Eufy Video Baby Monitor 720P User Manual
WHAT’S IN THE BOX
Note: Power adapter varies by region.
FEATURE INTRODUCTION
Monitor Features
- Screen 6 LED indicator
- Menu button • Red: charging
- Navigation button • White: Fully charged
- OK button
- Micro USB charging port
- Press to confirm the selection
- Press to switch camera display if you have added more than 1 camera
- Volume down
- Volume up
- Return to previous level of menu / Talk 10 Power button button
- Zoom button
- Press and hold to speak to the camera
- When menu is opened, press to return the previous level of menu
- Reset
- Speaker
Camera Features
- Microphone 5 Pairing button
- Standard camera lens 6 Micro USB port
- LED indicator 7 Speaker
- Temperature sensor
SETTING UP THE CAMERA AND MONITOR
Charge the Monitor
Fully charge the monitor before use. To charge:
- Connect one end of the micro USB cable to the baby monitor, and the other end to the power adapter (5V/2A).
- Plug the adapter into a power outlet.
- Press and hold the power button for 2 seconds to turn the baby monitor on.
Charge the Camera
- Connect one end of the micro USB cable to the baby camera, and the other end to the power adapter (5V 1A).
- Plug the power adapter into a power outlet.
- The new baby monitor and camera will set up automatically. You are all set to use the products after the monitor and camera are fully charged.
ADDING A NEW BABY CAMERA TO THE BABY MONITOR
The baby camera and baby monitor are paired and ready to use right out of the box. Refer to the following steps when adding extra baby cameras or after resetting a baby camera.
- Enter menu settings, go to Camera -> Add Camera, then follow the onscreen instructions to start the pairing.
- Press and hold the pairing button on the rear of the camera for 1 second until a notification prompt is heard.
- Check the firmware version of the monitor (see image below) to make sure your baby monitor and camera are running the same, latest firmware version.
To check whether it is the latest version:
- Visit the website below: https://www.eufylife.com/support/5505/spaceview-baby-monitor
- If the firmware version is lower than the version shown online (highlighted in green), click the firmware version to download. The downloaded file includes firmware for both T8300 and T8321 models, make sure you use the T8321 firmware.
- Follow the steps in the “eufy Security Software Upgrade Guide” video or Firmware Upgrade Manual to complete firmware upgrade.
Note:
- The eufy Security Spaceview baby camera can be added to the monitor. Before adding the camera, make sure Space View baby camera is running the same, latest version with the monitor’s.
- Chrome OS is not supported for firmware upgrade.
- Before you upgrade firmware, use the provided micro USB cable (1m) to connect the device needed to your computer.
USING THE BABY MONITOR
When 2 or more cameras are added to the monitor, you can manually switch among cameras by pressing the monitor’s OK button. Once the camera switch is completed, the icon of the selected camera will appear on the corner of the baby monitor. You can also select the “Cycle Camera” option. The screen cycles through the list of connected baby cameras according to the preset intervals.
Note: The monitor will emit a loud noise if placed too close to the camera. This is normal and is resolved once the camera is moved away from the monitor.
MOUNTING THE BABY CAMERA ON THE WALL
- Place the wall mount against the wall, matching the direction as UP indicates. Mark the screw holes with a pencil.
- Drill 5” holes into the wall and then insert anchors into the holes. Anchors are not needed for wooden walls.
- Insert the screws through the mounting holes of the wall mount and screw into the anchors.
- Snap the baby camera onto the wall mount.
- To get the optimal viewing angle, rotate the camera (25°upwards, 60° backwards, 250° horizontally) manually, as pan and tilt functions are not supported on this model when using the navigation button
MONITOR MENU SETTINGS
Press and hold the power button to power on the monitor. Press the menu button to open Menu Settings.
Menu Settings
Note: The interval duration between each sound alert is 30 seconds. It will not sound alerts during this interval, even if the conditions are met to trigger an alert. 4 06 : 12 AM
On-screen Menu Icons
NOTICE
Warning
Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1m (3ft) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: www.eufylife.com This product can be used across EU member states. Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited. The adapter shall be installed near the equipment and shall be easily accessible.
This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.
DOWNLOAD PDF LINK
