DOQAUS CARE 3 Wireless Headphones User Manual

DOQAUS CARE 3 Wireless Headphones User Manual

Dear Customers:
Thanks for buying DOQAUS Bluetooth headphones, please read this user’s manual thoroughly before using them.

Packaging includes

• DOQAUS Headphone x1 Pc
• Storage Bag x1 Pc
• AUX Cable x1 Pc
• User’s Manual x1 Pc
• Charging Cable x1 Pc

Function button Diagram 1

1. DC 5V Micro-USB Charging port
2. EQ mode button: press once to choose different sound effects (EQ mode). The EQ mode is only available when headphone mode is activated On the status of bluetooth mode: press and hold for more than 3 seconds to dial back.
3. Power On/Off button (Multi-Function Button-MFB): press once to switch mode. Press and hold to power on and off. Press and hold 5 seconds to pair bluetooth. (the indicator light flashing).
4. The system indicator light is lit when charging
5. AUX Input Port/Built-in Reset button
6. TF card insert

Function button Diagram 2

• Reverse clock volume plus Right
• Subsequent clock volume reduction

1. Volume controller: Reverse clock volume plus, subsequent clock volume reduction;
   
2. Multimedia controller: press once to play/pause, press and hold to the previous song, and click 2 times to the next song
   Incoming call:: press once to answer, press and hold for 3 seconds to reject.
   Outgoing call: press once to cancel;
   Ongoing call: press once to end the call; Press and hold for 3 seconds to choose the calls hearing and talking via cell phone or DOQAUS headphones.

Specifications

• Bluetooth Version: 4.2
• Distance: up to 10 meters(33 feet)
• Output power: RMS 110mW*2
• Input power: DC 5V (>500mA)
• Speaker: 40MM
• Signal-to-noise ratio: ≥95db
• Total Harmonic Distortion: <1%
• Battery: 3.7V,600mAH
• Playtime: Up to 22 hours
• Standby time: up to 3000 hours
• Charging time: 3 hours

 Sound Effects, you choose the one you like
When the headphone mode is activated, Press once EQ mode button, and the prompt sounds indicates successfully switching to another sound effect.

1. Normal sound effects (the treble, middle, and bass equal)
2. Bass sound effect(super bass)
3.  High-definition sound effects (voice clear)
   Note: This headphone will remember the sound effect you enjoyed last time once you power on again.

Bluetooth pairing, start to enjoy music:

1. CARE 3 starts bluetooth pairing mode automatically the first time it is used.
2. Once the connected device wants to connect the headphone bluetooth again: press the power button and hold for 55. After the prompt sounds, the bluetooth pairing starts while the white indicator will be flashing.
3. Turn on the bluetooth of your device, such as a cell phone, iPad, or PC, or else, search and select “DOQAUS CARE 3” from the list of Bluetooth devices. The bluetooth KEY is 0000 if there is necessary to enter.
4. Once paired successfully, the blue LED light will blink 2 times in 5 seconds, and then you can enjoy music.

Power management, Power off automatically:

1. Power on the headphones, leave them without playing, it will power off in 10mins.
2. Power on the headphones, leave them without pairing the bluetooth, it will power off in 5 minutes.

Charging:
Do not use the adaptor without Safety certification, not rated 5V. ( The headphone is designed with a power protection circuit. The headphones will stop charging to protect the battery and itself if the adaptor is unmatched.)

1. On the status of power on, when the prompt indicates the battery is low, please charge the headphone as soon as possible.
2. The red light is on when charging. A green light is on which indicates that the battery is fully charged or doesn’t need to charge.

Reset:
The Reset button is built into the AUX jack. In some uncertain conditions, the headphone is disordered and need to be activated. Please use a screw or other small thing which can be inserted into the AUX jack and press the Reset button inside. Then please power on the unit again. (please charge first if no power.)

FAQ:

Q: How to pair the bluetooth?
A: Power on the CARE 3 headset, the indicator is flashing in white color indicating the bluetooth pairing mode. Turn on the bluetooth of your device, search, and select “DOQAUS CARE 3” from the list of Bluetooth devices. The blue light will flash 2 times every 5 seconds once pairing successfully.

Q: Can be connected with a laptop,iPad, or PS4?
A: The headphone can be compatible with all the devices with bluetooth and the function of Audio out.

Q: Can make phone calls via headphones?
A: Yes, CARE 3 has with built-in mic and can make hands-free calls.

REFERENCE LINK