GOURMIA GCM4225 15-Bar Espresso Maker User Manual

GOURMIA GCM4225 15-Bar Espresso Maker User Manual

Congratulations on the purchase of your Espresso Maker from Gourmia!

Here at Gourmia, our one and only goal is to make sure nutritious and delicious meals are always a practical possibility no matter how fast-paced your life is. Whether you’re in need of a hearty breakfast, a mid-day snack, or a satisfying supper, our dependable, easy-to-use appliances are designed to work for you while you work your way through your busy day.

This manual provides an overview and instructions on all the espresso maker’s functions and features, along with directions for assembling, operating, cleaning, and maintaining your appliance. Please read all safety instructions before getting started. Keep this manual handy for future use and review. Our team is available to help with any and every question you might have about your new espresso maker.

We’re excited for you and want you to get the most out of your purchase—so whether you need assistance with setup or guidance on which features to enable for which drinks, we’re happy to walk you through it, step by step. Happy and easy cooking! We’d love to hear about the delicious drinks you’re creating! Share your thoughts, recipes, and photos with us.

IMPORTANT SAFEGUARDS

When using electric appliances, basic safety precautions should always be followed:

1. Read all instructions.
2. This appliance is not intended for use by persons (including children younger than 8) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have supervision.
3. Check if the voltage indicated on the appliance corresponds to the local main voltage before you connect the appliance.
4. Do not use the appliance if the plug, the main cord, or the appliance itself is damaged. Always make sure that the plug is inserted properly into a wall outlet.
5. Do not operate any appliance with a damaged cord or plug, after the appliance malfunctions, or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment.
6. Close supervision is necessary when any appliance is used near children. Children should be supervised to ensure that they do not play with the appliance. Cleaning and user maintenance shall not be done by children unless they are older than 8 and supervised.
7. Do not let the cord hang over the edge of the table or counter or touch hot surfaces.
8. To protect against electric shock, do not immerse cords, plugs, or appliances in water or other liquid. Do not plug in the appliance or operate the control panel with wet hands.
9. Never connect this appliance to an external timer switch or separate remote-control system in order to avoid a hazardous situation. To disconnect, turn off the appliance, then remove the plug from the wall outlet.
10. Do not place the appliance on or near combustible materials such as a tablecloth or curtain. The accessible surfaces may become hot during use. Do not place on or near a hot gas or electric burner, or in a heated oven. 11. Do not place the appliance against a wall or against other appliances. Leave at least 4 inches of free space on the back and sides and 4 inches of free space above the appliance. Do not place anything on top of the appliance.
11. Do not use the appliance for any other purpose than described in this manual. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
12. Do not let the appliance operate unattended. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
13. Do not use outdoors.
14. Do not touch the hot surfaces; use a handle. During air frying, hot steam is released through the air outlet openings. Keep your hands and face at a safe distance from the steam and from the air outlet openings. Also, be careful of hot steam and air when you remove the pan from the appliance.
15. After using the appliance, avoid contact with the hot metal inside. Unplug from the outlet when not in use and before cleaning. Allow to cool before cleaning the appliance.
16. Immediately unplug the appliance if you see dark smoke coming out of the appliance. Wait for the smoke emission to stop before you remove the pan from the appliance.
17. Do not use the appliance for other than intended use.
18. Use extreme caution when removing the tray or disposing of hot grease.
19. Do not clean with metal scouring pads. Pieces can break off the pad and touch electrical parts, creating a risk of electric shock.
20. Oversized foods or metal utensils must not be inserted in a toaster oven as they may create a fire or risk of electric shock.
21. A fire may occur if the toaster oven is covered or touching flammable material, including curtains, draperies, walls, and the like, when in operation. Do not store any item on top of the appliance when in operation.
22. Extreme caution should be exercised when using containers constructed of anything other than metal or glass.
23. Do not store any materials, other than manufacturer-recommended accessories, in this oven when not in use.
24. Do not place any of the following materials in the oven: paper, cardboard, plastic, and the like.
25. Do not cover the crumb tray or any part of the oven with metal foil. This will cause overheating of the oven.
26. Turn off the appliance by rotating both Timer Dials to the OFF position.
27. For household use only.

ELECTRICAL POLARIZED PLUG

This unit has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, the plug is intended to be used by inserting it into the electrical outlet only one way. If the plug does not fit securely into the outlet, reverse the plug and re-insert. If it still does not fit, contact a qualified electrician for assistance. Do not modify the plug in any way.

