Giantex EP24403 Full-Automatic Washing Machine User Manual
Before You Start
Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. Always place the product on a flat, steady, and stable surface. Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
Welcome to our website and purchase our quality products! Your suggestions and comments for COSTWAY are really important to us! We sincerely solicit you to go back to our shop and leave a good rating with just a simple click. It would be quite encouraging if you could kindly do so like below: * * * * * Great products so far February 24. 2019 Great products so far. With fast delivery, easy setup, and working without any issues with your inspiring rating, COSTWAY will be more consistent in offering you an EASY SHOPPING EXPERIENCE. GOOD PRODUCTS and EFFICIENT SERVICE! US office: Fontana, California UK office: Ipswich
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You must read them carefully before installing or using the appliance.
PARTS NAME
Accessories
SPECIFICATIONS
PARTS NAME
Give an alarm
USE OF DETERGENT
- Put the detergent powder into the tub as the right figure
- Then close the wash lid.
- We suggest using sudsing detergent powder.
How to use the washing powder
- Dissolve in the machine directly (not suitable for delay program)
- Low water level.
- Add the washing powder, and run for 30 seconds to dissolve it completely.
- Put laundries in, and select a suitable water level.
- The instant dissolving of the washing powder
- Prepare warm water of 86°F in a container.
- Pour the powder while stirring to fully dissolve it.
- The washing powder is more prone to pollute the laundries than the detergent, therefore, please use it with proper quantity.
- Washing powder with poor quality or not used for a long period may get blocked, please clean the detergent box in time.
How to use bleach
- Fill the water to the selected level, dilute the bleach in the container, and pour it slowly into the washing tub.
- Do not use bleach for colored or figured laundries as they are prone to lose colors.
- Do not put bleach in laundries directly.
- Refer to the manual for the usage and quantity of the bleach.
- Please dissolve powder bleach before use.
How to use softener
- Put the softener into the softener box before the machine runs (turn the inner tub to find the softener box at the balance ring as shown in the figure), please turn the inner tub to have the softener box on the right side or left side, and then put into the softener. The softener will auto-put into an inner tub when the machine runs the wash.
- After putting it into the softener, please don’t lay it up for too long a time, otherwise, the softener will solidify, and result in the softener can not smoothly flow. When the machine spins, please don’t press the “start/pause” button, otherwise the softener will be put into machine at early, and affect the softener effect.
- When choosing a rinse/spin program or above two times of rinse/spin, please don’t use a softener, otherwise the softener will be put into the machine early and affect the softener effect.
- When using the high-concentration softener, please deliquate it before use.
- For the quantity of the concentrated washing powder, please refer to its manual.
- Remarks: avoid splashing of water and waste of washing powder, water level should not be too high if laundries are too small.
LOAD LAUNDRIES
- The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition . The washing quantity shall be lower than the rated capacity.
- Different thicknesses, sizes, and types of laundry will influence the actual washing capacity. It is suitable that the laundries can be turned around normally during washing.
- Don’t select a high water level when laundries are less than 2.2 LBS to avoid water splashing.
Reference weight of the laundries
Imbalance adjustment
During spinning, if the laundry is not placed equally in the tub, it would cause violent vibration. This machine has an imbalance adjustment function, and the vibration testing system will supervise the running. Once the vibration is beyond a certain level, the adjustment system will start automatically to adjust the imbalance.
The power supply is cut off automatically
- If do not press START/PAUSE in 10 minutes after pressing POWER, the power supply will cut off automatically.
- Once washing is finished, the power supply will cut off automatically.
Child lock function
When the machine running, press the buttons “water level/spin” and “program/delay” at the same time for 3 seconds to set the child lock function, and then the LED display “CL”, press the buttons “water level/spin” and “program/delay” at the same time above 3 seconds again to cancel the child lock. And the machine will back to display the remaining time. Once the child lock functions, all buttons are locked(including the power button).
If the top door is opened when the machine is running, the machine will stop running and the error alarm, the LED display “E5” and flash, if the door is closed within 5 mins after opening, the machine will stop the error alarm and continue to work. If the machine door is opened for more than 5 minutes, the machine will drain water until recover water level. During this time, the error alarm will sound 10 seconds every 10 minutes to warn the machine has an accident, at then, closing the top door is not useful.
One key spin function
When powered on, and press “power on/off”, the machine will be on standby(not press “start/pause”, a long time press “water level/spin” above 3 seconds, and the one key spin function will start, and the spin program will run as “09”, that is fast to switch for “spin” program and start to run.
CAUTIONS
Please insert the plug into the power socket with the rated voltage 110V A/C.
