Table of contents
show
JBL EON ONE PRO Professional Loudspeakers User Manual
LISTENING CONFIGURATIONS
CHARGE THE UNIT
- Confirm the Power Switch (J) is in the OFF position.
- Connect the power cord to the Power Receptacle on the rear of the speaker.
- The Battery Level Meter (L) will illuminate, indicating the unit is charging.
- The unit is charged when the Battery Level Meter (L) is fully illuminated when powered on or off.
PLUG IN THE INPUTS
- Turn the Channel Volume Controls (F) and Master Volume Control (N) all the way to the left before connecting any inputs.
- Connect your device(s) via the input jacks provided.
If CH1 – CH4 inputs are being used, select MIC or LINE via the Mic/Line Button (E). - If connecting instruments directly to inputs 3 – 4, engage the Hi-Z button (Q).
POWER ON THE UNIT
Flip on the Power Switch (J); the Power LED (K) and the Power LED on the front of the speaker will illuminate.
BLUETOOTH AUDIO
This device supports Bluetooth audio streaming. To connect your device:
- Turn on Bluetooth on your source device.
- Press the Bluetooth Pair Button (O).
- Find JBL EON ONE PRO on your device and select.
SET OUTPUT LEVEL
- Set the Channel Volume Controls (F) to 12 o’clock.
- Slowly turn the Master Volume Control (N) to the right until the desired volume is reached.
- Fine-tune the Channel Volume Controls (F) for the desired mix balance.
- Enjoy your audio!
REFERENCE LINK
DOWNLOAD LINK
JBL EON ONE PRO Professional Loudspeakers User Manual
