SACKit Go 150 Portable Bluetooth Speaker User Manual
IMPORTANT SAFETY INFORMATION
We are not responsible for damage caused by failure to comply with the instructions or irresponsible use of the product. Damage caused by failure to comply with the instructions will not be covered by the warrant.
- Do not disassemble or replace any parts of this device. Please contact professional maintenance or qualified service center if there is any damage to the device
- Please shut down the speaker in lightning weather
- Do not use excessive force when using the control buttons
- To prevent overheating, please do not install the speaker in enclosed spaces.
- Before the product is connected to a power supply socket, please ensure that the voltage of the power supply and the speaker matches.
BOX CONTENTS
- 1 x SACKit Go 150 speaker
- 1 x Quick start guide
- 1 x USB charging cable
Play music via Bluetooth
- Turn on the speaker clicking the Power Button
- Turn on Bluetooth on the device, you want to connect to the speaker
- Choose ”SACKit Go 150” in the Bluetooth settings on your device
- Start playing music from your device
- Nod your head and dance
Connect two SACKit Go 150 speakers
If you have two SACKit Go 150 speakers, it is possible to connect them into a stereo pair:
- Power on both speakers clicking the Power button
- Quickly click the Power button three times to enter pairing mode. Repeat this for both speakers
- The speakers will connect in a few seconds. A constant green light indicates correct connection.
CHARGING THE SPEAKER
- Before you use the speaker the first time, please use the included USB charging cable to charge the SACKit Go 150 speaker fully.
- When charging, a red indicator light is flashing. When fully charged, the red indicator light will turn off.
Note:
- Please use an appropriate adapter for charging
PLAY MUSIC VIA BLUETOOTH
- Click the Power button to turn on the speaker. The indicator light will flash white, and you will hear a “beep” sound. This indicates that the speaker is in Bluetooth pairing mode, and ready to connect.
- Turn on Bluetooth on the device, you want to connect to the speaker
- Choose ”SACKit Go 150” in the Bluetooth settings on your device.
STEREO PAIRING
CONNECTING TWO SACKIT GO 150 SPEAKERS
If you have two SACKit Go 150 speakers it is possible to create a stereo pair with one speaker playing left channel, and one speaker playing right channel.
- Power on both speakers clicking the Power button
- Click the Power button three times to enter pairing mode. Repeat this for both speakers
- The speakers will connect in a few seconds. A constant green light indicates correct connection, and you will hear the message “connected”
FACTORY RESET OF SACKIT GO 150
To reset SACKit Go 150 you have two follow these steps:
- When the speaker is powered on press the following combination on the power button: Double press, single press, double press, single press
- When the combination has been pressed correctly a number combination would be heard from the speaker, this means that your device has been reset
OPERATION INSTRUCTIONS
- Short press/click: Power on
- Long press: Power off
- Short press three times: Enter/exit stereo pairing of two SACKit Go 150 speakers
- Short press: Answer the call
- Double click: Refuse to answer the call
- Short press: End the call
Bluetooth connected:
- Short press: Play/pause music
- Double click: Disconnect Bluetooth
Bluetooth disconnected:
- Double click: Automatic connect back
CHANGING THE FRONT
Change up the look of your speaker with the changeable front – do you want it classic chic, matching the color of your sofa or should it pop with an eye-catching color? It’s up to you!
- Remove the front by lifting the right side of the front.
- Attach the new front by placing the “sticks” into the matching holes. Press the front onto the speaker all the way around the edges – and your new look it ready
CLEANING THE PRODUCT
- Please turn off the speaker before cleaning it.
- Do not use volatile solvents. This type of chemicals may damage the product.
- Please use a damp cotton- or microfiber cleaning cloth.
- Water and fluids may cause malfunction to the speaker.
TROUBLESHOOTING
If the solutions below do not help your problem, please contact customer service at info@sackit.dk.
No sound from my SACKit Go 150 speaker
- Please make sure, that the speaker is charged
- Try to increase the volume on your Bluetooth device
- Please reselect the SACKit Go 150 on your Bluetooth device
My SACKit Go 150 speaker murmurs
- Please make sure that the speaker and your Bluetooth device is within 10 meters of each other
I cannot turn on/charge my SACKit Go 150
- Please make sure that the adapter and the charging cable is connected correctly
- Please check the power adapter voltage and current demand
Bluetooth connection failed
- Please make sure, that the SACKit Go 150 speaker is in correct Bluetooth pairing mode. If the speaker is not in correct pairing mode, please long press the Power button and pair again.
- Please make sure, that the speaker and your Bluetooth device is within 10 meters of each other
TECHNICAL SPECIFICATIONS
- Model: SACKit Go 150 Bluetooth speaker
- Speaker: 1x 1.5 inch full range speaker, 3.5 ohm
- Frequency response: 120Hz-16KHz (-10dB)
- Power amplifier: Class D @3W x 1CH
- THD: < 10%
- SNR: ≥75dB(A)
- Play mode: Bluetooth 5.0
- Charging input: DC 5V, 1A (Micro USB)
- Battery: Lithium battery 950mAh/3.7V
- Bluetooth version: V4.2
- Bluetooth maximum power transmitted: <20 dBM
- Bluetooth frequency bands: 2402 – 2480 MHz
- Hands-free: DSP MIC hands-free system
- Product size: 98×90×44.5 mm