GE 24991 Universal Remote Control User Guide
Introduction
Congratulations on purchasing the GE Universal Remote! This remote eliminates the hassle of juggling multiple remote controls by allowing you to control various devices, including TVs, VCRs, DVDs, cable boxes, and satellite receivers. It is easy to use, program, and provides seamless control at your fingertips.
How to Set Up Your GE Universal Remote
Battery Installation
To ensure smooth operation, install two (2) AAA alkaline batteries into your remote:
- Open the battery compartment by pushing down the tab and lifting the cover.
- Insert the batteries, matching the (+) and (-) markings.
- Close the battery compartment securely.
Battery Precautions:
- Do not mix old and new batteries.
- Do not mix different types of batteries.
- Remove weak or expired batteries promptly and dispose of them properly.
Battery Saver Feature
Your remote automatically turns off if a button is pressed for more than 8 seconds, preventing battery drainage when stored in confined spaces like couch cushions.
Button Functions of GE Universal Remote
- ON/OFF: Powers devices on or off.
- VOLUME UP/DOWN: Adjusts volume.
- CHANNEL UP/DOWN: Changes channels.
- MUTE: Turns off the sound.
- INPUT: Switches between video input sources.
- RECORD, PLAY, STOP, REWIND, FAST FORWARD, PAUSE: Controls media playback.
- SETUP: Used for programming and code search.
- SHIFT: Access additional functions.
How to Program Your GE Universal Remote
Direct Code Entry (Recommended)
- Locate the provided Remote Code List in the manual.
- Turn on the device you want to program.
- Press and hold the Setup button until the red indicator light remains lit, then release it.
- Press the corresponding device button (TV, DVD, CBL/SAT, DVR/AUX).
- Enter the 4-digit code found in the code list.
- If the code is correct, the red light will turn off. If incorrect, it will flash, prompting you to retry.
- Test the device by pressing the Power button. If it turns off, the setup is complete.
Auto Code Search
If the direct code entry method does not work, follow these steps:
- Turn on the device manually.
- Press and hold Setup until the red light stays on.
- Press and release the corresponding device button.
- Point the remote at the device and press Power or Play (for DVDs/VCRs) to start auto search.
- When the device responds (turns off or starts playing), press the #1 button to lock the code.
- Test the remote to see if it functions properly.
Using Your GE Universal Remote
Master Volume Feature
This feature allows you to control the volume of a single device (TV or audio receiver) regardless of which mode your remote is in.
To enable Master Volume:
- Press and hold Setup until the red light stays on.
- Press the desired device button (TV, DVD, SAT, AUX) for volume control.
- Press Mute, then press Volume Up.
- The red light blinks twice, confirming activation.
To disable Master Volume:
- Press and hold Setup until the red light stays on.
- Press the currently programmed device button.
- Press Mute, then press Volume Down.
- The red light blinks twice, confirming deactivation.
Reset to Factory Settings
If your remote is not functioning as expected, resetting it can help:
- Press and hold Setup until the red light stays on.
- Press Mute, then press 0.
- The red light blinks twice, indicating the reset is complete.
Specifications
- Brand: GE (General Electric)
- Device Type: Universal Remote Control
- Compatible Devices: TV, DVD, Blu-ray, Streaming Players, Cable/Satellite Boxes, Sound bars, and other AV devices
- Programming Methods:
- Direct Code Entry
- Auto Code Search
- Number of Supported Devices: Varies by model (typically 2-8 devices)
- Power Source: 2 x AAA Alkaline Batteries (not included)
- Buttons & Functions:
- Power Button: Turns devices ON/OFF
- Volume Control (Up/Down)
- Channel Selection (Up/Down)
- Mute Button
- Input/Source Selection
- Media Playback Buttons: Play, Pause, Stop, Fast Forward, Rewind, Record
- Setup Button: Used for programming and code setup
- Shift Button: Provides access to secondary functions
- Additional Features:
- Master Volume Control
- Combination Device Programming (TV/DVD, TV/VCR, etc.)
- Reset to Factory Default
- Warranty: 90-day limited warranty (manufacturer coverage for defects)
- Manufacturer Support: Jasco Products
- User Manual Availability: Included in packaging and available online
Features of GE Universal Remote
Universal Compatibility
- Supports a wide range of devices, including TVs, DVD/Blu-ray players, streaming devices, cable/satellite boxes, and sound bars.
Multi-Device Control
- Controls up to multiple devices, reducing the need for multiple remotes.
Easy Programming Methods
- Direct Code Entry: Fast and straightforward setup using manufacturer codes.
- Auto Code Search: Automatically scans for compatible codes if the exact code is unknown.
Master Volume Control
- Allows volume control for a single device regardless of the active mode.
Shift Function for Additional Commands
- Access extra features such as menu navigation, input selection, and playback controls.
Ergonomic and User-Friendly Design
- Well-spaced buttons for easy navigation and a comfortable grip.
Battery-Powered for Portability
- Uses 2 AAA batteries (not included) with long battery life for extended usage.
Factory Reset Option
- Easily restore the remote to default settings if needed.
Durable Build Quality
- Designed for long-term use with sturdy material construction.
Troubleshooting Common Issues
Remote does not operate your device:
- Ensure the device button is pressed before controlling.
- Try a different programming code.
- Replace the batteries and reprogram if necessary.
- Check if the device is compatible with the remote.
Certain features do not work:
- Some codes may only enable basic functions; try other codes for better compatibility.
Red indicator light blinks but does not turn off:
- The code entered was invalid. Repeat the setup process using another code.
Remote is not responding correctly:
- Check if the remote is in Shift Mode by pressing the Setup/Shift button. For more troubleshooting tips, visit Jasco Products.
Final Thoughts
The GE Universal Remote User Guide simplifies the process of setting up and controlling multiple devices with a single remote. Whether you need to program your TV, cable box, or DVD player, following these steps will ensure a hassle-free experience. For more details, visit Jasco Products.
