LookCam H.264-1080P Remote Wireless Camera User Manual
Operating Instructions
Thank you for having chosen this product. This camera adoptsaunique ultra-portable design, which enables it to be appliedinvarious fields and brings you convenient, safe and colorful dailylife. Please follow the steps in the instructions to set up your cameracorrectly.
- Press the ON/OFF key to turn on the camera. Press the ON/OFFkey for 3 seconds to turn it off. (When the camera is on, you may press Reset for 5 secondstorestart the camera for factory settings)
Mode represented by key indicator
Red light is power indicator, which is always on when the power ison. Blue light is WIFI indicator. Specific mode is as follows:
- Point-to-point mode: Blue light flashes slowly
- Configuration of remote camera completed: Blue light is alwayson
- If you are not clear what mode it is, reset the cameraandswitch to point-to-point mode. Note: This reset works only when the blue light is alwaysonorflashes slowly. Press the Reset key for about 5 secondsuntil the indicators all go out, and let go until the camera starts(about 30 seconds)
- Download APP software
- Method 1. Scan the QR code (Figure 1), and enter the downloadpage (Figure 2). Choose to download the software accordingtothe system of the mobile phone. Download and install the computer client through the download address http://lookcam.ffvv.xyz:8800/lookcam_download.html
- Method 2. For Android, search for APP software called LOOKCAMon Google Play, and download and install it. For Apple, search for APP software called LOOKCAMin AppStore, and download and install it.
Note: If you scan with WeChat, when (Figure 2) appears, clickthebrowser in sharing in the upper right corner to open anddownloadthe software. After downloading and installing, the following icon appearsonthemobile phone
Point-to-point connection of mobile phone to camera
- Enter the mobile phone WI-FI settings, find number) and connect. As shown in the figure
- After the UID of the device is connected, open the phone APP(LOOKCAM). (As shown below)
- Click Cancel point-to-point short-range viewing (point-to-point is connected and viewingallowed) and click Yes to fast pair router and enter remote viewing (If you need to set upremote, please continue to read the instructions and follow the steps)
Set up the camera remote
When point-to-point video can be viewed, return to the previouslevel and enter the interface as shown in the figure. Click the setup icon → Advanced Configuration →WiFi Connection Configuration →FindWiFi → Enter Password → Click OK and the camera will restart automatically. (Wait for the camera to restart (about 40 seconds). The camera will change fromoffline to online, at which time the viewable video can be accessed remotely.)
Note: When connecting to remote, make sure you enter thecorrect WIFI password. Otherwise, the camera will restart automatically after clicking OK. However, due to the wrongpassword, the camera will not be online, and then youneedtoreset it and re-pair.
Resolution Ratio 1080P/720P/640P/320P
Video Format AVI
Frame Number 25
Visual Angle 150 /90 degree
Motion Detection Camera
Shooting
Straight line 6 meters
Minimal Illumination 1LUX
Video Duration Over 1 Hours
Compressed Format H.264
Recording Range 5㎡
Consumption 380MA/3.7V
Storage Temperature -20-80 degree centigrade
Operating Temperature -10-60 degree centigrade
Operation Humidity 15-85%RH
Memory Card Type TF card
Player Software VLCPlayer/SMPlayer
Computer Operating
System
Windows/Mac OS X
Mobile Phone Operating
System
Android/iOS
Web browser
IE7 and above,chrome,firefox safari.etc
Largest customer 4
Specifications and parameters
Reminder: What Micro SD Card is required for recording?Whycan’t I use my Micro SD Card for recording? The camera supports up to 128 GB Micro SD card. Please use High Speed Class 10 FAT formatted memory card. You must format the MicroSD before using. If SD card is not recognized when inserted into camera, just remove and re-insert.
Why can’t the camera go online?
- Powerless.
- Check if your router is working properly or not. 3. Weak Wi-Fi signal.
- Wrong password wrong while Wi-Fi setting Why is remote monitoring not smooth? You should choosea suitable resolution to watch according to your internet speed. Why I can’t save to my SD card? SD Card must be formatted if this is your first time to use it. How do I when I forgot my password? Press reset key for 10 seconds and restore the factory setting.
- The initial password for each camera is 123456. Please changethe password to ensure the security of your camera.
- If the camera cannot be connected to the router, pleasereset, and connect the hot spots before completing the configuration.
REFRENCE LINK
Can Look Cam recordings be fast forwarded
How to configure to save recording on alert and then access via iphone?