Jlab Flex Wireless Headphones
FIRST TIME SETUP: BLUETOOTH PAIRING
- Turn on the Bluetooth in your device settings.
- When the Flex Wireless Headphones are powered off, press and hold the Power Button for approximately 10 seconds. Voice prompts “Hello”. Once powered on, the headphones will automatically go into pairing mode. Fast blinking blue indicator light indicates searching for Bluetooth device
- Search for “Jlab Flex BT” on your Bluetooth device and connect. When the headphones are paired, voice prompts “You are connected” and blue indicator light will flash slowly.
RECURRING USE
Once Flex Wireless Headphones have initially paired to your device, they will auto-connect to your Bluetooth device when powered back ON. (Follow BUTTON FUNCTIONS instructions)
Notes:
• Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device. The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.). • Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future.
Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.
• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.
ACCESSORIES
CHARGING
Note: For optimum performance, charge overnight with Micro USB cable prior to using. Connect the Micro USB to the headphone and connect the USB into a computer or AC adaptor (not included). Make sure the USB connection has a power output source. Solid red light indicates the headphone is charging. When it turns off, charging is complete. Allow about 3-4 hours to fully charge.
HEADPHONE PORTS / BUTTON FUNCTIONS
WARM-UP YOUR HEADPHONES
Optional: Burn-in is the process for exercising new audio equipment. We recommend 40 hours of burn-in time for most headphones to reach optimal performance. The main purpose of the process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone driver. Normal, everyday use can also burn-in the headphones though JLab’s proprietary burn-in provides an ideal mix of sounds and frequency sweeps to achieve this.
Burn-in your audio equipment with the JLab Audio app available on the App Store and Google Play. Or access the burn-in method at: jlabaudio.com/burnin
TROUBLESHOOTING
Connection failure or earbuds disconnected from each other (Manual Reset)
- Keep the earbuds in the charging case and forget “JLab GO Air” from your Bluetooth device settings.
- Quick tap 7x on one earbud in charging case. Earbud blinks blue 3 times.
- Quick tap 7x on other earbud in charging case. Earbud blinks blue 3 times.
- Take both earbuds out of the charging case.
One earbud will be solid white and other will blink blue/white indicating ready to pair to your device.
CAUTIONS
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the earbuds.
- Wax may build up in the earbud tips, lowering the sound quality.
- Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
- If you experience regular discomfort while using this product, discontinue use and consult your physician.
- We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.
YOUR SATISFACTION IS GUARANTEED
YOUR SATISFACTION IS GUARANTEEDYou may exchange or return merchandise within 30 days of the purchase date. Learn more at jlabaudio.com/guarantee
YOUR WARRANTY
All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact
Download Pdf Link
https://cdn.shopify.com/s/files/1/0240/9337/files/Flex_Wireless_Manual.pdf?3948
