Table of contents
show
Ecoflow Delta Pro Smart Home Panel User Manual
How to Connect Devices
- Enable Bluetooth
After supplying power to the SHP, open the front cover and short press the IOT button. Meanwhile, enable Bluetooth and Wi-Fi on the mobile phone.
- Search for devices
Open the Ecoflow app①, click the Add(+) icon in the upper-right corner to search for devices, and tap the device icon with the required serial number (SN) to connect the device.
Internet Setup
- Enter the name and password of your Wi-fi access to complete the network configuration① and then enable the IOT mode.
How to Configure Parameters
- Setting up the grid
Select your country and state②, and the system will automatically adapt to the local grid parameters. If there is any error, you can also modify the parameters manually. If the local voltage is less than 120 V, you can enable the split-phase③ function.
- Setting up My Home
You need to configure the parameter settings① for 10 household power circuits, including enabling or disabling each power circuits and setting a custom name and icon for each power circuits. When setting the rated current of a circuits, refer to the rated current of the circuits in the circuit breaker of SHP.
- Setting up the Power Station
Infinity AC1 and AC2 respectively correspond to the charging ports of two DELTA Pro devices. Set the rated current based on the power circuits connected to the DELTA Pro charging port. You can also enable the EPS mode in case of emergencies.
- Device Wiring Testing
During the initial circuit connection of SHP, the app throws out a Device Wiring Testing after you have configured the parameters. If you have reconfigured the circuit connection after using it for a period of time, find Device Wiring Testing by navigating to “Device Homepage – ⚙ Settings” in a timely manner to conduct self-check so as to ensure that the circuits is correct.
- During Device Wiring Testing, all load circuits in the SHP are disconnected, and the AC output/input ports of DELTA Pro are off. The self-check duration is about one second.
- If you are prompted with a wiring error, check manually as instructed (as shown in the left figure). If the Device Wiring Testing passes, the app throws out a prompt stating that the check succeeds①, and you can start using the SHP with confidence.
Common Functions
After configuring the parameters, you can go to the Device Homepage of the SHP to quickly try out its common functions.
- Set Automation
You can enjoy a smarter and more stable power consumption environment by configuring a schdule to regularly charge DELTA Pro or regularly switch the power supply mode of the circuit.You can turn on this option by tapping the Add(+) icon in the upper-right corner of the “Automation” page.
- Emergency backup policy
When the grid encounters an outage①, the system automatically switches the selected circuit to battery backup. When the power capacity becomes insufficient, only the prioritized circuits will be powered. You can adjust the priority of a circuit by long-tapping the icon for the circuit and dragging it up or down.
- Recharge DELTA Pro regularly
You can freely set the charging period, charging port, and charge level② to avoid forgetting to charge the device, resulting in insufficient power. Switch to battery backup regularly You can regularly switch certain circuits to be powered by DELTA Pro, so as to stagger the peak power consumption and save your electricity costs.
Monitor and control the 10 circuits
- On the circuit list page, you can view the power supply mode, real-time power, and total power consumption of each circuit. Tap the icon for a circuit to open the details page, where you can view the power consumption data of each circuit.
- Overview of electricity consumption data
On the “Dashboard” page, you can tap the options to view the total electricity consumption, total power station usage, and total grid power usage. In “Usage overview”, you can switch between daily data, weekly data, and monthly data②.
- DELTA Pro operation page
On the operation page of DELTA Pro, you can quickly understand the working status of DELTA Pro. By tapping the “Recharge” button, you can manually charge the power station, and the system will charge DELTA Pro with a power of 1,600 W, which will be automatically stopped when DELTA Pro is fully charged. You can also turn off this option manually
- Settings
On the “Settings” page, you can modify various parameters of the device, including basic information and power station parameters.
REFRENCE LINK