• Power: 120V~ 60Hz 1,100W

KNOW YOUR ESPRESSO MAKER

CONTROLS

STEAM CONTROL KNOB 

BEFORE FIRST USE

• Remove and discard all packaging material and stickers that are not permanent.
• Remove the water reservoir, portafilter, single-shot filter, double-shot filter, and measuring scoop. Wash them with nonabrasive soap. Thoroughly dry and reinsert the parts. Wipe the exterior with a damp cloth.

PRIME THE ESPRESSO MAKER
Before first use, the appliance must run through an initial brew cycle with just water. Follow the directions below to prime the appliance:

1. Place the espresso maker on a stable, level, heat-resistant surface.
2. Fill the water reservoir up to but not exceeding the MAX line.
3. Place a heat-resistant mug or cup on top of the drip tray.
   NOTE: Ensure the steam control knob is set to the off position.
4. Plug the power cord into an outlet.
5. The single and double/manual buttons will pulse slowly as the appliance heats up. When heating is finished, all three buttons will illuminate steadily without pulsing. Only then is the appliance ready for use.
6. Press the single button. It will blink rapidly, indicating it is working. After 3-5 seconds, a small amount of water will dispense into the mug. The appliance will automatically return to standby mode when finished dispensing. NOTE: The appliance may make a loud noise when pumping water for the first time. This is normal and should stop after a few seconds.
7. Remove the cup from the tray and dump the water.

PREHEATING THE ESPRESSO MAKER
After priming the espresso maker, we recommend preheating the appliance for best results. NOTE: If there’s a large gap between the uses of the espresso maker, the appliance will enter hibernation mode. If this occurs, we recommend preheating the appliance before using it again. If using the appliance daily, it is ONLY necessary to preheat the appliance once before first use. Follow the steps under PRIME THE ESPRESSO MAKER. A small amount of water will be dispensed into the mug, indicating the appliance is ready for use.

MAKING AN ESPRESSO

1. Place the espresso maker on a stable, level, heat-resistant surface.
2. Fill the water reservoir up to but not exceeding the MAX line.
   NOTE: Ensure the steam control knob is set to the off position.
3. Place a heat-resistant cup or mug on the drip tray.
4. Plug the power cord into an outlet.
5. The single and double/manual buttons will pulse slowly as the appliance heats up. When heating is finished, all three buttons will illuminate steadily without pulsing. Only then is the appliance ready for use.
6. Align the single-shot filter or double-shot filter with the groove in the portafilter. For a single shot, use the single-shot filter. For a double shot, use the double-shot filter. Turn the filter to ensure it’s locked in place.
7. Use the measuring spoon to fill the filter up with ground coffee. Do not exceed the MAX line in the basket.
8. Use the tamper end of the spoon to press on the ground. The surface of the ground coffee should be smooth after pressing.
9. Clean any excess grounds from the rim of the portafilter.
10. Place the portafilter underneath the brew head with the handle facing toward the left.
11. Keep one hand atop the appliance to keep it steady while fastening the portafilter into the brew head. The handle must align with the open lock icon on the brew head.
12. Turn the handle to the right to lock the portafilter into the brew head. The handle must be aligned with the closed lock icon on the brew head.
13. Press either the single or double/manual button, depending on your preference. The button will blink during brewing.
14. For a single shot, the brew cycle will deliver 1 oz of espresso. For a double shot, the brew cycle will deliver 2 oz. of espresso. The appliance will automatically return to standby mode when finished dispensing.
15. Remove the cup from the drip tray and enjoy.

NOTE:
There is no need to manually turn off the espresso maker. The appliance will automatically turn off after 15 minutes of being in standby mode.

BREW IN MANUAL MODE

To customize your brew, follow the instructions below:

1. Set up the espresso maker to brew espresso as outlined.
2. Press and hold the double/manual button for 3 seconds. The button will remain illuminated without pulsing, indicating it is in manual mode. All other buttons will stop pulsing and turn off.
3. Once you’ve reached your desired amount, press the double/manual button again to stop brewing. The appliance will automatically return to standby mode when brewing is complete. NOTE: The appliance will dispense a maximum of 6.5 ounces in one cycle. NOTE: There is no need to manually turn off the espresso maker. The appliance will automatically turn off after 15 minutes of being in standby mode.

FROTH MILK

1. Fill up the water reservoir up to but not exceeding the MAX line. NOTE: Ensure the steam control knob is set to the off position.
2. Plug the power cord into an outlet.
3. The single and double/manual buttons will pulse slowly as the appliance heats up. When heating is finished, all three buttons will illuminate steadily without pulsing. Only then is the appliance ready for use.
4. Press the steam/water button. It will pulse slowly.
5. Fill a cup with the preferred amount of milk and position the cup under the frothing wand nozzle, making sure the frothing wand nozzle is below the surface of the milk.
6. When the steam/water button begins to blink rapidly, turn the steam control knob counterclockwise toward the on position to begin producing steam. Slowly rotate the cup and move it up and down to produce even froth.
7. When the frothing is complete, press the steam/water button. The appliance will stop frothing.
8. Keep the cup underneath the frothing wand for a few more seconds before turning the steam control knob clockwise to the off position.
9. Wipe the frothing wand to clean off any residue.
10. Pour the frothed milk into your drink.

