BOBOT ET29 Portable Speaker with Microphone User Manual
Packing List
Button Function
- Power Indicator
- Volume down / Previous song
- Karaoke mode switch and light on/off
- Play/pause
- EQ mode
- Power
- Volume up / Next song
- Type-c Slot (charge only)
- TF card Slot
- AUX Slot (3.5mm Audio jack)
- USB Slot
- RST (Reset Slot)
Button Function description
| Button | Key Operation | Function Description |
|
| Short press | Increase the volume |
| Long press | Next song | |
 | Short press | Short press to switch between BT/AUX/USB/TF card mode |
| Long press | Press and hold for 3 seconds to turn on/off | |
 | Short press | Short press to switch Indoor/Outdoor mode |
|
| Short press | Play/Pause |
| Long press | Disconnect BT | |
|
| Short press | Decrease the volume |
| Long press | Previous song | |
|
| Short press | Karaoke mode/Vocal mode/KTV mode |
 | Double click | Light on/off |
How To Use The Speaker
Wireless BT connection
- Short press
button, the speaker enters the BT mode, and the blue light of the power button icon flashes quickly to enter the pairing state, and search for your BT device named”Bobtot ET29″ and tap to connect - When switching to BT mode again, you can double-click the
button to play the song.
TF card/U disk/Aux-in mode
- Insert the TF card into the card slot or insert the U disk slot, and the Bobtot ET29 portable speaker will automatically play music (The max capacity is 64Gb for a TF card or U disk, it can be recognized by the speaker)
- Connect any audio device with a 3.5mm cable for playing
How to Use Microphone
Turn On/Off
When the ET29 speaker is on, press the button of the microphone for 2 seconds to turn on, the indicator light is green, which is automatically connected to the ET29 speaker, and you can sing the song now. Press for 2 seconds to turn it off.
Volume Up/Down
Short press microphone – / + to reduce/increase the microphone volume.
Adjust the Mode
When you are singing the song, short press the button in the ET29 speaker, and you can switch to karaoke mode, vocal mode, or KTV mode to enjoy different scene sound effects.
Charging
Plug the USB Type-C into the charging port of the microphone, the indicator light is red. When the microphone is fully charged the red light will be off. Full charge of the battery is about 1-2 hours. Note: The ideal distance between the microphone and the ET29 speaker is 10 meters
Specifications
| Describe | Specifications | Describe | Specifications |
| Model Name | Bobtot ET29 | Charging Voltage | 5V2A |
| Transmission Distance | 10m（Open Field） | Charging Time | 4-6H |
| Peak Power Output | 60W | Frequency Response | 60hz — 18Khz |
| Local Decoding | Support MP3/FLAC/APE/WMA | Waterproof Level | IPX7 |
| Speaker Size | 2*66mm | BT Version | Wireless 5.1 |
| Product Size | 250*104*104mm |
Kindly reminder
- Please keep the microphone at least 20cm away from the speaker.
- Please check the charger specifications before charging, do not use fast charging or high-voltage chargers to charge the speaker.
- For hearing health, please do not use it at maximum volume for a long time.
- Do not use it near a fire source or in a high-temperature environment to avoid permanent damage to the speaker.
- Please use it strictly following the instructions, and do not modify or disassemble the product without permission.
- Do not drop, impact, knock, squeeze, or other behaviors that seriously affect the product structure to avoid damage to the strength and reliability of the product.
- If you encounter high temperature, deformation, corrosion,, and other abnormalities during use, please stop using it immediately and contact the merchant for proper disposal.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against tharmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used following the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
