Table of contents
show
Atrix Elite Series 2.4 Wireless Headset User Guide
Need Help?
Have any questions or comments? Need help getting set up? Contact us at https://care.gamestop.com
What’s Included
- Elite Series Wireless Headset
- 2.4Ghz Dongle
- USB-C to USB-A Charging Cable
- 3.5mm Aux Cable
LED Indicators
- Headset Indicator Flashes Blue – Unpaired
- Headset Indicator Rapid Flashing Blue – Pairing
- Blue light will be constant – Paired
- Headset Indicator Solid Red – Charging
- Microphone LED Solid Red – Microphone Muted
Pairing the Headset
- Hold the power button on the headset for 3 seconds to turn it on and off.
- The headset will automatically pair with the included 2.4Ghz dongle when it is plugged into your console
Charging the Headset
- Plug the USB-C end of the charging cable into the headset
- Plug the USB-A end of the charging cable into a UL compliant power supply of at least DC 5V 350mA.
- A full charge requires approximately 4 hours.
- The red light will turn off when charging is complete.
PS5 Setup
- Plug the 2.4Ghz receiver into the USB port located on the front of your console and power on the headset.
- You can also use the included 3.5mm Aux cable to connect by plugging the headset into the controller.
- Enter the settings menu > Devices > Audio Devices.
- Set input and output device to USB Headset
- Change “Audio Output to Headphones” to “Chat Audio
- Set headphone volume level to your desired setting.
- Select the microphone level and follow the prompts to adjust your desired settings.
PS4 Setup
- Plug the 2.4Ghz receiver into the USB port located on the front of your console and power on the headset.
- You can also use the included 3.5mm Aux cable to connect by plugging the headset into the controller.
- Enter the settings menu > Devices > Audio Devices.
- Set input and output device to USB Headset
- Change “Audio Output to Headphones” to “Chat Audio
- Set headphone volume level to your desired setting.
- Select the microphone level and follow the prompts to adjust your desired settings.
XBOX Series X/S Setup
- Use the AUX cable to plug the headset into the controller.
Note: Not all controllers will have a 3.5mm audio jack.
- Enter the System Menu > Audio
- Set Headset Volume to your desired setting.
- Set Mic Monitoring to your desired setting.
XBOX Series X/S Setup
- Use the AUX cable to plug the headset into the controller.
Note: Not all controllers will have a 3.5mm audio jack.
- Enter the System Menu > Audio
- Set Headset Volume to your desired setting.
- Set Mic Monitoring to your desired setting.
XBOX One Setup
- Use the AUX cable to plug the headset into the controller.
Note: Not all controllers will have a 3.5mm audio jack.
- Enter the System Menu > Audio
- Set Headset Volume to your desired setting.
- Set Mic Monitoring to your desired setting.
PC Setup
- Plug the 2.4Ghz receiver into an audio enabled USB port on your PC and power on the headset.
- Set audio input and output to USB connected device.
- If you’re having problems make sure the USB device is selected for default communications in sound control settings.
Switch Setup
- Use the AUX cable to plug the headset into the switch.
- The switch must be used out of the dock in handheld mode to use the audio jack. Adjusting The Mic
- The microphone is adjustable and can be extended or pushed back into the headset.
- To adjust the microphone pull it out of the ear cup, do not pull too hard to avoid damaging it.
Audio Setup
- For 71 enhanced audio driver use the qr code or navigate to http://www.gemstindyours.com/atrix-wireless-headset and download the zip file. Then follow the easy steps:
- Extract the zip file contents to a folder on your computer
- Plu your ea set into your P
- Run the ‘Setup.exe’ and follow the prompts.
REFERENCE LINK