USE STEAM WAND FOR HOT WATER

1. Fill up the water reservoir up to but not exceeding the MAX line. NOTE: Ensure the steam control knob is set to the off position.
2. Plug the power cord into an outlet. The single and double/manual buttons will pulse slowly as the appliance heats up. When heating is finished, all three buttons will illuminate steadily without pulsing. Only then is the appliance ready for use.
3. Place a large, heat-resistant cup or mug underneath the steam wand.
4. Turn the steam control knob counterclockwise toward the on position to open the frothing wand nozzle so water can be released.
5. Press and hold the steam/water button for 3 seconds then release. The button will illuminate steadily, and water will freely flow from the wand until the steam/water button is pressed again. NOTE: The appliance will dispense a maximum of
6. 5 ounces in one cycle.
7. When water has finished dispensing, the appliance will return to standby mode. Turn the steam control knob to its original off position.

CLEANING & MAINTENANCE

WARNING

• Always wait until the espresso maker shuts off, unplug the power cord from the outlet, and allow the appliance to cool before cleaning.
• Do not immerse the power cord, plug, or espresso maker in water or other liquid.

Clean all removable parts after each use.

PORTAFILTER AND BREW HEAD
Clean with warm soapy water and a non-abrasive sponge. INTERIOR Clean with warm, soapy water. Rinse and dry well. HOUSING Wipe the housing and steam with a damp cloth. Then wipe it dry with a soft cloth. Do not use harsh cleaning agents or metal brushes, in order to avoid scratching the surface. NOTE: Ensure the funnel is completely dry before first use.

DESCALING

After using the espresso maker for a while, limescale will begin to build up inside the appliance. It is important to describe the appliance every 2-3 months. If the espresso maker is used daily, the descaling process should be done monthly.

1. Mix equal parts vinegar and water and pour the solution into the water reservoir.
2. Insert the portafilter with an empty filter into the brew head.
3. Place a heat-resistant cup or mug on top of the drip tray.
   NOTE: Ensure the steam control knob is set to the off position.
4. Plug in the power cord. The single and double/manual buttons will pulse slowly as the appliance heats up. When preheating is finished, all three buttons will illuminate steadily without pulsing. Only then is the appliance ready for use.
5. Press the single button. The button will blink during brewing and will automatically return to standby mode when brewing is complete.
6. Press the double/manual button. The button will blink during brewing and will automatically return to standby mode when brewing is complete.
7. Press the steam/water button. The steam/water button will slowly pulse as it preheats, then illuminate steadily when ready for use.
8. Position the empty cup underneath the frothing wand nozzle, making sure the nozzle is below the rim. Slowly turn the steam control knob counterclockwise toward the on position and make steam for about 2 minutes to descale the appliance.
9. Once complete, press the steam/control button then turn the steam control knob to the off position and allow the mixture to sit inside the unit for about 15 minutes.
10. Place the cup underneath the brew head again. Press and hold the double/ manual button for 3 seconds, then release. Brew until no descaling mixture is left.
11. When the brewing process is complete, fill up the water reservoir with water and begin brewing again. This washes out any remaining vinegar.

NOTE: If an odor of vinegar persists, run another cycle with water.

STORAGE

• Unplug the appliance and let it cool down.
• Make sure all parts are clean and dry.
• Store the appliance in a clean and dry place.

ENVIRONMENT
Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.

GUARANTEE AND SERVICE
If you need service or information or if you have a problem, please visit www. Gourmia.com or contact your distributor.

WARRANTY & SERVICE

This Limited Warranty is for one full year from the date of purchase and requires proof of purchase from an authorized seller. It is applicable to the original purchaser only and is not transferable to a third-party user. Repair or replacement of defective parts is solely at Gourmia’s discretion. In the event that repair isn’t possible, Gourmia will replace the product/part. If product repair/replacement won’t suffice, Gourmia has the option of refunding the cash value of the product or component returned.

Product defects not covered under the Warranty provisions include normal wear and damage incurred from use or accidental negligence, misuse of instruction specifications or repair by unauthorized parties. Gourmia is not liable for any incidental or consequential damages incurred by such circumstances. Only valid within the United States. Register your product at www.Gourmia.com/warranty

REFERENCE LINK

https://www.gourmia.com/item.asp?item=10085