Table of contents
show
Sudio F2 Portable Speaker User Guide
Broadcast function:
- Turn on both F2 speakers by holding 2 sec, connect first F2 to device
- Hold 2 sec on the first F2
- Hold button 2 sec on other F2 to link
- End broadcast by pressing.
Charging
- Use USB-C to charge.
- Amber and white flashing light = charging.
- White light = charged
Factory reset
Hold button 10 seconds, the LED will flash white 3x and a tone will be played if successful
Included in the box
- F2
- Charging cable
- warnings folder
- Owner manual
Pairing to a device
- Hold 2 seconds to turn F2 on
- Lights will blink white/amber, connect to device
- Hold 2 sec to disconnect, F2
Battery indication
The LED lights amber when battery is between 0-25%, and white when between 26%-100%
Operations
Playback operations:
- Play and pause 1x click
- Volume up 1x click. ( +)
- Volume down 1x click (-)
- Next: track. 2x clicks { +)
- Previous track 2x clicks ( -)
Phone call operations.
- Accept calls: 2x click on the button
- Hang up or reject calls: Hold the button 2 seconds
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not all press approved by the party responsible for compliance could void the users authority to operate the equipment.
- Increase the separation between the equipment and receiver.
- connect the equipment into on outlet on a circuit different from that to which the receiver is connected.