker wire and the AC power adapter (or DC timer with battery cables) into their respective jacks on the control panel, then route both wires down through the bottom hole notch of the enclosure. Close both latches on the cover.

INSTALLING THE CONTROL UNIT
Mount the control unit box to a wall, post or other vertical surface using the enclosed mounting hardware. Plug the power adapter into an electrical outlet. [DC units: Attach the battery clips to a 12V battery.] Mount multiple control units about 1,000 feet apart. NOTE: Periodically moving the speaker every few days further increases the geese’s uneasiness and desire to vacate.

SETTINGS

  • Power Switch/Time Interval. Initially — set to LONG ON (5-10 minute intervals between series of calls). After initial routing — change to EXTRA LONG ON (10-30 minute intervals) to prevent their return. Once the unit is OFF, leave it off for a minimum of 30 seconds to allow the electronics to reset. To test the unit (i.e., hear its sound), slide the switch to TEST for immediate sound output. Do not leave the unit on TEST during actual operation.
  • Volume. Initially — set to the highest volume. After initial routing — modulate volume up and down periodically to provide variability.
  • Timer Use. Use when there is a predictable daily arrival pattern. Set the unit to LONG ON and set it to activate from one hour before to one hour after arrival time. To use an optional AC timer, plug your GooseBuster into the AC timer and the timer into a protected outdoor rated outlet, and then see the enclosed timer instructions. To use a 12VDC timer, which is shipped attached, refer to the provided DC timer instructions.
ADDITIONAL SOUNDS

Besides the goose calls, for maximum effectiveness, the GooseBuster offers two additional sound options: COYOTE and GUNSHOT. (See switches on the faceplate.) When these switches are selected ON, various coyote sounds and specially recorded hunters’ gunshots will be incorporated into the whole randomized GooseBuster output, along with the natural goose alarm and alert calls.

These optional sounds will play occasionally and may not play in every sequence — but they will play sometimes if selected. Initial settings: In unrestricted circumstances, initially setting both additional sound switches to ON will bring the best results. This creates the most realistic and randomized combination of sounds most frightening to geese.

However, if you do not wish to include either of these sounds — for example if the GooseBuster is deployed in an urban or public setting where coyote sounds or the recording of a shotgun may cause surprise or alarm to people — then set either or both of these additional sound switches to OFF. Ongoing goose control: Once the problem geese have left the area, we recommend that you turn these additional switches OFF for long-term maintenance, and save them only for use with difficult geese or new arrivals.

OVERVIEW OF GOOSE REACTION

Testing has shown considerable variation in initial goose reaction to GooseBuster, from immediate and total departure to mild verbal and physical response. Results depend on past experience of geese, length of residency, and season. Regardless of initial reaction, complete goose control is commensurate with your commitment to invest both time and effort. Your strongest efforts are needed at the outset; they will diminish as you achieve success.

GooseBuster uses geese’s long-term memory against them — once scared away repeatedly, they rarely return. Establish Zero Tolerance: Always drive all geese (original infester, returning birds, and newcomers) completely off the property immediately. Success is achievable if you prevent geese from claiming stakes rather than waiting — often for as short a time as 20 minutes — until they establish proprietorship.

WHEN TO INSTALL

Relocation efficiency will be greatly influenced by the season you install. If you install in…

  • Late summer to early winter, when all geese can fly and goslings don’t require special feeding areas, you will experience the quickest success. New arrivals will leave abruptly in a panic, encouraging original residents to bolt as well.
  • Late winter to early spring, as nesting season approaches and geese claim territories, it will take more effort. The earlier you deploy GooseBuster the better, to persuade the geese to move before they begin nesting. Once they’ve settled in, especially with pronounced nest site loyalty, it’s much harder to get them to go.
  • Mid-spring, when nests are constructed and eggs are laid, you’ll face even greater challenges. But even then the majority of geese, faced with constant harassment, will abandon their nests.
  • Late spring to mid-summer, as eggs hatch but goslings cannot yet fly, you’ll benefit from another period of less resistance. Adult geese will readily lead their young away from perceived danger.
  • In any season, GooseBuster will induce other birds to broadcast their alarm calls, imparting a greater sense of danger to the geese.

TYPES OF HARASSMENT

Use multiple people performing various multiple movements; variation is most important. Walk or run toward the geese while waving your arms. Stare at geese while approaching. Drive a lawnmower or other groundskeeping equipment toward them, or operate machinery nearby. “Fish” with a large surface lure near geese on ponds. Jog near geese (or be lucky and have joggers already running nearby). Use pyrotechnics, cracker shells, and fireworks (no permit is required for use on geese, but check local noise/fireworks ordinances).

If they’re on a pond, use cracker shells and/or drag a floating rope across the pond right after turning GooseBuster on to force the geese to fly to another site. Water normally provides safe haven from predators and disturbance, but this can be overcome with a bit of ingenuity and effort. Exclude them from water — prevent them from entering or leaving water areas with low fencing or fishing line strung at 6 and 12-inch heights during brood-rearing and flightless periods of the year. Geese will avoid an area with no access to water’s safety and nourishment. Use dogs, any breed that will chase geese and return on command, but you have a responsibility to prevent any harm to geese, goslings, or eggs.

POST-REMOVAL ACTIVITY
Turn the unit off until other geese appear. Chase off returning geese immediately. Then leave GooseBuster set to EXTRA LONG ON to prevent new geese from moving into areas abandoned by former residents. Once GooseBuster has routed geese, use it only as needed (not activated full time) to reinforce their avoidance and to ensure longest-term effectiveness.

SPECIFICATIONS

  • Dimensions: Control Unit 6″ x 6″ x 3.5″, Speaker 5.5″ x 5.5″ x 5″
  • Speakers: 8 Ohms, 30 Watts
  • Weight: 7 Pounds
  • Power Requirements: 1 Amp 110VAC or 220VAC adapter, or 12VDC
  • Sound Pressure: 0 – 110 dB @ 1 meter
  • Frequency: 500 ~ 1,500 Hz
  • Compliance: The supply power source is UL, CUL, and CE listed. EPA Est. 075130-OR-001
  • Reorder Part #s: #GB-1: 110V unit

CAUTION:
Bird droppings are unhealthy – even potentially fatal. At least sixty transmissible diseases have been associated with birds and exposure to their excrement. Prior to cleaning up any type of droppings, it is important to take all necessary protective measures, including but not limited to protective respiration devices, gloves, clothing, and safety eyewear. Your health and safety are important: please seek professional advice and information appropriate to your situation. Never clean up or risk other exposure to droppings without using protection. Do not ask others to enter or clean up potentially hazardous areas without ensuring that they are similarly protected.

TROUBLESHOOTING
PROBLEMPOSSIBLE SOLUTIONS
Check the volume setting.
The unit is on, but there is no audible output.Check that the unit is scheduled to be on (per timer).

Check that you are not in the middle of a silent period between rounds of sounds.

Check that the speaker is connected.
The unit does not function properly when connected

to a 12-volt battery.

Check battery condition.

Turn the power switch on the unit to the OFF position, reconnect the battery, wait 30 seconds, then switch the unit back to LONG ON.

 

LIMITED WARRANTY:
This GooseBuster Pro unit is guaranteed against defects in material and workmanship for six months from the date of purchase (extended warranty available). Bird-X will replace or repair, provided the defect occurs under normal use. Returns are accepted only with authorization from our Chicago office.

DOWNLOAD PDF

Bird X Peller Digital Electronic Goose Repeller User Manual

REFERENCE LINK

Leave a Reply