Always unplug the appliance and turn off the water when the power is cut, moving or cleaning the washing machine, or it is not in use. Do not insert or pull off the plug with a wet hand.
Do not make the electric cable bent, stretched, twisted, strapped changed, pressed, or nipped. If the electric cable or plug is damaged or the socket becomes loose, it must be repaired or changed by our appointed repair stations or the professionals of our post-sale service department to avoid danger. The pin of the plug must remain clean. Please clean it carefully with a dry cloth if it is dirty.
Don’t install the washing machine in a bathroom or damp places, Do not wash the machine with water, and do not put wet clothes on the control panel film.
Do not use water hotter than 122°F.
If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.
Do not wash raincoats, bike covers, feather dresses, and such waterproof laundry, which will make the washing machine abnormal vibrations during spinning.
Do not share the same socket with other electric appliances. Do not use the damaged plug or loose socket.
PREPARATION BEFORE OPERATION
Preparation before washing
- Connect the inlet hose and open the tap.
- This appliance must be earthed. Confirm the socket is earthed reliably and insert
- tuer drain parth terminal should not link to a gas pipeline, lap pipeline, etc.
Warning: the temperature of the water should be less than 122°F!
Before washing the laundry, please pay attention to the following:
- A. Make sure the laundries are washable.
- B. It is essential to wash new colored items separately when washing for the first time. White items should not be washed with colored items.
- C. Please immerse the non-absorbable laundry by hand.
- D. Some stains such as fruit, wine, grass, rust, etc. are difficult to remove and should be treated before washing with specific products, which can be found in most household shops. In some cases, it may help to soak the stain before washing with a special pre-soak product or biological detergent.
- E. Overturn the nap fabric and long floss laundries before putting them into the machine.
- F. Do not put the laundries polluted by chemicals into the machine directly.
- G. Very small items (handkerchiefs, ribbons, socks, etc) should be washed in a washing bag or a pillowcase.
Do not put your hands into the working machine. It is dangerous even if the speed is very slow. Take special care of the children, and forbid them to climb on the washing machine.
It is dangerous to alter the specifications or attempt to modify this product in any way.
Do not overload the appliance or put any hot goods(such as the kettle with hot water)on the washing machine.
Garments that have been in contact with volatile petroleum products should not be machine-washed.
Which replied crystal sensory or mental capabilities, or lack drain experience and knowledge. Unless they have been given supervision or instruction concerning the use of the appliance by a person children should be supervised to ensure that they do not play with the appliance.
Keep the appliance away from direct sunlight and heat sources like the heater
To prevent the lint from blocking cascade outlet during washing, please keep the lint filter in good condition, install it to proper position and clean it in time.
Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into to the machine
- Before washing, please ensure the tap is open and the inlet hose is installed properly.
- It is suggested to use low-foam washing powder.
Settlement
Notes: If is dangerous to rear this product by your lease pull out the plug and contact the seller right away.
PARTS NAME
Before contacting the technicians. please make the following checks:
HOW TO USE DRAINPIPE
MAINTENANCE
After the end of the programme
- The machine stops automatically, and the music buzzer will remind you to take out the laundry or start again.
- Once you have finished using the machine, you are advised to unplug it and turn off the water taps to avoid unexpected leaks or fires.
Clean inlet gate
It is possible that the inlet filter net can be blocked by the dust, please clean it according to the following steps:
- Close the tap and turn the power switch.
- Start the washing machine for 5 seconds/make the water.
Clean the lint filter
- It is necessary to use a lint filter during washing.
- After washing, please clean the lint filter in time.
Clean the lint filter according to the following steps:
- Pull out the lint filter. (see Illustration 1)
- Open the lint filter and wash it. (see Illustration 2)
- Close the lint filter and install it in the proper position.
OPERATION STEPS
- Press the power switch, put through power, and the machine is in the state of the beginning:
- Press the “program/Delay” button to select the proper program.
- Select the appropriate water level according to your laundry quantity.
- At the power on initial status, if want to choose delay wash, long press the button
“program/delay” above 3 seconds to set delay wash time. Press the button one time, and the flashlight will flash, and the display figure will stand for the program over time. If want to cancel the delay wash, press the “power on/off” button to back standby status. - At the power on initial status, long press the button “water level/spin” above 3 seconds to choose the spin function.
- When closing the top door press the “start/pause” button to run the machine, at the same time press “water level/spin” and “program/delay” above 3 seconds to set the child lock, press the buttons “water level/spin” and “program/delay” at the same time above 3 seconds again to cancel the child lock. Once the child lock functions, if the top door is, the machine will stop running and an error alarm.