Prohear-EM037-Bluetooth-Hearing-Protection-Ear-Muffs-FEATURE

Prohear EM037 Bluetooth Hearing Protection Ear Muffs User Manual

Prohear-logo

Prohear EM037 Bluetooth Hearing Protection Ear Muffs User Manual

Prohear-EM037-Bluetooth-Hearing-Protection-Ear-Muffs-IMG

Key Features

  • Bluetooth 5.0 Technology, allowing you to enjoy hands-free calling and wireless music.
  • Built-in rechargeable battery and USe charging cord included.
  • Noise Reduction: NRR 2508, SNR 3018.
  • Deep Bass & Truy Stereo
  • Never power off, get infinite playtime via the 3.5mm audia port.
  • Premium Padded Headband & Breathable and comfortable ear cushions.

Product Overview

Prohear-EM037-Bluetooth-Hearing-Protection-Ear-Muffs-Fig1

Basic Operation

Charging the Headset: Built-in 1100mih rechargeable battery. When you need to charge, you could use the charging cable(Included) to connect PROMEAN 057 headset and insert it into a USB charger (Car charger, power bank, computer USB, etz) While charging, the LED will be red, When charging is complete, that will change to build blue.

Low Battery Warning

When the battery is less than 20%, this beaning protector will also provide “Low Battery ” voice prompts lasting 20 minutes and once every 1 minute. Please change the headset at this time, if not, this headset will automatically turn off to protect the headset.

Fitting the Headset:

  • Fully extend the headband and place cups over ears.
  • Adjust the headband by siding the headband up or down.
  • Do; Secure nar cushions over the ear for a firm seal.
  • Don’t: Allow hair to obifract the ear or the earmutt’s secure fit in any way.
  • Don’t: Allow the ear cups to sit crooked or askew over the ear.

Bluetooth Operation

  • Power On/Off the Headset: Press and hold Assist will announce “Power ON” or “Power OFF.”)
  • Bluetooth Pairing:
  • Turn Bluetooth on your device.
  • Select “EM037” to pair. for 3 seconds to power ON/OFF headset. (Voice
  • Once connected successfully, you will hear “Bluetooth Connected”.
  • The next time you switch the headset on, it automatically connects to the last connected device, and voice assist will announce “Bluetooth Connected”. (For some devices, you still need to manually connect again)
  • Long press for 6 seconds to re-pair the new device. (The LED will be blink blue at this time)
  • Listen to music:
  • Start the music app on your device.
  • To play and pause music, Short press the .
  • To go to the previous track or go to the next track, Short press or .
  • To adjust volume: Press and hold on or .
  • Take Calls: Incoming Calls In Bluetooth Mode, incoming phone calls will cause the music to be muted. There’s a ringtone in the headset when a call comes on (If the phone is in silent mode during a call, so is the headset).
  • To answer a call, single press .
  • To end a call, long press for 3 seconds
  • To reject an incoming call, long press for 3 seconds.
  • To redial (last call), tap twice quickly ; To hang up, long press for 3 seconds.
  • Adjust Volume:
  • To increase volume, Long Press and hold on ;
  • To decrease volume, Long Press and hold on .

Audio Input Mode

Connect Device: You could use an included 3.5mm stereo audio cable to connect the 3.5mm audio port of the headset and insert it into your device to get infinite playtime.
Control device: Use the native controls on the device to control input volume, pause/play, select tracks, and take calls)

Warranty

PROHEAR provides 3-YEAR-WARRANTY. And we take customer satisfaction as our top priority. If you have any questions, suggestions, concerns, or issues, please feel free to contact us: support@proheartac.com, Our friendly customer service team will respond within 24 hours.

REFRENCE LINK

www.prohear.eu

Leave a Reply