Monster-Dna-Max-Wireless-Speaker-FEATURE

Monster DNA Max Wireless Speaker User Manual

MONSTER Logo

Monster DNA Max Wireless Speaker User Manual

Monster-Dna-Max-Wireless-Speaker-IMG

Caution: The batteries in this product are not replaceable. During use, storage or transportation the battery should not be subjected to extremely low temperatures, or low air pressure at high altitude. If the battery is exposed to extremely high temperatures it could result in an explosion or the leaking of flammable liquid or gas. Please take care when disposing of the unit; disposal in a fire, oven, mechanically crushing or cutting machine could cause an explosion.

Warning: Do not dispose of the unit in fire or water. Never attempt to disassemble and reassemble. Waste electrical products should not be disposed of with household waste, please recycle where facilities exist. Check with your local authority for recycling advice. Keep your device and all accessories out of the reach of children and animals. Small parts may cause choking or serious injury if swallowed. Avoid exposing your device to very cold or very hot temperatures (Below 0° or above 45° C). Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device. Do not allow your device to get wet, liquids can cause serious damage. Do not handle your device with wet hands. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc., iPhone, iPad and Mac is a trademark of Apple Inc., registered in the U.S. and other countries.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a wireless power charger, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Speaker Function Operation

Power Button:

Press once: answer call/end call/play/pause Press and hold for 2s: power on/off/call reject

Volume + / Next Track:

Press once: volume up Press and hold for 2s: next track

Volume – / Previous Track:

Press once: volume down Press and hold for 2s: previous track

Monster Share™, Party Mode:

Press and hold 2s to set transmitting speaker Press once to set receiving speakers Connect up to 99 Monster DNA Speakers

Bluetooth Pairing Button:

Press and hold for 2s : Bluetooth pairing Charging Port(USB-C™)

Battery Level Indication

Press and hold “-” and “+” buttons for 1s for battery level indication

Monster-Dna-Max-Wireless-Speaker-Fig1

Function:

Pairing – First time:
  • Press and hold the Power button around 2s to turn on the speaker.
  • When turning the speaker on for the first time, it will automatically be in pairing mode. The LED Ring will flash Blue in a clockwise motion.
  • Activate your Bluetooth device and search for “Monster DNA MAX” speaker.
  • Once the speaker is connected successfully, the LED Ring lights up blue for 3s, then turns off.
Pairing – Manually:
  • After power is on, the speaker will attempt to connect to the last connected device.
  • To pair another device, press and hold the Bluetooth Pairing Button for
  • The LED Ring will flash Blue in a clockwise motion.
  • Activate your Bluetooth device and search for “Monster DNA MAX” speaker.
  • Short press Bluetooth Pairing button again to disconnect.
Bluetooth Mode:
  • Press once: Volume +/- button for volume up/down
  • Press and hold for 2s: Volume +/- button for next/previous track
  • Press once: Power button to start music play/pause
  • Press once: Power button to answer an incoming call or ending a call
  • Press and hold for 2s: Power button to reject an incoming call
USB/Wireless Charging:
  • To charge the speaker by USB-C, connect the included USB-C cable and plug it into a USB power source (such as the USB-C wall adapter provided). For wireless charging, connect the Wireless Charging Base to the wall adaptor and place the speaker directly on it.
  • The LED Ring light will ‘breathe’ with a white glow while charging.
  • Once fully charged, the LED Ring will show a white light for 5s, then turn off.

Charging Out:

  • Connect your device(such as a smartphone) to the speaker’s Charging Port and charging will start automatically.
Monster Share™, Party Mode:
  • Turn on all Monster DNA speakers you would like to connect by pressing and holding the Power button for 2s.
  • Connect to one of the Monster DNA speakers by Bluetooth, and press and hold the ‘Monster Share™ Party Mode’ button for 2s to set this as the main transmitting speaker. A flashing purple light will appear indicating Party Mode transmission is in pairing mode.
  • Single press the ‘Monster Share™ Party Mode’ button on all other speakers that you would like to set as receiving speakers. A green light will flash in a circle while pairing and will turn solid Green once paired.
  • If speakers are not paired within 30s, ‘Monster Share™ Party Mode’ pairing will time out. Restart this process to connect additional speakers.
  • Press the ‘Monster Share™ Party Mode’ button once again to exit Party Mode. *Monster Share™ Party Mode works with compatible Monster Speakers enabled with Monster Share™ technology

Auto Power Off:

The speaker will turn off automatically in 15 minutes if no connection was found or idling.

DOWNLOAD PDF LINK

https://manuals.plus/m/9cc3323abeed569f24af0a981c4b72338ba2135472e2780bc3df28c4f5cbf492_optim.pdf

Leave a Reply