Table of contents
show
EggPod Egg Cooker 2Pcs Wireless Microwave Hard Boiled User Guide
How to Connect
IMPORTANT SAFEGUARD
- Do not use without water.
- Do not cook for more than 11 minutes.
- Be cautious of hot steam when removing the top after microwave cooking.
- If the valve pops up, after the unit has cooled down, ensure the valve is clean and press down to its original position.
USAGE
- To unlock and open the EggPod, pull the tabs down.
- Measure 50ML of water using the provided measuring cup and fill the bottom of EggPod with water.
Place 4 eggs into the bottom tray.- Make sure the lid is properly aligned with the base of the EggPod and pull the tabs up to lock.
Place the unit into the microwave and cook for 9 minutes at a highest setting.- When finished cooking, allow EggPod to cool for 2 minutes before removing it from the microwave.
Place EggPod in the sink and carefully remove the top. Run under COLD water for 2 minutes.- Hold the unit by its handles and shake vigorously UP and DOWN 10 times.
Unlock and remove the top. You can now easily remove the eggshells.- Enjoy the perfectly cooked eggs!
Place 4 eggs into the bottom tray.
Place the unit into the microwave and cook for 9 minutes at a highest setting.
Place EggPod in the sink and carefully remove the top. Run under COLD water for 2 minutes.
Unlock and remove the top. You can now easily remove the eggshells.CARE & CLEANING
- Egg Pod™ is not dishwasher safe.
TO REMOVE BOTTOM INSERT
To remove bottom insert, turn the unit over and slide insert directly out.
TO REMOVE TOP INSERT
- To remove the top insert, turn counter-clockwise to unlock.