Elite-Gourmet-EPM-250-Classic-Countertop-Kettle-Popcorn-Maker-User-Guide-Feature-Image

Elite Gourmet EPM-250 Classic Countertop Kettle Popcorn Maker User Guide

Elite-Gourmet-EPM-250-Classic-Countertop-Kettle-Popcorn-Maker-User-Guide-Image

Elite Gourmet EPM-250 Classic Countertop Kettle Popcorn Maker User Guide

Elite-Gourmet-EPM-250-Classic-Countertop-Kettle-Popcorn-Maker-User-Guide-Image-1

IMPORTANT SAFEGUARDS

  1. Do not touch hot surfaces. Always use handles or knobs to operate.
  2.  To protect against risk of electrical shock, do not immerse cord, plug, or any non-removable parts of this appliance in water or other liquid.
  3. Close supervision is necessary when any appliance is used by or near children.
  4.  Unplug from outlet when not in use and before cleaning. Allow to cool before installing or removing parts. To disconnect, grasp plug and remove from outlet. Do not pull by the cord.
  5.  Do not operate the appliance if the power cord or plug is damaged, it must be replaced by the manufacturer or its service agent before use. Return appliance to the nearest service facility for examination, repair or adjustment.
  6.  The use of any accessories or attachments not supplied by the manufacturer is not recommended as it may cause injuries.
  7. Do not use outdoors.
  8.  Do not pop kernels in a dry kettle (without oil).
  9.  Do not use butter/margarine when popping kernels. This will burn the popcorn and leave a residue.

SHORT CORD PURPOSE

NOTE: A short power cord is provided to reduce the risk of personal injury resulting from becoming entangled in or tripping over a longer cord. Longer power-supply cords or extension cords are available and may be used if care is exercised in their use.

PARTS & IDENTIFICATION

Elite-Gourmet-EPM-250-Classic-Countertop-Kettle-Popcorn-Maker-User-Guide-Image-2

  1. Clear plexi door for convenient viewing
  2.  1/3 Measuring Cup (80 mL) & 1 Tablespoon (15 mL or ½ Fluid Oz.) pre-measured
  3.  Removable popcorn tray easily slides out for serving popcorn. (DO NOT wash in dishwasher)
  4.  Stainless steel 2.5o z popping kettle prepares freshly popped popcorn in minutes
  5.  Main Popcorn Unit
  6. Steel Hangers hold the popcorn kettle securely and allow kettle to swing freely.

BEFORE FIRST USE

Before using your appliance for the first time, be sure to:

  1.  Remove all packaging and labels or stickers from your popcorn maker. (You may want to keep the box and packing materials for use at a later date.)
  2.  Make sure that the appliance is unplugged and the switches are in the “OFF” position.
  3.  Wipe housing and internal chamber of main unit with a damp cloth to remove any dust. Wash the accessories (measuring cup, tablespoon & tray) in hot, soapy water. Clean the internal surface of the kettle with warm soapy water, rinse well and dry with clean cloth. (NEVER IMMERSE THE KETTLE IN ANY LIQUIDS).
  4. Thoroughly dry all accessories and follow instructions for assembly.

ASSEMBLING YOUR POPCORN MAKER

Step 1:

Elite-Gourmet-EPM-250-Classic-Countertop-Kettle-Popcorn-Maker-User-Guide-Image-3Hook the kettle onto the hanger inside the main popcorn unit.

Step 2:

Elite-Gourmet-EPM-250-Classic-Countertop-Kettle-Popcorn-Maker-User-Guide-Image-4Insert the kettle as power plug into the electrical socket on the inner ceiling of the main popcorn unit.

Step 3:

Elite-Gourmet-EPM-250-Classic-Countertop-Kettle-Popcorn-Maker-User-Guide-Image-5

Set the removable tray in the Main Popcorn unit below the kettle.

Step 4:

Elite-Gourmet-EPM-250-Classic-Countertop-Kettle-Popcorn-Maker-User-Guide-Image-6Place the door onto the hinges by aligning the pins on the main popcorn unit with the hinges on the door.

