Secrui F55 Wireless Door bell User Manual
Product Introduction
The wireless doorbell uses advanced wireless reception technology , high-quality voice processing technology , and integrates up to 32 musics. Suitable f or apartments, villas, storefronts, hotels, hotels, homes, buildings, conference
rooms, etc
Package
- Doorbell receiver(s)
- Transmitter button(s)
- Double sided adhesive tape( s)
- Warranty card
- Secrui Manual
Features
- 32 music’s optional
- Adjustable volume 5 level (including mute )
- Memory function, and the voice for each boot is the last shutdown setting.
- Dazzling colorful lights
Notes:
When the doorbell is in pairing state,short press any key on the doorbell receivers or leave it 20 seconds without an y operation, the doorbell will exit the pairing state.
Chime Setting
- Plug the doorbell in to the AC outlet, and the doorbell host beeps once, The LED indicates that the color light
cyclically, indicating that the doorbell is power on and working properly. - Trig the doorbell it play the voice means it is working normally
- Trig the button. The doorbell has no response, Please r e-match the doorbell and button.
- Short press: Loop tones in sequence and play the current tones.
- Long press: Change tones loop direction
Ordinary Doorbell And Button Pairing
Long Press 5S
Short press button
The doorbell will beeps twice, then press button again, the doorbell ashes once and beeps once means , match is done. if you need t o pair other doorbell buttons, please pair them in the same way.
Fixed Tone Setting
- Short press to select one tone, long press
- the doorbell beeps once, indicating that the pairing state is entered. then press the button, the
doorbell ashes once and beeps twice. - Press the button, doorbell ashed once and beeps once, it is done.
Long Press ﹥5S
Short press﹤1S
Tracks Return to The First Song
Press and hold the button to power on, the doorbell host will turn on after beeps sounds, indicating that the doorbell host will restore the track to the song, and all the buttons are not deleted.
Total Clearance
Press and hold the button to power on, the host “beeps, beeps” 10 sounds and the LED white light ashes 10 times quickly, indicating that all accessories are deleted, and the doorbell host returns to the factory settings.
Technical Parameters
- Working voltage: 100~240V 50 ~60Hz A C
- Stand by current: <3mA (220V AC)
- Working current: <11mA (220V AC)
- Wireless frequency: 433MHZ
- Wireless distance: 150m ( in open air )
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.