Brass Monkey GH1680 Portable Dual Zone Freezer Guide

Brass Monkey GH1680 Portable Dual Zone Freezer Guide

FEATURES

• Dual Zone – Fridge / Freezer operation.
• Detachable lids – pivot point reversible
• DC power connection
• Power by AC using the AC to DC power adapter
• High-efficiency DC compressor and conversion module
• Dual mode operation (Max & Economy)
• Digital temperature display with adjustable control
• 3 Year Warranty
• 3-stage low voltage battery protection
• APP control Via Bluetooth

BOX CONTENTS

• 1 x Portable Dual Zone Fridge/Freezer
• 1 x Mains to DC Power Adapter
• 1 x 12/24V Car Cigarette Power Lead

SPECIFICATIONS

• Input Voltage: 12/24VDC, (To power from mains use the included 240VAC to 12VDC power adapter)
• Average Power Consumption: 90W
• Power Consumption: 0.3kw.h/24hr
• Rated Current for AC(Adaptor): 1.5A – 0.7A
• Rated Current for DC: 6.0A(12V)/3.0A(24V)
• Temperature Range: -20°C to +20°C (with ambient temperature at 25°C)
• Refrigerant: R134a
• Insulation: 100% CFC & HFC free PU Foam insulation

SAFETY

• The installation of DC power sources in a boat must be handled by a qualified electrician
• Make sure to connect power to the suitable voltage socket
• No electrical devices are to be used inside the product
• The product can be powered on only after being unpacked and put on a flat-level surface for over 6 hours
• Fridge operating angle:- The fridge can be operated indefinitely at up to 5 degrees, and can be operated at between 6 and 45 degrees for up to 30mins.
• The product must be well-ventilated. Ensure there is a minimum of 200mm clearance at the back, and 100mm around the sides
• The product should be in a well-ventilated space, away from heat sources. Try to avoid direct exposure to sunlight
• Keep product stable
• When there is water inside the tank, do not turn the product upside down to empty. Dry the water, do not soak it in water
• Do not put metal in the air inlet vent, outlet vent, or gap
• Do not connect with power except 12/24VDC, or the 240VAC to 12VDC power adapter (included)
• Do not soak the product in water or wash it with water
• The product should not be repaired. If there are any issues please consult the place of purchase
• Turn off the product before cleaning to avoid electric shocks or other issues.

OPERATION

How to Turn on the Fridge

1. Connect to power
2. Press to power on or off
3. The internal temperature will display and the compressor will start
4. SET: Press the button to enter different modes, ECO (Energy Saving Mode), and MAX (Fast Cooling Mode). Factory setting is Max
5. When the power is on and the dual temperature zone is set to valid, press the “+” or “-” button to enter the left zone temperature setting, and then press the button to switch the left or right box temperature setting. Press “+” or “-” to adjust the temperature.
6. In the power on state, long press the buttons “+” button and for 3 seconds to turn the left zone on or off, and press and hold the buttons “-” and for 3 seconds to turn the right zone on or off. Note: You cannot set both zones off at the same time.

COMPONENTS

USING IN CAR
The product has a three-level battery protection function, which not only guarantees the normal operation of the product but also protects the battery of the vehicle. When in the power-on state, long press button for 3 seconds, and the display screen flashes H, select low voltage production L(ow), M(medium), and High) by clicking the SET button. The factory default is set to High) protection.

H should be set when the product is connected to car power, and M or L should be set when it is connected to a portable battery or other backup battery. Because of the different output voltages between vehicles, the battery gear can be set from H to M or from M to L if there is a voltage protection code F1 shown on the panel. The battery gear should be set to H if the product will keep working after turning off the car engine, or if the product may drain the battery.

SMART CONTROL – FRIDGE APP INSTRUCTIONS

Downloading the “BRASS MONKEY” Application

• Using a pre-installed QR reader on your handheld smart device scan the QR code in the manual or on the carton, or search for the “BRASS MONKEY” APP in the iTunes App Store (for Apple devices) or Google Store (Android Devices)
• Start the application and select the “Search” function.
• The application will prompt you to pair the fridge by pressing the “set button ” on the fridge’s control panel. Once the “set button “has been activated, the fridge will be paired with your smart device and the application will switch to a control panel allowing you to control the fridge’s functions.

CLEANING & MAINTENANCE

• Be sure to cut off all input power before cleaning the appliance.
• Clean the appliance inside and out with a damp cloth once a week. If it is dirty, sodium bicarbonate dissolved in lukewarm water can be used to clean it.
• Never use abrasive products, detergents, or soap. After washing, rinse with clean water and dry carefully. Do not leave the refrigerator shut off, warm inside, or with food inside or lid closed.
• Never clean the appliance under running water or in dishwater. Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the refrigerator.

TROUBLESHOOTING

• The product is not working:
  • Check the power supply is working
  • Check if the plug and socket are connected
  • Check the fuse
  • Check the power switch on the control panel is on
  • Compressor starts delay protection for 3 minutes after turning on
• Food inside the product is frozen:
  • Temperature is set too low
• Water flowing sound inside the tank:
  • The Refrigerant is flowing, this is normal
• Water drops around the case or door gap:
  • When moisture in the air meets the lower temperature case, it will naturally become liquefied and condensed. Wipe away with a towel or soft cloth
• Code F1 displayed:
  • Low voltage protection, which can be solved by setting the battery protection button from H to M or from M to L
• Code F2 displayed:
  • Fan overload protection. Please turn off the product and restart it after 30 minutes. If the code displays again, please contact the place of purchase
• Code F3 displayed:
  • Compressor frequent start protection. Please turn off the product and restart it after 30 minutes. If the code displays again, please contact the place of purchase
• Code F4 displayed:
  • The compressor is overloaded or working at a low speed. Please turn off the product and restart it after 30 minutes. If the code displays again, please contact the place of purchase.

The warranty for this product is 3 years from the date of purchase. During the warranty period, the following are excluded from coverage:

• Intentional damage
• Damage by fire, flood, etc
• Damage or malfunction caused by incorrect usage and not following this user manual
• Damage or malfunction caused by disassembling

REFERENCE LINK

https://www.jaycar.com.

https://www.jaycar.com.au/75l-brass-monkey-portable-low-profile-dual-zone-fridge-freezer/p/GH1680