Panasonic EH-NA67 Hair Dryer Operating Instructions
Safety precautions
To reduce the risk of injury, loss of life, electric shock, fi re, and damage to property, always observe the following safety precautions.
Explanation of symbols
The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.
The following symbols are used to classify and describe the type of instructions to be observed.
Some parts of the safety precaution illustrations differ from the actual product.
WARNING
Parts identification
- Air outlet
- Concentrator nozzle
- nanoe™ outlet
- nanoe™ lamp
- Cool-shot button
- Handle
- Ring for hanging
- Cord
- Power plug
- Temperature selector
: Hot (Hot air)
: Warm (Warm air)
: Healthy (Mild air)
: Cool (Cool air) - Power switch ( )
- Turbo (Very strong airflow)
- Dry (Strong airflow)
- Set (Gentle airflow)
- Off
- Air inlet grille
- Filter
- Make sure to attach the filter to the air inlet when using the hair dryer.
- Panel
- Oscillating quick-dry nozzle
- Diffuser
How to use the hair dryer
Always check that the filter is securely attached before using.
- Select the temperature of the airflow with the temperature selector (J).
- Select the intensity of the airflow with the power switch (K).
Notes
- The air remains cool while the cool-shot button is held down.
- nanoe™ is produced when the power switch (K) is set to position 1 to 3.
- nanoe™ is invisible to the naked eye.
- If you are worried about hair damage, set the switch to
- Set (Gentle airfl ow)” before use.
- Drops of water may blow out of the nanoe™ outlet (C) during use, but this is not a malfunction.
- A humming noise may come out of the nanoe™ outlet (C), but this is the sound of nanoe™ being discharged and is nota malfunction.
- The effects of nanoe™ might not be felt by the following people. People with crimpy hair, strong curly hair, very smooth hair, short hair, or who have had a hair straightening perm in the last three or four months.
- You may notice a characteristic odor when using this hair dryer. This is not harmful to the human body.
- Do not look into the air outlet while in use.
To define the curls and waves with a diffuser
- Gently place the tip of your hair on the diffuser.
- Lift your curls up and down from your scalp whilst they are drying.
- Repeat all sections.
- Finally, adjust the overall fi nished look with your hands.
To increase hair volume with a diffuser
Attain volume by moving the diffuser in a circular motion over the scalp. Keep the diffuser held on specific areas of your head for a few seconds to attain volume as you wish. Repeat until your desired look is achieved.
To adjust hair fl ow with a diffuser
Comb the hair with a diffuser to dry the hair from the roots to the tips while pulling the ends of the hair.
The best recommended usage of the oscillating quick-dry nozzle
- The oscillating quick-dry nozzle will work only if you pull out the nozzle (see arrow). You need to hold the base of the nozzle in your hand and pull out the upper part until it has clicked.
- When using the oscillating quick-dry nozzle in automatic swing mode, make sure to set the wind speed to “3”.
- Please confirm that the power switch is set to the position “0” before using the oscillating quick-dry nozzle.
- Hold the both sides of the oscillating quick-dry nozzle with your hands, and pull it out gently with force until you hear a “click” sound, indicating that the automatic swing mode of the oscillating quick-dry nozzle has been turned on.
- Choose the temperature of wind as required.
- Set the power switch to “3”.
- If you want to dry your hair quickly, it is recommended to choose the mode “3” + “Hot” or “Warm”.
- Dry your hair, then turn off the automatic swing mode for the oscillating quick-dry nozzle before tidying your hair.
- Make sure that the power switch is set to the position “0”.
- Hold both sides of the oscillating quick-dry nozzle with your hands, and slightly press it inward with force until you hear a “click” sound, indicating that the automatic swing mode of the oscillating quick-dry nozzle has been locked.
- Set the wind speed to “1”, then set the temperature of the wind to “Cool ”. Finally, set your hair according to your own particular preferences.
Notes
- Oscillating quick-dry nozzle may not function properly at low power mode “1”.
- Illustrations are translucent here for easier understanding.
About nanoe™
What is nanoe™?
(nanoe™, generation method: high voltage discharge) nanoe™ is generated by collecting the available moisture in the air, so depending on the usage environment, nanoe™ may not be generated. In environments of low temperature and low humidity, moisture in the air becomes difficult to collect. When this occurs, negative ions are generated. nanoe™ are ions wrapped in water that are invisible to the human eye.
How nanoe™ works
Generally hair have properties which make it easy to become positively charged with electricity. These properties attract strongly negatively charged nanoe™ which penetrates the hair with moisture. Furthermore, they make the hair slightly acidic, tighten cuticles and keep your hair strong, elastic and healthy.
Panel effect
When nanoe™ continues to strike hair, hair becomes negatively charged. As a result, the nanoe™ and negatively charged hair repel each other, making it difficult for nanoe™ to reach hair. With the nanoe™ Charge System, by just gripping the panel together with the handle, the negative charge accumulated on hair is released. Because of this, nanoe™ continues to penetrate into hair, supplying moisture and thoroughly moistening down to the tips of hair.
Maintenance of the hair dryer
Always turn the power switch off and disconnect the plug from the household outlet. (Except when performing maintenance on the air outlet)
Maintaining the main body
Do this when dirty
To clean the hair dryer (when it is dirty), soak a cloth in the soapy water and squeeze it out firmly, then wipe with the cloth.
Notes
- Do not use substances such as alcohol, nail polish remover or detergent (hand soap). Doing so may result in malfunction or part cracks or discoloration.
- Do not leave the appliance with hairdressing products or cosmetics on it. Doing so will cause deterioration of the plastic, leading to discoloration and cracks.
Maintaining the nanoe™ outlet
Use commercially available cotton swabs. (We recommend the thin cotton swabs made for use with babies.)
- This maintenance allows the hair dryer to sustain the generated level of nanoe™ over a long period.
- Dampen the end of the cotton swab with tap water.
- A needle portion is located deep within the nanoe™ outlet. Using the swab, rub this portion gently about 5 times.
Maintaining the air inlet
- Clean the air inlet once a month or over.
- When dust etc. has built up, detach the filter from the hair dryer and remove the dust etc. using a toothbrush or vacuum cleaner.
- Use a commercially available toothbrush.
- Pull on the catch on the bottom side of the filter to detach.
- Remove any dust etc. adhered to the filter or air inlet grille.
- Remove the dust etc. adhered to the outside of the filter using a vacuum cleaner. If this does not remove the dust, use the thick part of your fingers to push the dust etc. through the fi ne mesh on the internal side towards the metal mesh on the external side, and scrub away carefully with a toothbrush.
- Using the toothbrush, carefully scrub away any dust etc. from the internal side of the filter.
- Using a vacuum cleaner or toothbrush, carefully remove any dust etc. adhered to the air inlet.
- Rubbing forcefully with your nails may tear the filter, so please use a toothbrush.
- Attach the filter securely, starting with the upper side.
- Keep pressing until you hear a “click” from both upper and lower catches.
Maintaining the air outlet
- The hair dryer should be plugged into the household outlet only in case of maintenance for the air outlet.
- Use a commercially available toothbrush.
- Switch the temperature selector to “Cool” and blow away the dust etc. as you scrub with the toothbrush.
- During maintenance, do not block the air inlet with your hands etc.
- Be careful when using the hair dryer for the first time after maintenance, since it may blow out dust etc.
Troubleshooting
Specifications
REFERENCE LINK
https://shop.panasonic.com/personal-care/hair-care-styling/hair-dryer/eh-na67-w
