Corsair DARK CORE RGB Gaming Mouse
CHARGING THE MOUSE – USB
IMPORTANT: The DARK CORE RGB PRO SE mouse must be fully charged before its first use. Connect the mouse to an available USB 2.0 or 3.0 port on your PC with the USB charging/data cable. The battery/wireless status LED indicator on the mouse will begin pulsing green to denote battery charging and will turn solid when charging is complete.
CHARGING THE MOUSE
DARK CORE RGB PRO SE mouse is Qi wireless charging compatible. It can be charged by placing it on the charging pad and aligning built-in wireless charging receiver module with the wireless charging transmitter on charging pad. The battery status LED indicator (I) will begin pulsing green to denote battery charging and will turn solid when charging is complete.
GETTING TO KNOW YOUR MOUSE
- A — LEFT CLICK BUTTON
- B — RIGHT CLICK BUTTON
- C — MIDDLE CLICK BUTTON
- D — PROFILE CYCLE BUTTON
- E — DPI UP BUTTON
- F — DPI DOWN BUTTON
- G — FORWARD BUTTON
- H — BACKWARD BUTTON
- I — BATTERY/WIRELESS STATUS LED INDICATOR
- J — INTERCHANGEABLE SIDE GRIP
- K — USB CHARGING/DATA PORT
- L — DPI/PROFILE STATUS LED INDICATOR
- M — OPTICAL GAMING SENSOR
- N — PTFE GLIDE PADS
- O — POWER/WIRELESS MODE SWITCH
- P — USB WIRELESS RECEIVER
- Q — USB CHARGING/DATA CABLE
- R — Qi WIRELESS CHARGING RECEIVER
SETTING UP 2.4GHz SLIPSTREAM WIRELESS
Hyper-fast sub-1ms wireless connection is designed for no-compromise gaming grade performance.
- Toggle power/wireless mode switch to “2.4GHz” position to turn on your mouse.
- Connect the USB wireless receiver to an available USB 2.0 or 3.0 port located on the front panel of your PC or nearby USB pass-through port (e.g. on CORSAIR MM800 and MM1000 mousepads).
- The battery/wireless LED indicator will turn solid white when connected.
- Download the iCUE software from www.corsair.com/downloads.
- Run the installer program and follow instructions for installation.
If reconnection is required, initiate USB wireless receiver pairing via the iCUE software settings menu.
SETTING UP BLUETOOTH® WIRELESS
Bluetooth® wireless is best for everyday computing tasks, productivity and office applications.
- Initiate Bluetooth® pairing on your Bluetooth® 4.0 or higher enabled device.
- Press and hold PROFILE CYCLE button.
- Toggle power/wireless mode switch to “BT” position to turn on your mouse.
- Follow the instructions to successfully connect your device.
- The battery/wireless LED indicator will turn solid blue when connected.
BATTERY/WIRELESS AND DPI/LED STATUS LED INDICATORS
- WEB: corsair.com
- PHONE: (888) 222-4346
- SUPPORT: support.corsair.com
- BLOG: corsair.com/blog
- FORUM: forum.corsair.com
- YOUTUBE: youtube.com/corsairhowto
© 2020 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. 49-002296 AB
Download Link
