Epomaker TH68 Sea Salt Switch Keyboard User Manual
WINDOWS
- FN + 1 F1
- FN + 2 F2
- FN + 3 F3
- FN + 4 F4
- FN + 5 F5
- FN + 6 F6
- FN + 7 F7
- FN + 8 F8
- FN + 9 F9
- FN + 0 F10
- FN + – F11
- FN + = F12
- FN + J Insert
- FN + K Home
- FN + ,< End
- FN + U PrtSc
- FN + I Scroll Lock
- FN + O Pause
- FN + WIN Lock/Unlock Win Key
MAC
- FN + 1 Screen Brightness –
- FN + 2 Screen Brightness +
- FN + 3 Task
- FN + 4 Siri
- FN + 5
- FN + 6
- FN + 7 Previous Track
- FN + 8 Play/Pause
- FN + 9 Next Track
- FN + 0 Mute
- FN + – Volume –
- FN + = Volume+
FUNCTION KEY COMBINATIONS
- FN + ESC (HOLD 3S) Reset the Keyboard
- FN + ESC (SHORT PRESS) `
- FN+SHIFT+ESC ~
- FN + B Battery Check
- FN+SPACEBAR (HOLD) Check Layer & Mode
- FN + Z/X/C/V Switch among the Layers 1/2/3/
- FN + Q Short Press to Switch to BT1; Long Press to Pair Devices
- FN + W Short Press to Switch to BT2; Long Press to Pair Devices
- FN + E Short Press to Switch to BT2; Long Press to Pair Devices
- FN + R Short Press to Switch to 2.4G Mode; Long Press to Pair Devices
LIGHT EFFECTS
- FN + BACKSPACE Turn On/Off Backlights
- FN + DEL (SHORT PRESS) Toggle RGB Effects
- FN + DEL (HOLD 5S) Record RGB
- FN + PGDN Toggle RGB Colors
- FN + PGUP Toggle Side Lights
- FN + ↓ Backlights Brightness
- FN + ↑ Backlights Brightness +
- FN + ← Backlights Speed –
- FN + → Backlights Speed +
PAIRING BLUETOOTH
Turn on the switch on the back of the keyboard to make sure that the keyboard is under wireless mode:
- Hold Fn+Q/W/E for 3-5 seconds till the indicators flash fast in red/blue/yellow, and the keyboard is ready to pair.
- Turn on your Bluetooth device and find ‘Acrylic68’, then connect. When the keyboard is connected to the Bluetooth device, the light on the Q/W/E key stops flashing and the connection is done.
- Press Fn+Q/W/E to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHZ
- Press Fn+R to the 2.4Ghz mode, and then hold Fn+R for 3-5 seconds till the light flashes fast in green, and the keyboard is ready to pair.
- Insert the 2.4G dongle into your R device, the R key stops flashing green and the connection is done
WIRED MODE
Press Fn+T till the key lights white, and the keyboard enters the wired mode.
CHECK BATTERY
Hold Fn+B, and the keys from 1! to 0) light up to show the battery percentage; for example, if the keys from 1! to 6^ light up when holding Fn+B, it means that the battery life is currently 60%; if the keys of 1! -0) light up, battery life is 100%.
CHECK LAYER AND MODE
Hold Fn+Spacebar, the indicators of Z/X/C and 1/2/3/4/5 light up to show at which layer and which mode the keyboard is; for example if the keys of X and 3 light up when holding Fn+Spacebar, it means that the keyboard is in layer 2 and under the wireless mode and connected to BT3 device.
SPECS
REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Note:
If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process. Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email support@epomaker.com with your purchase order number and a detailed description of your issue. We normally respond to inquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store Epomaker, please contact them directly for any additional help.
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker. We provide a 1-year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1-year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc. We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.
