Table of contents
show
Flux Hexa Desktop Laser Cutter & Engraver User Manual
Safety Precautions
Please read the following safety precautions carefully before operating the HEXA. Since the HEXA generates a high-power laser, improper operation may result in fire, visual impairment, skin burns, inhalation of toxic substances, and other harmful or adverse health effects to person or property.
- Do not leave the HEXA operating unattended. Press pause if you need to step away.
- Do not stare at the light produced by the laser while the machine is cutting and engraving.
- Please confirm the material to be engraved will be safe to burn at high temperatures.
- Always have an accessible, functioning fire extinguisher in the work space.
- Do not disassemble the HEXA without prior authorization from FLUX.
Operators
- Confirm that users intending to operate the machine have read all safety precautions carefully and will follow the instructions in the manual.
- The repair or modification process can only be done by the authorized technician of FLUX. Repair by the user is not intended.
WARNINGS
- DO NOT modify the machine without official authorization.
- DO NOT let minors operate the HEXA alone.
- DO NOT disassemble the electrical cabinet to avoid the risk of electric shock.
Working Environment
- Place the machine on a level, stable surface, ensuring there is no overhang or tilt.
- Place the machine in a well-ventilated indoor space with windows. Do not place the machine outdoors, in the basement, under a metal roof, direct sunlight or in other confined spaces.
- Set the open end of the HEXA’s vent hose outside of a window.
- In case of rain or extreme weather, please stop using the machine and put the vent hose away indoors. Do not expose the machine to high humidity, splashing rain, or direct sunlight.
- Stored the machine at an ambient temperature between 5°C and 40°C and humidity between 10% and 70%.
- The HEXA should be operated at an ambient temperature between 5°C and 25°C (if the power is below 40%, the ambient temperature may be be relaxed to as high as 30°C).
WARNINGS
- DO NOT place any liquids or flammables near the machine.
- DO NOT let children play near the machine.
Door Safety Interlock
- When the cover is opened, the safety interlock will suspend the operation of the machine and stop the output of laser.
- Even if the machine is designed with the safety interlock, do not put your hands, eyes, or other parts of your body near the operating area of the laser to avoid danger.
WARNINGS
- DO NOT try to modify, defeat or disassemble safety interlocks.
Power and Wires
- Verify that the model you received is the correct voltage (110V or 220V).
- Ensure that the 3rd prong of the socket is grounded. An ungrounded circuit may cause static interference, affect performance, or increase the risk of electric shock.
- If the power cord is damaged, stop using the machine immediately.
- Always turn off the power and disconnect the plug before cleaning. Always turn off the power and disconnect the plug before cleaning and maintenance.
WARNINGS
- DO NOT bend, twist, pull, or put heavy objects on the cables or plugs. Keep cables and plus away from heat sources.
Fire Risk
- Regularly clean the debris under the honeycomb table of the machine.
- In case of fire, turn off the power immediately and unplug the power cord.
- Use a wet towel to extinguish the fire. Note: water may irreversible damage the machine.
- If the fire is relatively large, use a fire extinguisher. Note: the dry powder or foam from the fire extinguisher may cause irreversible damage to the machine.
- If the fire spreads, please call the fire department immediately for assistance.
WARNINGS
- DO NOT use the material that is not suitable for lasers to be placed into the machine from the “Material Tips – Hazardous Materials (p.121)” for more information.
- DO NOT try to cut multiple boards at once by stacking materials in the machine.
- DO NOT operate the machine unattended.
Ventilation
- Set the open end of the HEXA’s vent hose outside of a window or connect to an air purifier.
- If you detect strong odor or heavy smoke, please stop using the machine.
- Make sure the vent hose is properly connected and the ventilation system is working properly before use
Additional Operation Notes
- Have two or more people move the machine to avoid injury.
- Wearing gloves while cleaning honeycomb table or material to avoid being scratched.
- In case of burns, please flush with cold water and consult a doctor immediately.
- Wear a mask and laser safety glasses with the protection level of OD5 (energy penetration rate 10-5) when opening the cover.
- There are no noise hazard concerns as the HEXA’s working level is below 70 dB.
WARNINGS
- DO NOT stare at the light produced by the laser during operation.
- DO NOT impact or vibrate the machine. It may cause the optical path to shift or the laser tube to be damaged
- Do not place any living beings in the machine. It is strictly prohibited.
Work Position of Operator
Laser Safety
- To assess the potential hazards of laser systems, they are divided into eight safety classes: 1, 1C, 1M, 2, 2M, 3R, 3B, and 4. FLUX HEXA is a Class 1 Laser Product. A class 1 laser product is a device the safest of all classes and complies with laser safety standards from the International Electrotechnical Commission (IEC). These regulations ensure that lasers identified with a “Class 1 laser product” are safe.
- This is guaranteed by its enclosed protective housing and its safety devices.
- FLUX HEXA works with a laser source that emits intense and invisible laser light.
- If the door cover is opened during the task, the interlock ensures the laser stops.
- Safety interlock switches on the front panel turn off the laser immediately if they are opened. Do not place magnets near the front panel or doors as they can interfere with the switches. Do not try to defeat the switches.
- The accessible laser light is hazardous to the eye and the skin if the protective housing or interlock is defeated, modified or removed.
- Without protective devices, this direct light or diffused reflected light is dangerous to both persons and objects!
- Do not modify or disassemble your HEXA. Attempting to modify or service the unit may result in hazardous laser light exposure. All service must be performed only by factory-authorized technicians or only be modified with official authorization.
REFRENCE LINK
