Ion Audio Geode Rock Wireless Speakers User Guide
GETTING STARTED
- REGISTER YOUR PRODUCT
- DOWNLOAD THE USER GUIDE
- SIGN UP FOR THE NEWSLETTER
PLUG IN TO FULLY CHARGE PRODUCT BEFORE USE, AND THEN POWER ON
IONAUDIO.COM/SUPPORT
For articles, videos, phone, web and chat support
IONAUDIO.COM/WARRANTY
For complete warranty information
Package Contents:
- Geode™* Rock Speakers
- (2) Micro USB Charging Cable (3.28 ft. / 1 m)
- Quick start Guide
ION SOUND CONTROL™ APP
Connect to the ION SOUND CONTROL™ App for a more dynamic experience:
- Connect phone to speaker via Bluetooth® (Step 4)
- Download App from Apple App Store or Google Play Store
- Open the App on your device
CREATE YOUR SOUND EXPERIENCE
BLUETOOTH
- Press and hold POWER to turn on, You will hear “Power On” and “Bluetooth Mode,” and the blue LED will flash.
- Choose “GEODE ROCK” in your Bluetooth settings menu. You will hear “Connected” and two beeps, and the blue LED will be lit solid of confirm bonnacon.
- Press Play in music player App of choice on device.
- Adjust volume using your Bluetooth device,
- To disconnect a Bluetooth device, turn off Bluetooth from your device’s Bluetooth settings. You will hear “Disconnected,” and the blue LED will flash.
AUTOMATIC WIRELESS STEREO-LINK™M
- Press and hold POWER to turn on the primary speaker.
- If you are not already connected, connect your Bluetooth device to the primary speaker using the directions above.
- Turn on the secondary speaker.
- Once the speakers automatically link, you will hear “Linked,” and the LEDs on both speakers will be solid blue.
- When audio is streaming from your device, it will play from both primary and secondary speakers.
OTHER FEATURES
EQ SETTINGS
Adjust EQ Settings using the ION SOUND CONTROL™ App to modify or enhance sound quality for any occasion.
SOLAR PANEL
- To get the most out of your solar panel, place the speaker in a location that gets direct sunlight all day.
- When the battery is low, the LED will illuminate red to indicate the speaker is charging from the solar panel.
- When the speaker is fully charged, the LED will be off, even if it is left in the sunlight.
WATER-RESISTANCE
- Your Geode™ Rock Speakers are water-resistant, but we encourages
- Taking the speaker indoors during heavy rains and snow.
- Avoiding leaving the speaker in sitting water or puddles.
Important Safety Instructions
- Read and keep these instructions. Heed all warnings and follow all Instructions.
- Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.
- Clean only with dry cloth.
- Water and Moisture (if applicable): Do not use this apparatus near water. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Electrical equipment should NEVER be kept or stored in damp environments.
- (If applicable) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install this equipment in a confined or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place exposed flame sources such as lighted candles on the apparatus.
- (If applicable) This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.
- (If applicable) Be careful not to damage the power cord. When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Only use attachment/accessories specified by the manufacturer.
- (If applicable) Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.
- Caution (if applicable): Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (a battery pack or an installed battery) shall not be exposed to excessive heat such as sunshine, fire, etc.
- (If applicable) Do not defeat the safety purpose of the polarized or grounding-type plug.
- Protective earthing terminal (if applicable): The apparatus should be connected to a mains socket outlet with a protective earthing connection.
- For Class II apparatus only: This symbol means the equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. When servicing use only identical replacement parts installed by an instructed person or with the use of ready-made leads or cords.
- Warning (if applicable): Provide an earthing connection before the mains plug is connected to the mains. When disconnecting the earthing connection, be sure to disconnect it after pulling the mains plug out from the mains.
- (If applicable) Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
- Warning (if applicable): To prevent possible hearing damage, do not listen at high volume levels for long periods.
- This apparatus is for professional use only. Intended operational climate: moderate.
Safety Notices
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
INSTRUCTIONS: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.
CAUTION (for U.S.A. & CANADIAN models only): TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
NOTICE CONCERNING LASER PRODUCTS: DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- reorient or relocate the receiving antenna;
- move this unit;
- increase the separation between the equipment and receiver;
- connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
- be sure that all cables are properly shielded, using a choke or ferrite where appropriate; or (f) consult the dealer or an experienced radio/television technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
DOWNLOAD PDF LINK
