Panasonic-DMC-FT30EG-Digital-Camera-feature

Panasonic DMC-FT30EG Digital Camera User Manual

Panasonic logo

Panasonic DMC-FT30EG Digital CameraPanasonic-DMC-FT30EG-Digital-Camera-product

Introduction

  • The purpose of issuing this Service Manual is that to introduce the following newly added models. DMC FT30EG/EP/EF/EB/EE/GC/GA/GN, DMC-TS30P/PC/PU/GK
  • This Service Manual contains technical information which will help service personnel to understand and service the Digital Camera; DMC-FT30EG/EP/EF/EB/EE/GC/GA/GN, DMC-TS30P/PC/PU/GK. • Since this Service Manual does not cover the same part which is already described in the Original Service Manual for DMC-FT30,TS30 series, when servicing, refer to the descriptions in the Service Manual for DMC-FT25EB/EE/EF/EG/EP/GA/GC/GF/GN,TS25P/PC/PU/GK, Order No.DSC1302002CE.

Service Navigation

How to Define the Model Suffix (NTSC or PAL model)

There are seven kinds of DMC-FT30/TS30, regardless of the colours.

  •  a) DMC-TS30P/PC
  •  b) DMC-FT30EB/EF/EG/EP
  •  c) DMC-FT30EE
  •  d) DMC-FT30GN
  •  e) DMC-TS30GK
  •  f) DMC-FT30GC/GA,DMC-TS30PU

What is the difference is that the “INITIAL SETTINGS” data which is stored in Flash ROM mounted on Main P.C.B.

Defining methods
To define the model suffix to be serviced, refer to the nameplate which is putted on the bottom side of the Unit.Panasonic-DMC-FT30EG-Digital-Camera-fig1

Note:
After replacing the Main P.C.B., be sure to achieve adjustment.
The Maintenance software (DIAS) is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in “TSN system”.

INITIAL SETTINGS
After replacing the Main P.C.B., be sure to perform the initial settings after achieving the adjustment by ordering the following
procedure in accordance with model suffix of the unit.

IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.

2. PROCEDURES

  •  Precautions: Read the above “CAUTION 1” and “CAUTION 2”, carefully
  •  Preparation:
  1.  Attach the Battery to the unit.
  2.  Set to NORMAL PICTURE mode by operating the mode button.

Note:
If the picture mode is other than NORMAL PICTURE mode, it does not display the initial settings menu.

  •  Step 1. The temporary cancellation of “INITIAL SETTINGS”:
    While keep pressing “UP of Cursor button” and MOTION PICTURE button simultaneously, turn the Power on.
  •  Step 2. The cancellation of “INITIAL SETTINGS”:
    Press the PLAYBACK button.
    Press “UP of Cursor button” and MOTION PICTURE button simultaneously, then turn the Power off.
  •  Step 3. Turn the Power on:
    Turn the Power on.
  •  Step 4. Display the “INITIAL SETTINGS” menu:
    While keep pressing MENU/SET and “RIGHT of Cursor button” simultaneously, turn the Power off.
    The “INITIAL SETTINGS” menu is displayed.
    There are two kinds of “INITIAL SETTINGS” menu form as follows:
    [CASE 1. After replacing Main P.C.B.]
    When Main P.C.B. has just been replaced, the following model suffix list is displayed as follows. (Six pages in total)Panasonic-DMC-FT30EG-Digital-Camera-fig2[CASE 2. Other than “After replacing Main P.C.B.”]Panasonic-DMC-FT30EG-Digital-Camera-fig3
  •  Step 5. Choose the model suffix in “INITIAL SETTINGS”: (Refer to “CAUTION 1”)
    [Caution: After replacing Main P.C.B.]
    (Especially, other than “EG, EF, EB and EP” models)
    The model suffix can be chosen, JUST ONE TIME.
    Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can be changed.
    Therefore, select the area carefully.
    Select the area with pressing “UP / DOWN of Cursor buttons”.
  • Step 6. Set the model suffix at “INITIAL SETTINGS”:
    Press the “RIGHT of Cursor buttons”.
    The only set area is displayed. Press the “RIGHT of Cursor buttons” after confirmation.
    (The unit is powered off automatically.)Panasonic-DMC-FT30EG-Digital-Camera-fig4
  • Step 7. CONFIRMATION:
    Confirm the display of “PLEASE SET THE CLOCK” in concerned language when the unit is turned on again.
    When the unit is connected to PC with USB cable, it is detected as removable media.
    1) As for your reference, major default setting condition is as shown in the following table.
    Default setting (After “INITIAL SETTINGS”)Panasonic-DMC-FT30EG-Digital-Camera-fig5

Replacement Parts List

Note:

  1. Be sure to make your orders of replacement parts according to this list.
  2. IMPORTANT SAFETY NOTICE
    Components identified with the mark do have the special characteristics for safety
    When replacing any of these components, use only the same type.
  3. 3. Unless otherwise specified,
    All resistors are in OHMS. K=1.000 OHMS. All capacitors are in MICRO-FARADS (uf), PRUUF,
  4. The marking (RTL) indicates the retention time is limed for this item, After the discontinuation
    of this assembly in production. it will no longer be available.
  5.  Supply of CD-ROM, in accordance with license protection, is allowable as replacement parts on for customers who accidentally damaged or lost inner own.

E.S.D. standards for Electrostatically Sensitive Devices, refer to PREVENTION OF
ELECTROSTATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES section.

Definition of Parts supplier

  1.  Parts marked with [ENERGY] in the remarks column are supplied from Panasonic corporation Energy company.
  2.  Parts marked with (SPC] in the remarks column are supplied from AVC-CSC-SPC.

Electrical Component

COMPARISON CHART:
The following tables show the difference between DMC-FT25/TS25 series and DMC-FT30/TS30 series.Panasonic-DMC-FT30EG-Digital-Camera-fig6

Frame and Casing Section

COMPARISON CHART:
The following tables show the difference between DMC-FT25/TS25 series and DMC-FT30/TS30 series.Panasonic-DMC-FT30EG-Digital-Camera-fig7

Packing and Accessories SectionPanasonic-DMC-FT30EG-Digital-Camera-fig8
Panasonic-DMC-FT30EG-Digital-Camera-fig9

Exploded viewPanasonic-DMC-FT30EG-Digital-Camera-fig10Panasonic-DMC-FT30EG-Digital-Camera-fig11

Download Pdf Link

https://manuals.plus/m/c30782960f4893e1f5e47fd0e728653e225db93f91e3c6c064c454bba9012752_optim.pdf

Leave a Reply