Protoarc EKM01 Advanced Ergonomic Keyboard Mouse Combo User Manual
Product Features
2.4GHz Connection Steps
Mouse Bluetooth Connection Steps
Windows 10 OS (Mouse)
- Open “Setting” and find “Bluetooth Device” on the computer.
- Pairing is complete when it shows “ProtoArc EKM01 Connected*.
- Your computer will automatically search for “ProtoArc EKM01*, when this appears in the list, dick pair”
- Turn on “Assistive Touch”.
Android System (Mouse)
Complete Mouse Bluetooth Connection Steps 1, 2 and 3 before pairing.
- Open “Settings* and turn on Bluetooth function.
Keyboard Bluetooth Connection Steps
Windows 10 OSt(Keyboard)
- Open “Settings* and Click Bluetooth Devices.
- Choose “Add / Delete Bluetooth Devices”.
Mac OS (Keyboard)
Complete Keyboard Bluetooth Connection Steps 1, 2 and 3 before pairing.
- Find “System Preferences” on Mac.
- iOS (Keyboard) Complete Keyboard Bluetooth Connection Steps 1, 2 and 3 before pairing. 4 Open “Settings” and turn on Bluetooth.
Android System (Keyboard)
Complete Keyboard Bluetooth Connection Steps 1, 2 and 3 before pairing.
- Open “Settings* and tum on Bluetooth.
How to Switch Mouse Device Channels
After USB / Bluetooth 1 / Bluetooth 2 devices are connected, press the mode switch button on the left side of the mouse to switch between devices.
Mouse Charging
How to Switch Keyboard Device Channels
After switch between devices. are connected, press the corresponding channel key to
Keyboard Charging
When battery is low, the indicator light will starts to flash until the keyboard / mouse turns off, please recharge as soon as possible to ensure best user experience. Low battery may cause poor connection quality, resulting in delays or other problems while using. The power indicator light is red while charging and will turn green when fully charged. One full charge cycle takes about 2 to 3 hours.
Multimedia Function Button
Product Specification
Keyboard
Tips
- If keyboard fails to connect, switch the keyboard power OFF then turn it back ON, retry the Bluetooth connection procedures again. Clear the current Bluetooth connection list, remove current devices and then reconnect.
- To switch to a already connected channel, please wait for 3 seconds after pressing the switch device button for it to respond.
- The keyboard has memory function, when a keyboard channel is successfully connected, that channel connection will remain connected in the default channel. The corresponding indicator light will be on.
Sleep Mode
- When the keyboard or mouse stays idle for more than 30 minutes, it will automatically enters sleep mode and the indicator light will be off.
- To wake the keyboard and mouse, simply press any key on the keyboard and they will be ready within 3 seconds. The indicator light will turn on again.
What’s In Package
- 1 × Wireless Bluetooth Keyboard
- 1 × Wireless Bluetooth Mouse
- 1 x USB Receiver
- 1 × Type-C Charging Cable
- 1 x User Manual
DOWNLOAD PDF LINK
