Ion Audio Explorer FX Bluetooth Speaker With Sound Effects User Guide
Important Safety Instructions
- Read and keep these instructions. Heed all warnings and follow all Instructions.
- Water and Moisture: This product should be kept away from direct contact with liquids.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions similar unit, and maintain good ventilation conditions.
- Do not defeat the safety purpose of the polarized or grounding-type plug (if applicable).
Outdoor Use and Care
- Explorer FX must only be used outdoors with power outlets or extension cords that are rated for outdoor use. Please do not connect the power cable to Explorer FX in a wet environment.
Rechargeable Batteries
- Charge the battery completely after each use. It is acceptable to leave Explorer FX plugged in; this will not overcharge the battery. Explorer FX does not need to be powered on to charge the battery.
- The battery icon blinking on the Display means that the battery is charging.
- If you leave the battery level low and do not charge it for 6 months, it may permanently lose capacity.
Features
- Power Button: This button turns Explorer FX on or off.
- Bluetooth Button: Press and release the Bluetooth button to pair to a Bluetooth device or disconnect a paired Bluetooth device. See below to learn more.
- Light Mode Button: Press this button to cycle through the four different light modes for Explorer FX’s multicolored button LEDs, or to turn the lights off.
- Link: Select which unit will be the primary speaker by pressing and releasing its Bluetooth button. Use this speaker for pairing with a Bluetooth device or selecting a radio station.
- Radio Selector: This button sets the radio to FM, AM, or turns the radio off.
- Tune/Track Buttons: Press and release these buttons to tune in a radio station or go to the previous/next track on a Bluetooth connected device. To “seek” hold either button down for a few seconds.
- Play/Pause / Preset: Press to play or pause a track from a connected Bluetooth device station. To save the current station as a preset, press and hold this button.
- Display: This screen shows information relevant to Explorer FX’s current operation.
- Volume Control: Press this knob to toggle between controlling the music volume and controlling the microphone volume. Turn the knob to increase or decrease the volume.
- Microphone Input: Connect a microphone to this 1/4” (6.35 mm) mono input.
- Auxiliary Input: This stereo 1/8” (3.5 mm) input can be used to connect a CD player, MP3 player, or other audio source.
- USB Charging Port: Connect your device’s charge cable here to charge it.
- Touch FX: Press this button to cycle between the FX modes for the pads. See below to learn more.
- Pads: Press these pads to trigger different sound samples, depending on the setting of the Touch FX button.
Pairing with a Bluetooth Device
- Press and release the Bluetooth button on the speaker.
- Navigate to your Bluetooth device’s setup screen. If your Bluetooth device prompts for a pairing code, enter 0000.
Using Touch FX
Press the Touch FX button to toggle between the five different FX modes, each with eight different fun sounds: Drum, DJ, Sport, Speech and Fun. Tap the pads to trigger each sound effect. Use the Drum and DJ effects to enhance your dance party, the Sport effects to fire up the crowd at the game, punctuate a toast with the Speech effects.
App Control
IMPORTANT: To ensure the best possible experience with the app, use the most current Android OS or iOS on your device.
Note: Ensure that your device has internet access via your service provider or wireless connection. Follow these steps to download the free app on your device:
- Open the Apple App Store or Google Play on your device.
- Follow the on-screen instructions to download and install the app.
Product Warranty
What is covered and for how long?
ION Audio warrants factory-refurbished merchandise to be free of material and operational defects for a period of ninety (90) days from the original date of retail sale. This refurbished merchandise warranty is not transferable.
What are ION Audio’s obligations?
ION Audio’s sole option, without charge to the purchaser, any defective component part of the product. To obtain service under this Limited Warranty, purchaser must first contact ION Audio.
What are the limits on ION Audio’s liabilities?
LIMITATION ANY WARRANTIES OF MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ION AUDIO SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL,
INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER’S PROPERTY, OR
INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY ION.
DOWNLOAD PDF
Ion Audio Party Rocker Effects Portable Bluetooth Speaker User Guide
