Vsezund GE-G22 Rechargeable Shock Collar User Manual

Vsezund GE-G22 Rechargeable Shock Collar User Manual

Specifications

Warning

1. This product is only designed for training. Punishment or cruelty is prohibited.
2. Do not use it on aggressive dogs because they may have overreaction to cause hurt/injury to their owner or others. If you are unsure whether you can train your dog with our product, please consult a professional veterinarian or certified trainer.
3. It is not a toy. Keep the product out of reach of children. Only responsible family members can use it.

Caution

1. Please use the product when your pet is under control in a safe area.
2. Please use the product only on healthy dogs.
3. Your dog should be at least 6 months old. Your pet should be able to recognize basic obedience commands such as “Sit” or “Stay”.
4. Please wear the collar of your dog properly. Wearing too loose may cause bad contact while too tight may cause injury to the dog’s neck skin.
5. Please do not wear the collar for more than 10 hours a day for your dog.
6. If it is to be worn for a long time, please adjust the position or take the collar off every 2 hours
7. Please check the neck skin condition every day to avoid rash/soreness in time. If signs of skin discomfort are found on the dog’s neck, please stop using it and consult the veterinarian if needed.
8. Please do not tie another dog leash to the receiver collar.
9. When the collar is on, do not directly touch the contact probes.
10. When the product is not used for a long time, please charge it every
11. Please charge in time when it is in low power to avoid irreparable damage caused by over-discharge of the battery.

Components Name

1. Training Remote  1
2. Training Receiver (Collar)  1
3. Type C USB Charging Cable  1
4. Wrist Strap  1
5. Long and Short E-Shock Probes  2 Pair
6. User Manual  1
7. Test Unit & Probe Driver – 1

* The shorter E-Shock probe has been assembled on the collar.

Training Remote

1. Safety Keypad Lock
2. LED Screen
3. Vibration Intensity
4. Adjustment Mode
5. Vibrate
6. Вееp
7. Shock
8. Shock/Vibrate Level-
9. Shock/Vibrate Level+
10. USB Type-C Charging Port
11. Power
12. Receiver Channel

Introduction of Components

1. Buckle
2. Clasp Buckle
3. Adjustable Strap
4. Power/Pair Button
5. USB Type-C Charging port
6. E-Shock Probe
7. LED Light Indicator
8. Test Contact
9. Test Light

Main Features

Safe & Effective Training Modes
Beep Mode:
the tone is loud enough and the volume is fixed

Vibration Mode:
adjustable intensity with 1-8 levels

Shock Mode:
adjustable intensity with 0-18 levels

1. Easy Use: Independent large buttons, small-size remote, one-hand operation.
2. Soft & Skin-friendly: Soft & Durable Nylon Strap + Easy Clasp Buckle.
3. Wide Remote Range: The remote control distance range is up to 2600FT (the maximum effective range in barrier-free areas).
4. Support 3 Channels: You can train 3 dogs at the same time with 1 remote. (Note: additional receiver collars need to be ordered separately.)
5. Large Display Screen: The LED screen is large enough and all the information you need is clearly visible even in the sunshine.
6. Dual Battery Life Display: The battery information of both the remote and the receiver can look clearly on the display.
7. Safety Keypad Lock: Avoid mis-operation or accidental signal. Say goodbye to unexpected harm to your pet.
8. IPX7 100% Waterproof Receiver Collar: but the remote is NOT waterproof.
9. Rechargeable: rechargeable via the included USB Type-C charging cable by your PC/laptop/power bank. Time for Battery to Fully Charged: 1-2 Hours. (Note: Power adapter is not included in the package.)
10. Long Battery Life: Remote: 30 days; Receiver: 15 days (in full charge status)

FAQ

Is the static stimulation safe for my pet?
While the stimulation is unpleasant, it is harmless to your pet.

Why doesn’t the pet respond when operating the remote control?
There may be two reasons. First, beep and vibration are not enough to stimulate the pet; second, the collar is loose, and the strap needs to be tightened to make the contacts touch the skin.

Why do many similar products cause more serious sores on the dog’s neck?
This phenomenon is not caused by an E-Shock current, but a kind of “pressure necrosis”. The reason is that wearing the collar for a long time or even using the receiver collar as a matching collar, causes the receiver probes to compress or wear the skin for a long time, eventually leading to a severe sore. Please follow the wearing time requirements of the instructions and other related warnings.

General Training Tips

Important: Always start at the lowest level and work your way up.

• This set has 1 tone, 8 vibration levels, and 18 Shock levels, which allows you to choose a proper level for your pet. Please begin the training with sound and vibrating settings and the shock mode should always be the last to use. Please always start from the lowest level and slowly work your way up until the dog has a response. In most cases, vibration or shock levels 1-7 will be adequate for training. Once you wear the collar on your pet, find the “response level”, which is the stimulation level that your dog begins to notice and it should not make your pet uncomfortable.
• Follow the steps below to find your pet’s response shock level:

NOTE: 1. Please make sure the collar presses snugly on your dog’s neck. Both of the prongs must make full contact with the dog’s neck to form an electrical circuit. 2. Make sure the collar is fully charged and turned on. 3. Please check the shock mode with the included test light tool to ensure the shock function can work.

1. Choose level 1 and long-press the shock button for 2-3 seconds. A slight change in your pet’s behavior, such as looking around in curiosity, scratching at his collar, or flicking his ears, indicates this is the proper level for him/her.
2. If your pet has no reaction, repeat step1 several times before increasing it to a higher level.
3. Increase to level 2 and long press the Shock button for 2-3 seconds
4. If your pet still has no reaction, repeat several times before moving up to the next level.
5. Work your way up on the Shock levels until your pet gives the response.

Training skill

1. Please use the device in a safe and relatively quiet environment to increase the training effect and avoid temptation and distraction.
2. Please combine with oral language and gestures during training.
3. Please comfort your pet when he/she is uncomfortable during training.
4. Along with a Reward (a treat/a hearty rub/praise) as soon as your baby obeys the command, which is helpful for good behavior reinforcement you will get quick results. It will make your pet connect the collar with good things.
5. The training lime should not be too long. Please carefully control the time of static stimulation. If the pet feels uncomfortable(hiding or acting fearfully), you may decrease the level or stop using it.

FC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit of different

Recycling Information & Battery Disposal

Please observe the regulations for electronic and electrical devices to be disposed of in the respective country. In some countries or regions, this device must be recycled. If this device is no longer required, it must not be disposed of with normal municipal waste. A separate collection of spent batteries is required in many regions; check the regulations in your area before discarding spent batteries. For more recycling information, please refer to local regulations

The company declares under its own responsibility that this product complies with the basic requirements of CE (2014/ 30/EU) and RoHS (2011/65/EU). Without the approval of our company or the distributor, unauthorized changes or modifications to the equipment may violate the CE regulations, may cause the user to lose the right to operate the equipment, and invalidate the warranty

REFERENCE LINK