Jlab Epic Air Sport Wireless Earbuds![Jlab -Epic -Air -Sport -Wireless -Earbuds-prodect](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIzMDAiIGhlaWdodD0iMjgyIiB2aWV3Qm94PSIwIDAgMzAwIDI4MiI+PHJlY3Qgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgc3R5bGU9ImZpbGw6I2NmZDRkYjtmaWxsLW9wYWNpdHk6IDAuMTsiLz48L3N2Zz4=)
FIRST TIME SETUP
AUTO-CONNECTING EARBUDS
- Take earbuds out of the charging case and remove stickers.
- Press and hold both Power Buttons 2+ seconds to turn ON.
Left earbud turns solid white and Right earbud blinks blue/white indicating ready to pair to your device.
CONNECTING TO BLUETOOTH
Select “Jlab Epic Air Sport” in your device settings. Voice prompt “Bluetooth connected” followed by solid white lights will indicate you are connected.
ADDING NEW / ADDITIONAL BLUETOOTH DEVICES
Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from new device. Take earbuds out of the case. Earbuds will automatically enter Bluetooth Pairing. Select “Jlab Epic Air Sport” in device settings to connect
IN THE BOX
EARBUDS
EARTIPS
CHARGING CASE
CONTROLS![Jlab -Epic -Air -Sport -Wireless -Earbuds-fig-6](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIzMDAiIGhlaWdodD0iMTAzIiB2aWV3Qm94PSIwIDAgMzAwIDEwMyI+PHJlY3Qgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgc3R5bGU9ImZpbGw6I2NmZDRkYjtmaWxsLW9wYWNpdHk6IDAuMTsiLz48L3N2Zz4=)
![Jlab -Epic -Air -Sport -Wireless -Earbuds-fig-7](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIzMDAiIGhlaWdodD0iMTA4IiB2aWV3Qm94PSIwIDAgMzAwIDEwOCI+PHJlY3Qgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgc3R5bGU9ImZpbGw6I2NmZDRkYjtmaWxsLW9wYWNpdHk6IDAuMTsiLz48L3N2Zz4=)
![Jlab -Epic -Air -Sport -Wireless -Earbuds-fig-8](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIzMDAiIGhlaWdodD0iMTQ0IiB2aWV3Qm94PSIwIDAgMzAwIDE0NCI+PHJlY3Qgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgc3R5bGU9ImZpbGw6I2NmZDRkYjtmaWxsLW9wYWNpdHk6IDAuMTsiLz48L3N2Zz4=)
VOICE PROMPTS
- “Hello”: Power ON
- “Earbuds joined”:
- Earbuds paired to each other
- “Ready to Pair”: Epic Air Sport are
- ready to pair to Bluetooth device
- “Bluetooth Connected”:
- Earbud is connected to device
- “Battery Full”: 100-80%
- “Battery Medium”: 80-20%
- “Low Battery”: Less than 20%
- When power decreases to 10%,
- “Low Battery” will play
- “Goodbye”: Power OFF
EQUALIZER MODES
Triple tap left earbud for different EQ settings. Voice prompts will indicate EQ settings (Epic Air Sport will cycle 3 EQ settings)
AUTO-POWER ON / OFF
- Placing the earbuds in the charging case will power OFF earbuds and start charging. Blue lights indicate earbuds are charging and will turn OFF when fully charged.
- When earbuds are taken out of the case, they will auto power on and reconnect to your device
CHARGING CASE
Connect the Epic Air Sport to computer or USB 5V 1A (or less) output device.
FITTING![Jlab -Epic -Air -Sport -Wireless -Earbuds-fig-13](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIzMDAiIGhlaWdodD0iMTAzIiB2aWV3Qm94PSIwIDAgMzAwIDEwMyI+PHJlY3Qgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgc3R5bGU9ImZpbGw6I2NmZDRkYjtmaWxsLW9wYWNpdHk6IDAuMTsiLz48L3N2Zz4=)
QUICK TIPS
The Bluetooth connection is established from the right earbud. For the most stable connection, keep the device near right hand side or in right pocket. If you prefer to wear only one earbud, you must wear the right earbud as this is the main earbud connected to Bluetooth. Choosing the correct ear tip makes a significant improvement in audio quality due to the proper seal for the driver. Test all ear tips for best results. Only ONE Bluetooth device can be connected at a time. Turn off Bluetooth on unwanted devices and turn on Bluetooth on chosen device to connect.
WARNING
Fully dry off the earbuds before placing in the charging case. If the earbuds are damp or wet, this will cause damage to the charging case. The warranty will be voided if the charging case shows damage by water/sweat.
Do not deform the ear hooks. The ear hooks are a flexible silicone but also have an internal hard structure for the antenna. Prying on the ear hook may break or damage the antenna.
TROUBLESHOOTING
Connection failure or earbuds disconnected from each other (Manual Reset)
- Keep the earbuds in the charging case and forget “JLab GO Air” from your Bluetooth device settings.
- Quick tap 7x on one earbud in charging case. Earbud blinks blue 3 times.
- Quick tap 7x on other earbud in charging case. Earbud blinks blue 3 times.
- Take both earbuds out of the charging case.
One earbud will be solid white and other will blink blue/white indicating ready to pair to your device.
CAUTIONS
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the earbuds.
- Wax may build up in the earbud tips, lowering the sound quality.
- Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
- If you experience regular discomfort while using this product, discontinue use and consult your physician.
- We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.
YOUR WARRANTY
All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact
Download Pdf Link
https://cdn.shopify.com/s/files/1/0240/9337/files/Epic_Air_Sport_Manual.pdf?v=1584734296