Panasonic ER-CTW1 Multifunctional Trimmer User Manual

Panasonic ER-CTW1 Multifunctional Trimmer

Important information

Apply the lubrication oil to the blade before and after each use. Failure to apply the lubrication oil may cause the following problems. The appliance has become blunt.

Parts identification (Fig. 1)

(A) Head

1.  Water inlet
2.  Trimming height indication mark
3.  Dial (Height adjustment control)
4.  Water outlet
5.  Blade

(B) Comb attachment [A]
(1 mm to 10 mm)
(C) Comb attachment [B]
        (11 mm to 20 mm)
(D) Comb attachment [C]
(21 mm to 30 mm)
(E) Comb attachment for body hair [D]

How to use

•  Clean the appliance after use.
  1. Mount the head to the main body until it clicks.
  2. Mount the desired comb attachment and adjust the trimming height as needed.
•  It can also be used without the comb attachment.
  (Trimming height: approx. 0.5 mm)
  3. Turn on the power.

Note:
The use time after a full charge is as follows.
ER-CBL1: 70 minutes
ER-CBN1: 40 minutes
(Based on dry using at 20 °C – 30 °C)
The operating time may differ depending on the frequency of use and the operating method.

Removing and mounting the head (Fig. 2)

Remove the head while pushing the head release button (a).

•  Stand the head when it is removed.
  Mount the head to the main body until it clicks.

Removing and mounting the comb attachment (Fig. 3)

Remove the comb attachment from the head. Mount the comb attachment to the head until it clicks.

How to clean

•  Make sure that the main body is turned off .
•  Lubricate after cleaning.

To remove light dirt

1.  Remove the comb attachment, run water down the water inlet. (Fig. 4)
2.  Shake up and down several times to remove the water.
3.  Wipe off the water with a dry cloth and dry it well.

To remove heavy dirt

1.  Remove the head, comb attachment and blade and rinse them with running water
2.  Shake up and down several times to remove the water.
3.  Wipe off the water with a dry cloth and dry it well.

Removing and mounting the blade

To remove the blade, hold the head, place your thumb against the blades and then push them away from the head. (Fig. 5-1)
To mount the blade, fi t the mounting hook ( ) into the blade mounting on the head ( ) and then push in until you hear a click. (Fig. 5-2)

Replacement parts

Blade: once every three years.

Replacement part is available at your dealer or Service Centre.

Lubrication (Fig. 6)

1.  Apply a drop of the lubrication oil to each indicated point.
2.  Attach the blade to the head, turn on the power and allow it to run for approximately 5 seconds.

Troubleshooting

Problem

The appliance has become blunt.

Makes a loud sound

Action

Until problems are solved, please follow each procedure as follows;

1.  Clean the blade and apply lubrication oil.
2.  Replace the blade.

If the problems still cannot be solved, contact your dealer or a service center  authorized by Panasonic for repair.

Specifications

This product is intended for household use only.

Panasonic Corporation
https://www.panasonic.com
© Panasonic Corporation 2022

Dwonload Pdf Link

https://manuals.plus/m/5354750b2724f5d46ae216feaa0fe973b45498a79f3e64ee8a0d6fdae7725429_optim.pdf