Bass Jaxx EP-0681 Clique True Wireless Earbuds User Manual

Bass Jaxx EP-0681 Clique True Wireless Earbuds User Manual

Product Overview

Clique True Wireless Earbud
Portable Charging Case

1. On/Off Button/ Play/Pause Music Answer/End Call
2. LED Indicator
3.  Micro USB Charging Port

Protective Stickers ( on the bottom side )

Package Contents

1(One) Pair Earbuds / 0.8 in. x 0.8 in. x 1.11 in. (2.03 cm x 2.03 cm x 2.83 cm) each
1(One) Portable Charging Case 2.59 in. x 1.57 in. x 1.41 in. (6.57cm x 6.57cm x 3.59cm)
1(One) Charging Cable 11.8 in. (30cm)

Specifications

Driver Diameter:  10 mm
Impedance:  32 Ohms
Frequency Response:  20 Hz – 20 KHz
Sensitivity:  98 dB +/- 3 dB
Power Supply:  Li-ion Battery 3.7V 35 mAh Per Earbud
Playtime:  >10 Hours
Charging Time:  <2 Hours
Bluetooth Range:  32.8 Feet
Charging Case Battery Capacity:  500 mAh

Power On/Off

Power On
Press and hold down the On/Off Button of earbuds for 3 seconds and the LED will flash.

Power Off
Press and hold down the On/Off Button of earbuds for 4 seconds and the LED will turn off.

Pair the wireless earbuds with your mobile device

1.  Keep the distance between the earbuds and mobile device within 32.8 feet.
2.  De-activate the Bluetooth function on your mobile device.
3.   Take both earbuds out from charging case and wait for 3 to 5 seconds for auto pairing. The earbud has indicator blinking in Red/Blue quickly.
4.  Activate the Bluetooth function on your mobile device and select “CLIQUE TWS” from the list shown.
5. After pairing is successful, both earbuds LED will be slowly blinking.

Reconnect the wireless earbuds to your mobile device
When powered on, the wireless earbuds will automatically connect with the last successfully paired device.

Disconnect the wireless earbuds from your mobile device
Power off the wireless earbuds; or Switch off the Bluetooth on your mobile phone; or Leave the earbuds 60ft away from your mobile phone or further

Answer / Reject a call

When receive a call, press the On/Off Button once ( on either earbud) to accept the call, or answer the call normally via your mobile phone. Press and hold 2 seconds to reject it.

End a call
To end the call, just press On/Off button at any side of earbud with Beep sound to end it.

Functions
Pause / Play Music: Short Press on On/OFF Button
Go back to previous song: Double click left on/off button

Charging your Earbuds

1. Open the charging case cover.
2.  Remove the protective stickers between earbuds and charging case.
3.  Insert the Earbuds into the charging case.
4.  The earbuds will start the charge automatically.

Recharge Charging Case

1.  Use the Micro USB charging cable provided with the packaging.
2.  Connect the Micro USB plug to Micro USB charging port on the charging case, then connect the USB plug to a USB port on a computer or wall adapter to begin charging.
3.  The RGB LED on the charging case will be on and start changing color during charge.
4.  Once fully charged, the RGB LED will stop changing color and remain on .
5. The Red LED will be on during earbuds is charging and will be off after fully charged.

NOTE:

•  You must select a qualified charger from a regular manufacturer.

FAQ

If the wireless earbuds cannot be paired with your device, please try the following:
Ensure that your earbuds are in pairing mode or reconnection mode Ensure that Bluetooth search function of your mobile device is activated.

If the wireless earbuds will not turn on:
Make sure the earbuds are fully charged. Make sure the protective stickers are removed from the Earbuds

Can I change the battery for the earbuds and the charging case?
The wireless earbuds and the charging case use a built-in non-detachable battery which cannot be removed.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2.  This device must accept any interference received, including interference that may cause undesired operation.
3.  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

DOWNLOAD PDF

Bass Jaxx EP-0681 Clique True Wireless Earbuds User Manual

REFERENCE LINK

https://www.bassjaxx.com/