Table of contents
show
Amazon Fire TV Soundbar Speaker User Guide
In the box:
Front/Back
CONNECT TO YOUR TV
PLUG THE POWER CABLE INTO YOUR SOUNDBAR
Plug the included power cable into the sound bar’s power port and then a power outlet.
CONNECT YOUR SOUNDBAR TO YOUR TV IN ONE OF THREE WAYS:
- Plug the included HDMI cable into your TV’s HDMI ARC/eARC port and your sound bar. On the TV, make sure the HDMI CEC setting is enabled and audio settings are correctly configured.
- Unplug the HDMI cable if connected. Press and hold the Bluetooth button on the soundbar. The LED will blink in discovery mode.
- In the TV’s Bluetooth settings, select Fire TV Sound bar.
- Plug an optical cable (sold separately) into the sound bar’s optical port and then into your TV’s optical port. On
- Fire TV: Go to Settings> Equipment Control> Manage Equipment, to set up.
MOUNTING YOUR FIRE TV SOUNDBAR ON THE WALL
INCLUDED FOR WALL MOUNTING
- LEVEL AND TAPE TEMPLATE TO THE WALL: Using a level or level app, tape the template to the wall under your TV.
- DRILL HOLES AND INSTALL ANCHORS: If you are using the anchors, drill holes where the template says MARK HERE. After drilling both holes, remove the template and tap the anchors into the holes.
- SCREW IN THE WALL MOUNTING RINGS: Insert the included screws into the wall mounting rings and screw them into the anchors.
- MOUNT THE SOUNDBAR: Attach the soundbar to the wall mounting rings, making sure that the soundbar is locked into place.