USING YOUR POPCORN MAKER POPPING INSTRUCTIONS

  1. Make sure the popcorn maker is unplugged before you begin.
  2.  Before using the unit, please check to be sure voltage (120V ~60Hz) is suitable to your home.
  3.  Main popcorn unit has 2 function switches.
  4. Install popping kettle by hooking the kettle onto the kettle hooks inside the main popcorn unit (see step 1 on page 4).
  5. Insert the internal kettle plug into the socket on the ceiling inside the main popcorn unit. (see step 2 on page 4)
  6.  Plug the external power cord into an electric wall outlet.
  7.  Before pouring oil or kernels into the kettle, lift lid using the lid tab. Add oil (1 tablespoon of vegetable, corn, peanut, or coconut oil).
  8. Turn both LIGHT & POP switches to ON position. The light, heater and motor will be on. Allow the kettle to preheat oil for approximately 2 to 3 minutes. Turn the POP switch to off position, add 1/3 cup of corn kernels close lid to the kettle. Close the plexi-door. Turn POP switch back on, stirrer will begin to rotate and heater will heat up the oil and corn.
  9. Popcorn starts popping out through the lid after approximately 2 minutes.
  10.  When unit is finished popping – you will no longer hear the corn popping – immediately turn the POP switch to the OFF position and pull down the handle bar of the kettle to release any remaining popcorn in the kettle. This will also stop the remaining popcorn from cooking any further and prevent burning.
  11. Repeat steps 8 through 10 for continuous popping.

CLEANING AND MAINTENANCE

  •  It is strongly recommended to clean the kettle after EVERY use.
  •  NEVER IMMERSE THE KETTLE IN WATER OR ANY LIQUIDS.
  • Do not use benzene, scrubbing brushes or chemical cleaners, as these will damage the kettle.
  • After using the popcorn machine, allow it to cool, and use a warm damp cloth to clean the interior chamber windows of the main unit after each use to prevent build-up.
  • It is strongly recommended to wash and dry the popcorn tray, measuring cup and spoon after each use. (Do NOT wash in dishwasher.)
  •  The plexi door is removable by simply lifting it off its hinges. The door can be hand washed in warm soapy water. Do not use any abrasive cleaners, scouring pads, or steel wool.
  •  Do not clean plastic tray with any abrasive cleansers, scouring pad or steel wool.
  •  Light bulb is replaceable with an AC120V 10W bulb.

KETTLE QUICK CLEANING PROCEDURE

Turn the POP switch to off. Pour 4 to 6 ounces of water (NO detergent is necessary) into inner kettle popper. Switch POP to on to boil the water and let the stirrer turn in order to remove excess oil or kernels stuck inside the kettle. Leave on for approximately 1-2 minutes. Shut off and let cool. After cooling, pour out the water and discard.

CAUTION: THE KETTLE MAY BE HOT. You may also remove the kettle and clean it with a non-abrasive scouring pad (Not included). NEVER immerse kettle or electrical plug in water or other liquids.

LIMITED WARRANTY

  1. Your small kitchen appliance is warranted to the original purchaser to be free from any manufacturing defects under normal use and conditions for one (1) year, cord excluded. This Warranty applies only to the original purchaser of this product.
  2. Retail stores/merchants selling this product do not have the right to alter, modify, or in any way revise the terms and conditions of the warranty.
  3. If you use your appliance for household use and according to instructions, it should give you years of satisfactory service.
  4.  At its sole discretion, Maxi-Matic USA will either repair or replace the product found to be defective during the warranty period.
  5.  The repaired or replacement product will be in warranty for the remaining balance of the one-year warranty period and an additional one-month period.
  6.  Consumer’s remorse is not an acceptable reason to return a product to our Service Center.
  7. This warranty does not apply to re-manufactured merchandise.

REFERENCE LINK

https://shopelitegourmet.com/

Leave a Reply